Your chimney crown made watertight in Bell

Choose crown repair from the findings, with your estimate in writing and a free inspection in Bell.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Rust stains on the crown

Spotted rust-colored stains on the crown, or cracks that run in straight lines? Steel set inside the concrete may be rusting. Rust swells, and inside concrete it pushes the crown apart from within.

Where the stains and cracks run tells our specialists a lot, and if the steel is corroding, sealing the surface won't stop it for long. A new crown with the steel placed properly, or a precast crown, is the real fix. You'll hear the reason for the recommendation and see the price. Ask about a rust-cracked crown on your chimney in Bell by phoning (352) 675-6366.

The 2020 Census put the population of Bell at 518. Bell lies inland from the Gulf and Atlantic coasts.

What's Included

Crowns our pros put right in Bell

Open cracks cleaned out and filled
Mortar-wash tops replaced with real crowns
Flue tile seals cut out and redone flexibly
Crown repairs in Bell backed by our warranty

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Getting the crown done with a reroof

Replacing the roof on your home in Bell? The crown is easiest to repair while the roof is being worked on, and the new flashing will seal against a chimney that's already sound. Our pros coordinate with your roofer so the crown work is finished and cured before the new flashing and roofing go on around the chimney. That order keeps the new flashing sealing against sound masonry.

Our Process

Crown work in Bell, in the order it's done

Read every crack

Our pros sort the cracks, check the slope, edge and flue seals, and look for rust inside.
Choose seal or rebuild

You see a coating, a patch and a new crown priced side by side where each fits.
Repair in the right weather

Coatings go on dry crowns; new crowns get forms, reinforcement, slope and a drip edge.
Cure and show you

The crown is covered to cure, flue joints are sealed, and you get the waiting time written out.

Why Choose Us

Crown pros who read the cracks first

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Curing time for your crown in Bell is written on the quote before work starts.

Your written price is freeYou get free written prices for sealing and for rebuilding, side by side.
Family owned and runFamily owned, and we build crowns in Bell the way we'd want our own built.
Our workmanship warrantyEach crown we seal or rebuild is listed on the quote with our workmanship warranty beside it.

Call (352) 675-6366 Get a Free Inspection

Getting a crown ready for a coating

A flexible crown coating only works on a crown that's ready for it. Maker data sheets, such as the one for CrownCoat, call for a sound, clean and dry surface, with wider cracks filled first and the flue tile taped just above its base so the coating finishes cleanly there.

Our specialists scrub off moss, soot and loose material, let the surface dry, fill the cracks the coating can't bridge, and check the weather. Coatings have a temperature window and need a dry spell after application. Skipping any of those steps is why some coatings peel within a season. Our pros also note on the quote which coating they'll use.

Overhang and drip edge

Water running off a crown that stops flush with the brick flows straight down the chimney face, soaking the brick and mortar below. A crown that projects past the brick, with a drip groove or edge underneath, throws that water clear.

That's why the Florida Building Code calls for a drip edge on a masonry chimney cap. Our specialists form new crowns with an overhang on every side and a drip cut or formed into the underside. It's a small detail that keeps the whole chimney drier and makes the brick and joints last longer. The overhang also shelters the top joints of the brick.

A flexible joint at each flue tile

The flue tile and the crown heat and cool at different rates, and the tile gets much hotter. If the concrete is poured tight against the tile, one cracks the other as they move. That's why the Florida Building Code asks for a caulked separation at each liner, following ASTM C1283.

Our pros wrap each tile with a bond-breaking material before pouring, then finish the joint with a backer rod and flexible sealant after the concrete sets. On an existing crown with rigid mortar packed against the tile, they cut it out and make the same flexible joint. The sealant is named on the quote.

Free Inspection

What the free crown check looks at

Cracks across the crown, sorted into hairline, open or loose
Overhang past the brick and whether a drip edge is there
Height of each flue tile above the crown, and any broken tops
Precast or poured in place, and which suits the chimney

Claim 10% off your first service

Seal or rebuild the crown in Bell; a first booking is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Which crown fix do you need?

What's wrong with a mortar crown?

A thin mortar layer cracks quickly and its feathered edge breaks away. The Florida Building Code wants the top in concrete, metal or stone, pitched to shed water and finished with a drip, and our pros build crowns to that standard.

Does crown repair come with a warranty?

Yes, our workmanship warranty covers the crowns we seal or rebuild, and the quote records exactly what was done. Reserve your free crown inspection in Bell at (352) 675-6366.

Our Services