Your chimney checked top to bottom in High Springs

Your chimney in High Springs, inspected free from the cap down to the firebox, with anything worth fixing given its own price.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

The yearly look a chimney needs

Use the fireplace every season? The national fire code for chimneys, NFPA 211, calls for a yearly inspection, because deposits, loose mortar and small gaps build up quietly between fires. A year is long enough for a crown to crack or a cap to work loose without anyone noticing from the yard.

Roof first, then the rooms inside and the attic where there's access, and at the end you'll know what's sound and what isn't. If everything looks good, you'll hear that as clearly as you'd hear about a problem. Reserve your yearly chimney inspection in High Springs at (352) 675-6366.

High Springs has O'Leno State Park nearby. Measured directly, about 17 miles separate High Springs from the Gainesville reference point.

What's Included

Roof, flue, firebox and attic

Crown and cap looked over up on the roof
Smoke chamber and damper looked at through the throat
Maker's manual used to check factory-built parts
Each flue in a shared chimney inspected on its own

Call (352) 675-6366 Get a Free Inspection

Local Conditions

A chimney left idle for years

If a fireplace in High Springs has gone years without a fire, the chimney has had time to collect nests and debris, and the damper may be rusted in place. Our specialists check the flue for blockages, work the damper, and look at the firebox and liner before anyone lights a fire. You'll know what it takes to bring the fireplace back into use, step by step and given a written price.

How It Works

What happens on an inspection in High Springs

A few questions, then outside

We ask what you've noticed, then check the chimney from the ground and the roof.
Inside, firebox to flue

Firebox, hearth, damper, smoke chamber and flue get a light and a mirror, and you can watch.
Attic and connections

Clearances, fireblocking and any stove or insert connection within reach are checked.
Findings in writing

Our pros explain the findings and provide a written estimate for any proposed repairs.

Why Choose Us

Clear answers about your chimney in High Springs

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

You're welcome to watch the inside part of the inspection, and our pros explain what they see as they go.

Free inspection firstInspecting costs you nothing for homes in High Springs; you only pay for repairs you choose to make.
Locally owned and operatedWe're locally owned, so the pro who inspected your chimney can return for the repair.
Same-day service is availableSame-day inspections are available when the schedule has room, handy before a closing.

Call (352) 675-6366 Get a Free Inspection

Stove connector pipe and its joints

On the pipe joining a stove to the chimney, NFPA 211 lists what to check: how it's supported, how its joints are fastened, its pitch, and signs of damage, deterioration, blockage or heavy deposit.

Each of those is checked, plus the clearance from the pipe to nearby walls and ceilings and the spot where the pipe enters the chimney. Rusted sections, loose joints or a pipe that sags back toward the stove are all noted, and your quote says who corrects them. A connector in good order is one of the simplest ways to keep a stove venting properly.

Signs a chimney fire already happened

Some chimney fires burn without a roar. A quiet one still leaves clues behind: puffy, honeycombed deposit in the flue, cracked or shifted tiles, a warped damper, flakes of deposit on the roof or in the yard, and discolored metal on the cap.

Each of those gets looked for, along with the full height of the flue and the framing near the chimney in the attic, and you'll hear what turned up. If a fire has damaged the liner, the fireplace stays out of use until it's repaired or relined, and the options come with prices. No fire goes in before then.

Inspecting before a relining job

Relining starts with a closer inspection under NFPA 211, and it makes sense. A new liner is sized to the flue and to the appliance, and it has to pass any offsets and fit past damaged tile.

Our specialists sweep the flue if needed, then run a light and a measuring piece down to check its size, straightness and condition. They also look at the smoke chamber, the crown and the top of the flue, where the liner will be fastened. The liner options that follow are based on what they found, and each comes with its own price and a note of what it suits.

Free Inspection

Checked from cap to hearth in High Springs

Every visible face of brick and its mortar joints
Hearth size and cracks in front of the opening
Height above the roof against the building code rules
Water clues inside, from rust to white deposits and odor

Claim 10% off your first service

First visit from our pros? Book the work today and claim 10% off it.

Call (352) 675-6366 Get a Free Inspection

FAQs

Booking an inspection in High Springs

Is the chimney inspection really free in High Springs?

Yes. The chimney inspection is free, and any proposed repair comes with a written estimate. You decide whether to book that work.

Can a factory-built fireplace be inspected too?

Absolutely. The rating plate comes first, then our pros go through the firebox panels, the metal chimney, the cap and the chase top with the maker's manual in hand. Replacement parts are quoted from the maker's own list.

Our Services