Relining chimneys for homes in East Williston

Flue measured, path proved and a listed liner fitted in East Williston. You won't pay for the inspection, and the price comes first.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Chimneys with a bend in the flue

Not every flue runs straight. Some chimneys shift over partway up to clear a roof line or a room, and that offset makes a rigid liner impossible to fit. A flexible liner keeps its full round shape through the bend when it's guided properly.

A corrugated flexible stainless liner bends through offsets while keeping its full diameter. Our pros prove the path with a test piece first, then feed the liner through, guiding it around the bend. If the offset is too sharp for the liner size, they'll tell you before ordering, with the options. Ask about lining a chimney with an offset in East Williston at (352) 675-6366.

East Williston recorded a population of 780 in the 2020 Census. East Williston is an inland service location, separate from the sea coast.

What's Included

Relining work included in East Williston

Each liner matched to the appliance below it
Flues proven with a test piece first
Oval liners sized with enough area
Liner make and listing recorded for homes in East Williston

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Chimney fire history in an inland home

A chimney fire can happen in any chimney where deposit builds up, and a quiet one can crack tiles without anyone noticing. Signs show up later on an inspection of a home in East Williston. Our pros look for those signs before relining and fit an insulated liner that protects the masonry, then explain how to keep deposit from building again.

How It Works

Relining, one step after another

Read the appliance

The rating plate and manual come first, then the flue is measured and inspected.
Sweep and prove the path

After a sweep, a test piece is run down the flue to confirm the liner will pass.
Wrap, feed and connect

The liner is insulated where needed, fed down, and connected at the bottom.
Seal the top, explain break-in

The top plate and cap go on, the draft is checked, and you get break-in steps.

Why Choose Us

The appliance comes before the liner

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Every flue is proven with a test piece before a liner is ordered.

Your price, upfrontThe liner, insulation and install are priced up front, before anything is ordered for East Williston.
Our workmanship warrantyThe liner has its maker's warranty, and our workmanship warranty covers how we installed it.
Locally owned and operatedLocally owned, so the liner we install is one we can come back and sweep.

Call (352) 675-6366 Get a Free Inspection

Wrapping the liner in insulation

Selkirk's liner instructions require insulation where the chimney's clearance to combustibles can't be determined, and describe a foil-faced ceramic blanket wrapped with overlapping seams, sealed with foil tape and held with a mesh sleeve.

Our specialists wrap the liner that way before it goes down, checking that the overlap runs the full length. Insulation keeps the flue warmer, which helps the draft and cuts deposit, and it protects the masonry and any framing close to it.

The blanket thickness is the one the liner's listing calls for, and it's named on your quote. Seams face away from where the liner rubs during the feed.

Sealing the top of a relined flue

At the top of the chimney, the liner passes through a stainless top plate that covers the old flue opening and sits on the crown. A clamp holds the liner at the right height, and the plate's edges are sealed so rain can't run down around the liner inside the old flue.

A cap goes on top, sized to the liner and made to fit the plate. Our pros check that the plate sits flat on the crown and that the crown under it is sound, since a cracked crown lets water in around the plate.

Crown repairs, if needed, are priced separately.

The inspection before relining

NFPA 211 calls for a closer inspection before a chimney is relined, and it makes sense. The flue has to be checked along its length, the smoke chamber and crown looked at, and the clearances around the chimney considered, since they decide whether insulation is needed.

Our specialists do that inspection as part of the relining quote. It's also when they confirm the relining is the right fix, and not something else, like a crown or cap problem letting water in.

You'll get the findings noted on the quote along with the liner plan and its price. It's also when water problems at the crown or cap get spotted, so they're fixed before the new liner goes in.

Free Inspection

Rating plate, flue size and offsets, checked free

Flue size at the top and its height from the appliance
Which appliances share which flues in the chimney
Crown and flue top where the liner's top plate will sit
Steps for breaking in the liner you choose

Claim 10% off your first service

Booking your first relining today? Our family business takes 10% off it.

Call (352) 675-6366 Get a Free Inspection

FAQs

Which liner fits your fireplace?

What happens to my damper?

For an insert, the damper is removed or fixed open as the insert's instructions say. For an open fireplace, the liner connects above it and the damper stays in use.

Can I use the fireplace right after relining?

Yes, following the break-in steps your liner calls for, such as smaller fires at first. Our pros give you those steps spelled out.

Our Services