Prefab fireplace repair around Gainesville, family run

A prefab, or zero-clearance, fireplace is a factory-built metal box with its own listed chimney pipe, tested together as one system. Its refractory panels crack, its metal parts rust or warp, and pipe sections can separate. Our local specialists, family run, repair it with the maker's listed parts only, so the unit stays within its listing, and the free inspection starts by reading the label inside your fireplace.

• Refractory panel replacement using only listed parts
• Zero clearance fireplace repair for warped metal liners
• Prefab chimney repair for separated or damaged pipe sections
• Metal chimney repair using the chimney maker's parts
• Factory built fireplace repair checked against the unit's label

1. Find the label and model

   Our pro locates the unit's label, reads the model and pulls its parts list and manual.

   01

2. Inspect panels, box and pipe

   Refractory panels, the metal firebox, the chimney sections and the top are checked against the manual.

   02

3. Fit the listed parts

   Only parts the maker lists for your model go in, installed the way its manual shows.

   03

4. Check clearances, then test

   Clearances around the pipe are confirmed and the unit is checked in use with you.

   04

A prefab unit gets repaired while listed parts exist and the box is sound.

Listed refractory panels

Panels made for your model by its maker, since the unit was tested with those exact parts.

Listed chimney sections

Chimney sections, supports, firestops and terminations permitted by the actual appliance and chimney instructions.

The maker's fasteners and trim

Clips, screws and trim pieces from the parts list, so everything seats as it was tested.

1. 01

   Which parts are needed

   A set of panels is a simpler job than pipe sections inside a chase.

2. 02

   Parts availability

   Some models have parts on the shelf; discontinued ones may need a search or a replacement unit.

3. 03

   Access to the pipe

   Pipe sections behind finished walls or in a tall chase take more work to reach.

• The unit's label, model and listing
• Refractory panels, checked against the manual's crack limits
• The metal firebox, checked for rust, warping and burn-through
• Chimney pipe sections and joints, as far as they can be seen
• The chimney top and its listed cap
• Clearances between the unit, the pipe and nearby framing

• Cracks across the refractory panels

  Panels wear with heat. The unit's manual sets when a cracked panel has to be replaced, and our pros follow it.

• Rust or warping in the metal box

  Water or overfiring has damaged the steel. We check if listed parts can fix it or the unit is past repair.

• Stains around the chimney pipe

  A pipe joint may have pulled apart. We reconnect or replace the sections with the maker's listed parts.

• No label you can find

  Without it, the listing can't be confirmed. Our pros look for the model markings and track down its parts.

• Fireplace Repair and Service Fireplace faults fixed, from firebrick and dampers to hearths and smoke.
• Firebox Repair Worn firebrick and gaps in the brick box your fire burns in.
• Fireplace Hearth Repair Cracked, loose or undersized hearths and hearth extensions in front of the fire.
• Chimney Damper Repair and Replacement Dampers that stick, rust, warp or rattle, handles included.
• Fireplace Restoration Neglected fireplaces brought back to safe, working order and their original look.
• Electric Fireplace Repair Heating, flame and control faults on electric fireplaces and inserts.