Your chimney chase capped right in East Bronson, FL

Soft siding or rot under a rusty cover? Get a free inspection in East Bronson and see what the chase needs.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Animals getting in through the top

Hearing scratching inside the chase? A rusted-through chase cover, or a gap where it no longer meets the chase edge, gives animals a way into the chase and sometimes down to the fireplace.

Nothing gets sealed until our pros have found every hole and gap in the cover and made sure the chase is empty. If something is, our animal removal specialists handle that first. Then the new cover goes on, fitted tight to the chase edge. Nothing is sealed in, and the new cover fits tight on every edge. Reserve a chase check for the noises in East Bronson by phoning (352) 675-6366.

About 21 miles, measured point to point, lie between East Bronson and the Gainesville reference point. Our specialists serve East Bronson as part of Levy County.

What's Included

Every piece of the chase top we replace

Covers made to measure for each chase
Collars sized and placed for each pipe
Multi-pipe chases fitted with matching collars
Old covers hauled away from East Bronson

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Chases on homes being reroofed

If a new roof is going on your home in East Bronson, the chase cover is easiest to replace while the roofers are flashing around the chase base. Our pros coordinate with your roofer, so the chase is sealed top and bottom in one project and the quote shows who does what. Base flashing and cover are finished together. The quote splits the work clearly.

How It Works

Four stops from measure to storm collar

Check lid and box

The cover, collar, storm collar and cap are looked over first, along with the framing beneath.
Measure and order

The chase top is measured on every side, and the cover is made with slope and collars.
Fit and fasten

Soft framing is repaired, and the new cover is set, fastened through the sides and sealed.
Seal and cap

The storm collar is sealed to the maker's instructions and the listed cap goes back on.

Why Choose Us

A family business that knows factory-built chimneys

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

The old cover is removed and hauled away, and the roof below is cleaned.

Your written price is freeThe price for the lid, the collar and anything wrong with the box beneath comes on a written quote, free.
Same-day service is availableSame-day visits are available to cover a leaking chase in East Bronson until the new top arrives.
Family owned and runA family-owned business that measures twice so your chase cover fits the first time.

Call (352) 675-6366 Get a Free Inspection

Caulk around the pipe isn't the fix

It's tempting to caulk the pipe tight to the collar and call it done. Majestic's instructions warn against caulking the chimney pipe to the chase top collar, since the pipe needs to move as it heats and some systems rely on air moving around it.

The storm collar is what sheds water from that gap, and it's sealed to the pipe the way the chimney maker describes.

Our specialists follow each maker's instructions for which joints get sealant and which stay open. Sealing the wrong gap can damage the chimney, so the manual for your model is read before any caulk comes out.

Keeping animals out of the chase

A rusted hole in the cover, a gap at the edge or a missing storm collar can give animals a sheltered route into the chase. From there, some find their way down toward the fireplace.

Before a new cover goes on, our pros make sure nothing is nesting in the chase, since sealing it up with an animal inside creates a bigger problem. If something is there, our animal removal specialists deal with it first.

The new cover then fits tight on every edge, and the listed cap on the pipe keeps the flue itself closed to them. Nothing gets sealed inside.

Telling the cover from the cap

Factory-built chimneys have a chase cover and a chimney cap, separate parts that fail separately. The cover is the flat sheet on top of the framed box; the cap is the listed hood on the pipe.

Rust streaks on the siding and water inside the chase point to the cover. Rain coming straight down the pipe, a missing screen or smoke problems point to the cap.

Both parts get a look on every visit and a price on their own lines, so you don't pay to replace a sound part while the failing one keeps leaking.

Free Inspection

What we look at on top of the chase in East Bronson

Slope of the cover and whether it sheds water to the edges
Turndown, drip edge and how the cover laps over the siding
Pipe height above the roof against the maker's rule
Siding and stains down the sides of the chase

Claim 10% off your first service

Seal the chase in East Bronson with a first booking and claim 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Asked about chase covers in East Bronson

Can you fit a new cover on the same day?

Chase covers are made to measure, so the first visit measures and the second fits. If the chase is leaking now, our pros can cover the top in the meantime.

Should I choose galvanized or stainless?

Galvanized costs less and lasts well if it slopes and sheds water. Stainless costs more, lasts much longer and doesn't need painting. Our specialists price both.

Our Services