Your chimney checked top to bottom in Archer

Your chimney in Archer, inspected free from the cap down to the firebox, with anything worth fixing given its own price.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

The yearly look a chimney needs

Use the fireplace every season? The national fire code for chimneys, NFPA 211, calls for a yearly inspection, because deposits, loose mortar and small gaps build up quietly between fires. A year is long enough for a crown to crack or a cap to work loose without anyone noticing from the yard.

Roof first, then the rooms inside and the attic where there's access, and at the end you'll know what's sound and what isn't. If everything looks good, you'll hear that as clearly as you'd hear about a problem. Reserve your yearly chimney inspection in Archer at (352) 675-6366.

Our Archer coverage is inland from the Gulf and Atlantic coasts. From the Gainesville reference point, Archer is about 14 miles away in a direct line.

What's Included

Roof, flue, firebox and attic

Flue lit up and looked at joint by joint
Firebox and hearth checked for cracks and gaps
Stove connectors and thimbles checked against NFPA 211
Pre-sale inspections timed to your closing in Archer

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Inserts that heat the house

Where a wood insert carries real heating duty in a home in Archer, its liner and the chimney around it see a lot of fire. The liner connection, the top plate and the flue all get extra attention on an inspection. Our specialists check that the liner is sealed at both ends, that the insert's surround is tight, and that deposit hasn't built to the point where a sweep can't wait.

How It Works

What happens on an inspection in Archer

A few questions, then outside

We ask what you've noticed, then check the chimney from the ground and the roof.
Inside, firebox to flue

Firebox, hearth, damper, smoke chamber and flue get a light and a mirror, and you can watch.
Attic and connections

Clearances, fireblocking and any stove or insert connection within reach are checked.
Findings in writing

Our pros explain the findings and provide a written estimate for any proposed repairs.

Why Choose Us

Clear answers about your chimney in Archer

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Findings are split into urgent and can-wait, so you can plan repairs around your budget.

Free inspection firstInspecting costs you nothing for homes in Archer; you only pay for repairs you choose to make.
Locally owned and operatedWe're locally owned, so the pro who inspected your chimney can return for the repair.
Same-day service is availableSame-day inspections are available when the schedule has room, handy before a closing.

Call (352) 675-6366 Get a Free Inspection

Does the flue match the fireplace opening?

Smoke from a big opening needs a flue with room to carry it. The Florida Building Code sets the ratio: for a round flue, no less than one twelfth of the opening's area, and for a square one, no less than one tenth. A flue smaller than that struggles on every fire.

When a fire smokes into the room for no clear reason, our specialists measure the opening and the flue and do that arithmetic. An undersized flue can't keep up, and the fix might be a smaller opening, a taller chimney or a change of appliance. You'll get the measurements and the options, rather than a guess.

Partitions between flues in one chimney

Where several flues occupy one chimney, their required separation depends on the configuration and applicable code provisions. Some arrangements have specific exceptions. Our pros consider the actual connections and visible partitions before recommending work between the flues.

NFPA 211 expects every flue in the chimney to be checked, including ones serving other appliances. Our pros inspect each flue and the partitions they can see, looking for cracks, missing mortar or signs of smoke staining across from one flue into another. It matters most where a fireplace and a furnace share a chimney, since exhaust in the wrong flue can reach a living space. Any gap found is priced for repair.

Furnace and water heater flues in the chimney

Venting a gas furnace or water heater through masonry takes a lining made for that appliance. Under the Florida Building Code, a masonry chimney needs a lining suited to the appliance it serves, and a flue built for a wood fireplace can be too big or the wrong material for gas exhaust.

An oversized flue lets gas exhaust cool and condense, and that moisture works on the mortar from the inside. Our pros check how each appliance flue is lined and sized and look for signs of condensation. If a liner is needed, the options are priced separately, sized to the appliance's own instructions.

Free Inspection

Checked from cap to hearth in Archer

Every visible face of brick and its mortar joints
Air space and fireblocking wherever the chimney meets framing
Connector pipe, thimble and clearances on a stove or insert
Water clues inside, from rust to white deposits and odor

Claim 10% off your first service

Found something on the inspection? Book the work today and claim a 10% discount on your first service.

Call (352) 675-6366 Get a Free Inspection

FAQs

Booking an inspection in Archer

Do you inspect chimneys before a home sale in Archer?

We do, for buyers and sellers. Archer is one of the Alachua County places our pros cover, and a pre-sale inspection comes with the findings noted on the quote, ready to share. Tell us your closing date at (352) 675-6366 and we'll fit it in.

Can a factory-built fireplace be inspected too?

Absolutely. The rating plate comes first, then our pros go through the firebox panels, the metal chimney, the cap and the chase top with the maker's manual in hand. Replacement parts are quoted from the maker's own list.

Our Services