Andrews chimney relining, sized to the appliance

Relining after a chimney fire or a failed inspection? Book a free inspection in Andrews and see the options written out.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

A liner that lasts

A stainless liner lasts when it's the right alloy for the appliance, sized so the flue stays warm, insulated where it should be, and kept clean. Deposit and condensation are what shorten its life.

Installing to the maker's instructions is step one, and you'll hear how to look after it, from dry fuel to yearly sweeping with the soft brush stainless calls for. A tee cap at the bottom makes checking and cleaning easier. The quote records the liner's make, size and listing for the future. Talk to our relining specialists about a long-lasting liner in Andrews by phoning (352) 675-6366.

Our Andrews coverage is inland from the Gulf and Atlantic coasts. From the Gainesville reference point, Andrews is about 33 miles away in a direct line.

What's Included

Every part of a new liner system

Each liner matched to the appliance below it
Top plates sealed and caps fitted
Liners run through offsets without kinking
Break-in steps written out for homeowners in Andrews

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Trees over the chimney top

If trees hang over your roof in Andrews, leaves and twigs can land on the liner's top plate and cap. A clogged cap screen chokes the draft, even through a new liner. Our specialists fit a cap sized to the liner and check the screen on every sweep, clearing anything that has collected. A hip-shaped cap lid sheds leaves better than a flat one.

How It Works

Relining day in Andrews

Read the appliance

The rating plate and manual come first, then the flue is measured and inspected.
Sweep and prove the path

After a sweep, a test piece is run down the flue to confirm the liner will pass.
Wrap, feed and connect

The liner is insulated where needed, fed down, and connected at the bottom.
Seal the top, explain break-in

The top plate and cap go on, the draft is checked, and you get break-in steps.

Why Choose Us

Flues for inserts, fireplaces and gas appliances

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Local, family-run relining specialists who come back to sweep the liner in Andrews.

Your price, upfrontThe liner, insulation and install are priced up front, before anything is ordered for Andrews.
Our workmanship warrantyThe liner has its maker's warranty, and our workmanship warranty covers how we installed it.
Locally owned and operatedLocally owned, so the liner we install is one we can come back and sweep.

Call (352) 675-6366 Get a Free Inspection

Gas appliance liners, sized by table

Gas furnaces and water heaters are sized for venting by tables in the national fuel gas code, NFPA 54, along with each appliance's own instructions. Those tables weigh the appliance's input, the flue's height and the vent type.

For the same reason, the Florida Building Code points gas flue lining to its own fuel gas rules. Our specialists use those tables and the appliance manuals to pick a liner size, and they check that the liner metal suits the appliance.

An undersized liner can spill exhaust; an oversized one condenses it. Either way, the size chosen, and why, is written on the quote.

The catch with oval liners

When a round liner is too big for a narrow rectangular flue, it can be pressed into an oval. But ovalizing changes the liner's area, and a liner that has lost too much area can't carry the appliance's exhaust.

Liner makers publish how much ovalizing their product allows. Our pros compare the oval size against the appliance's needs before choosing it. If an oval won't keep enough area, the options include a smaller appliance or removing the old tile to make room for a round liner.

You'll see the sizes and the reasoning on the quote, and no liner is forced into a flue that can't take it.

Listed liner systems

The Florida Building Code accepts listed chimney lining systems, tested to UL 1777, as a flue lining for masonry chimneys. The listing covers the liner, its fittings and the way it's installed, including clearances and insulation.

Liners from our pros go in as complete listed systems, following the maker's instructions for each part, from the top plate and cap to the tee and connector. Mixing parts from different makers, or skipping the insulation the listing calls for, breaks the listing.

The make and listing go on your quote, so future inspectors can see what was installed. That record also helps when you sell the house.

Free Inspection

Measured and checked before a liner is priced

Flue size at the top and its height from the appliance
Fireplace opening measured against the flue size rule
Signs of condensation damage in flues that serve gas appliances
Which appliances share which flues in the chimney

Claim 10% off your first service

A new liner, sized and insulated; first-time customers who reserve today claim a 10% discount.

Call (352) 675-6366 Get a Free Inspection

FAQs

Before relining in Andrews, a few answers

Is Andrews on your list for relining?

Yes. Our specialists reline chimneys throughout Levy County, Andrews included, and every job opens with a free look at the flue and the appliance it serves. Knowing what vents into the chimney helps us come prepared.

How do you decide the liner size?

From the appliance. An insert's collar and manual set it, a gas appliance is sized from the gas code's tables and its instructions, and an open fireplace from the building code's ratio to its opening.

Our Services