Leaky chimney flashing in Hague? Ask our pros

Stop the drip at the source. Local chimney flashing repair for homes in Hague, with a free look from our pros first.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

The attic tells the story first

Before a stain reaches your ceiling, the attic tends to show it. Dark streaks on the roof boards beside the chimney, wet insulation or rusty nail tips all point to water getting past the flashing above.

Where there's access, the attic side of the chimney is part of every flashing inspection. What our pros see there tells them which side of the chimney to focus on outside and how long the leak has been going on. Wet insulation should be replaced once the leak is fixed, and your quote says who handles it. Ask for a flashing and attic check in Hague at (352) 675-6366.

About 8 miles, measured point to point, lie between Hague and the Gainesville reference point. Our specialists serve Hague as part of Alachua County.

What's Included

Every piece of your flashing repair

Back-side width measured against the cricket rule
Old tar patches removed and the real fix made
Sealant renewed with masonry-rated products
Joints repointed before new counter flashing

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Flashing on an unused chimney

Even if the fireplace in your home in Hague hasn't been lit in years, the flashing around the chimney still keeps rain out of the roof. It wears out whether the chimney is used or not. Our specialists check it along with the rest of the chimney top and price any repair, so an idle chimney doesn't become the source of a leak.

Our Process

Four sides, one careful repair

Attic and all four sides

The attic below is looked at first, then every side of the flashing on the roof.
Choose reseal or replace

You get each side given a written price, with the reason for the fix we recommend.
Mortar first, then metal

Joints are repointed, base and step pieces fitted, and counter flashing set into the brick.
Seal, show and clean up

Joints are sealed, you see the finished work, and every scrap of old flashing leaves with us.

Why Choose Us

Mortar first, then the metal

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Each side of the chimney is priced on its own, so you only pay for what's failing.

Our workmanship warrantyOur workmanship warranty covers the flashing we fit on your chimney in Hague.
Your written price is freeThe flashing estimate is free and written, side by side for each face of the chimney.
100% satisfaction, guaranteedFlashing we fixed still letting water in? We return. That's our 100% satisfaction guarantee.

Call (352) 675-6366 Get a Free Inspection

Flashing where metal roofing meets brick

Metal roof panels expand and contract more than shingles, and their raised ribs make a chimney joint harder to seal. Roof makers publish their own chimney details, with formed flashing and closure strips shaped to the ribs.

Working from the maker's details for your panel type, our pros set the counter flashing into the brick and use sealant that stays flexible as the metal moves. They also check that the metals used won't react with each other or with the roof's coating. Work on the panels themselves stays with a roofer, and the quote spells that out. Formed pieces come from the roofing maker's own line where they're available.

Masonry work and roofing work overlap at the flashing. Our specialists handle the chimney side: the counter flashing set into the brick, repointing the joints it sits in, and the flashing pieces themselves when the roofing around them is sound.

When shingles, tiles or roof boards around the chimney are damaged, a roofer replaces them. Our pros will tell you when that's the case, coordinate the order of work, and make sure the quote shows who does each part. Working together on the same day where possible keeps the roof open for the shortest time. You get one quote that shows both halves.

New roof, new chimney flashing

When a roof is replaced, reusing old chimney flashing is a gamble. The base pieces get bent lifting them out, the old counter flashing may be surface-mounted or rusted, and the new roofing may sit at a different height.

Our pros recommend new flashing with a new roof, timed so the chimney work is ready when the roofer reaches that part. Repointing and reglet cuts happen first, then the base and step pieces go in with the roofing, and the counter flashing goes on last. Getting the order right is half the job. Our specialists can meet your roofer on the roof to agree the sequence before work starts.

Free Inspection

Our free look at the roof line in Hague

Step or continuous flashing along each side of the chimney
Whether counter flashing sits in a mortar joint or on the brick face
Chimney width across the slope, measured against the cricket rule
Siding and water barrier where a chase meets the roof

Claim 10% off your first service

Seal the roof line in Hague, and a first repair is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Common flashing questions in Hague

What signs point to the flashing?

A stain right beside the chimney, wet boards along one side in the attic, or a leak only in windy rain all point to flashing. Our specialists confirm it on your free inspection and can run a water test if needed.

What happens if the flashing leaks after you fix it?

Our pros come back and put it right, since our workmanship warranty covers the flashing we fit. The quote notes which sides were resealed or replaced, so it's clear what's covered. Book a free flashing inspection in Hague at (352) 675-6366.

Our Services