Relining chimneys for homes in Williston

Discuss the appliance, liner and installation scope together. Our local pros offer free inspections in Williston.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Converting a fireplace to gas

Switching a wood fireplace over to a gas appliance? The gas unit's instructions set the venting, and a clay flue built for wood smoke tends to be far too big for gas exhaust. That leads to condensation inside the flue.

Our specialists size a liner to the gas appliance's instructions and fit one made for gas exhaust, sealed at the top. The gas line itself is a gas contractor's work, and your quote says who handles it. The liner and the appliance hookup are planned together, so nothing is missed. Talk to our pros about lining for a gas conversion in Williston by phoning (352) 675-6366.

The Gainesville reference point is roughly 22 miles from Williston as the crow flies. In our service area, Williston is grouped with Levy County.

What's Included

Inside your chimney in Williston, a new liner

Insulation wrapped to the liner's listing
Oval liners sized with enough area
Flues swept before any liner goes in
Break-in steps written out for homeowners in Williston

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Clay flue tiles that have cracked

A clay-tile flue in Williston can crack from years of heat, settling or an old chimney fire nobody noticed, and none of it shows from the firebox. Our specialists inspect the full flue before recommending anything. Where tiles are cracked, a continuous stainless liner restores a sound flue without taking the chimney apart. Relining costs far less than rebuilding to replace old tile.

How It Works

Sizing starts with what you burn

Read the appliance

The rating plate and manual come first, then the flue is measured and inspected.
Sweep and prove the path

After a sweep, a test piece is run down the flue to confirm the liner will pass.
Wrap, feed and connect

The liner is insulated where needed, fed down, and connected at the bottom.
Seal the top, explain break-in

The top plate and cap go on, the draft is checked, and you get break-in steps.

Why Choose Us

Relining from a local family business

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

You get your liner's break-in steps noted on the quote, with what to watch for.

Your price, upfrontThe liner, insulation and install are priced up front, before anything is ordered for Williston.
Our workmanship warrantyThe liner has its maker's warranty, and our workmanship warranty covers how we installed it.
Locally owned and operatedLocally owned, so the liner we install is one we can come back and sweep.

Call (352) 675-6366 Get a Free Inspection

Proving the flue before ordering

Proving the flue before installation is something Selkirk's instructions describe: running a test piece or guide cone of the liner's size down the full length to be sure it will pass.

Our specialists run that test on each relining job. Loose tile, mortar ledges, tight joints and offsets show up during the test, and they're cleared or planned for before the liner is ordered. Sometimes the test shows a smaller liner or an oval one is needed.

It's a short step that prevents the worst install-day surprise: a liner stuck halfway down a flue it couldn't have fit. The result is noted on the quote.

The inspection before relining

NFPA 211 calls for a closer inspection before a chimney is relined, and it makes sense. The flue has to be checked along its length, the smoke chamber and crown looked at, and the clearances around the chimney considered, since they decide whether insulation is needed.

Our specialists do that inspection as part of the relining quote. It's also when they confirm the relining is the right fix, and not something else, like a crown or cap problem letting water in.

You'll get the findings noted on the quote along with the liner plan and its price. It's also when water problems at the crown or cap get spotted, so they're fixed before the new liner goes in.

Relining after a chimney fire

A chimney fire can reach temperatures that crack clay tile along much of the flue, even when the fire itself was brief. Before the fireplace is used again, the flue needs a full inspection, and cracked tile means relining.

After checking the full height of the flue, the smoke chamber, the crown and the framing near the chimney, our specialists recommend a liner insulated to its listing, which also shields the masonry from the heat of the flue.

They'll tell you what caused the fire, from deposit to fuel, so the new liner isn't put through the same thing. A clean, well-fed fire is the best protection.

Free Inspection

Before relining in Williston, a free look

Condition of the clay tile and its joints
Which appliances share which flues in the chimney
Crown and flue top where the liner's top plate will sit
Sweeping needed before the liner can go in

Claim 10% off your first service

Reline the flue in Williston; a first job is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Liner questions from homeowners

Can a liner go through a bent flue?

A flexible stainless liner can pass most offsets. Our specialists prove the path with a test piece first, so you'll know before anything is ordered.

Is relining covered by a warranty?

You get our workmanship warranty on the installation, and the liner carries its maker's warranty under its terms. Reserve your free relining inspection in Williston at (352) 675-6366.

Our Services