Chimney flue repair for Gainesville homes, handled locally

Your flue is the clay-tile passage that carries smoke and heat up and out of the house. Once tiles crack or the joints between them open, heat and gases can reach the brick and framing around it. Local pros from our family business pinpoint where the flue failed, then replace tiles near the top, resurface it with a listed system, or recommend a new liner when repair won't hold. Your free inspection covers the whole run.

• Flue tile repair near the top where tiles have cracked
• Chimney flue tile replacement for broken top sections
• Listed coatings for chimney flue resurfacing
• Open joints between flue tiles filled and sealed
• A relining quote when the flue can't be made sound

1. Look down the whole flue

   Every tile and joint gets a look, from the smoke chamber up to the top of the chimney.

   01

2. Pick the repair route

   Top tiles get replaced, scattered cracks get a listed resurfacing, and badly failed flues get a relining quote.

   02

3. Replace or resurface

   Broken top tiles are cut out and new clay tiles set in refractory mortar, or the resurfacing coat goes on per its listing.

   03

4. A second look when it's done

   The repaired flue is inspected again, and you see the finished lining for yourself.

   04

Where the damage sits and how far it runs decide the repair.

Clay flue tiles to ASTM C315

Replacement tiles to the same standard as the originals, sized to the flue and set in refractory mortar.

Listed resurfacing systems

Cast-in-place or ceramic coatings tested to UL 1777 and used only for the appliances their listing names.

Refractory mortar for tile joints

ASTM C199 mortar for tile joints, the heat-rated product the code calls for in flue work.

1. 01

   Where the damage sits

   Tiles near the top can be reached and replaced; damage deep in the chimney needs resurfacing or relining.

2. 02

   How many tiles are affected

   One cracked tile is a small job, and cracks along the whole flue change the approach.

3. 03

   Flue size and shape

   Odd sizes or offsets in the flue can limit which systems fit.

4. 04

   What burns below

   The appliance on the flue decides which resurfacing listings or liner sizes qualify.

• Every tile and joint from the smoke chamber to the top
• Cracks, spalled faces and gaps between tiles, marked by location
• The top tile and the crown around it
• What appliance vents into the flue and what it needs
• Deposits that need clearing before any repair
• Chimney liner repair options, from new tiles to relining

• Bits of tile on the smoke shelf

  Flue tiles are cracking or shedding their faces. We find where, then choose between new tiles, resurfacing or relining.

• A home inspector flagged the flue

  We look along the full length to confirm the damage and size the repair before you decide anything.

• Smoky odor in a room upstairs

  Gaps between tiles can let smoke into the chimney walls and beyond. Hold off on fires until our pros have checked and sealed the flue.

• Chimney Liner Installation and Relining A listed liner matched to the fireplace or insert above it.

• The appliance you burn picks your liner, and its price An open fireplace, wood insert and gas appliance can need different venting arrangements. The approved system, chimney condition, route and access shape the estimate.

Chimney Guides