Electric fireplace repair for Gainesville homes, family run

Electric fireplaces are simple next to wood or gas, yet they still act up: a heater that blows cold air, a flame effect that stalls or goes dark, a remote that won't pair, a unit that trips its own safety cutoff. Our family-run local techs trace the fault through the element, fan, thermal cutoff, flame motor, lights and control board using the maker's manual and parts, and the free inspection starts with your model number.

• Electric fireplace heater repair for elements and fans
• Flame-effect motors and light strips replaced
• Thermal cutoffs and control boards tested and replaced
• Retired-firebox units covered by electric fireplace insert repair
• Remote and wall controls paired and working again

1. Read the model plate

   Our pro finds the model number and pulls the maker's manual and parts list.

   01

2. Test each part in turn

   Element, fan, thermal cutoff, flame motor, lights and board are metered against the manual's values.

   02

3. Fit the maker's part

   The replacement goes in wired and fastened the way the manual shows.

   03

4. Run it with you

   Heat, flame effect and controls go through every setting before we leave.

   04

Our pros trace the trouble to the failed part, and the manual shows which parts can be replaced.

The maker's replacement parts

Elements, fans, cutoffs, motors and boards from the parts list for your model, keeping the unit as its maker built it.

Flame-effect parts

Motors, reflectors and light strips that create the flame look, matched to the model.

Controls and remotes

Receivers, remotes and wall controls from the same maker, paired per the manual.

1. 01

   The part that's out

   A remote or light strip is a small fix; a control board or heater assembly costs more.

2. 02

   Parts on hand for your unit

   Current models have parts on hand, while discontinued units may need a search.

3. 03

   How the unit is installed

   Built-in and recessed units may have to come out of the wall to reach the failed part.

• The model plate, manual and parts list for your unit
• Element, fan and thermal cutoff, each put on a meter
• Flame-effect motor, lights and reflectors
• Control board, remote and any wall control
• The outlet or hardwired connection, checked for heat marks
• Air intakes and outlets, checked for dust and blockage

• Warm setting on, cold air out

  The heater element or its thermal cutoff has failed. We test both and replace the part that's out.

• Flame effect frozen or dark

  A stalled flame motor, dead light strip or control fault. Our pros trace it with the maker's manual.

• The unit keeps shutting itself off

  Its overheat cutoff is tripping, sometimes from dust or a blocked air path. We clean, test and replace parts as needed.

• The breaker trips when heat comes on

  The unit may draw more than the circuit carries, or a part has shorted. We test the unit; circuit work goes to an electrician.

• Fireplace Repair and Service Fireplace faults fixed, from firebrick and dampers to hearths and smoke.
• Firebox Repair Worn firebrick and gaps in the brick box your fire burns in.
• Fireplace Hearth Repair Cracked, loose or undersized hearths and hearth extensions in front of the fire.
• Chimney Damper Repair and Replacement Dampers that stick, rust, warp or rattle, handles included.
• Prefab and Zero-Clearance Fireplace Repair Panels, metal fireboxes and chimney pipe on factory-built fireplaces.
• Fireplace Restoration Neglected fireplaces brought back to safe, working order and their original look.

• Blowing cold air? Why your electric fireplace won't warm up Cold-air problems tend to come down to a setting, a safety cutoff or a dusty intake. Work through them in order, and stop when the unit tells you it needs a repair.

Chimney Guides