Brick and mortar repairs for chimneys in Archer

Cracks in the brickwork explained and priced on your free inspection in Archer, with no pressure to book.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

A crack that splits the bricks themselves

Cracks that cut right through the bricks themselves, instead of following the joints, mean something stronger than weathering is at work. Rusting steel inside the wall, like an old lintel or tie, swells and splits the brick around it. So can a mortar harder than the brick, which forces movement into the units.

New brick in the same spot will crack again if the cause stays, so finding it comes before replacing anything. Rusting steel gets treated or replaced; over-hard mortar gets raked out. Each step is priced separately on the quote. Reserve a look at the cracked brick in Archer by phoning (352) 675-6366.

The Gainesville reference point is roughly 14 miles from Archer as the crow flies. In our service area, Archer is grouped with Alachua County.

What's Included

Your chimney masonry, put right

Flaking bricks cut out and replaced
Stepped cracks traced to their cause and repaired
Painted brick repaired under the peeling finish
Repointing and brick work under our workmanship warranty

Call (352) 675-6366 Get a Free Inspection

Local Conditions

The face that takes the weather

One side of a chimney in Archer takes more wind-driven rain than the others, and its joints wear first. It can need repointing while the sheltered faces are still sound. Our specialists price repointing by face, so you pay for the side that needs it. That face gets checked first on the next visit too. The sketch on your quote marks which face needs the work.

Our Process

Mortar matched before a joint is touched

Find which half failed

Every face is looked over for worn joints, damaged brick and cracks, and the cause is found.
Match mortar and brick

Samples are mixed and cured, and replacement brick is matched and shown to you.
Joints raked, then refilled

Joints are raked to sound depth, repointed in layers, and damaged brick is swapped out.
Cover, clean, cure

The work is covered against rain, the site cleaned, and you get curing time spelled out.

Why Choose Us

Patient, family-run masonry work

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Joints are tooled to shed water and to match the look of your chimney.

100% satisfaction, guaranteedIf the repair doesn't blend in or hold, we make it right. That's our 100% satisfaction guarantee.
Your price, upfrontMasonry work in Archer is priced by section up front, so you can choose what gets done.
Locally owned and operatedA locally owned business, so the masons who repointed your chimney are easy to reach later.

Call (352) 675-6366 Get a Free Inspection

Raking joints to a sound depth

Repointing only lasts if the new mortar has something solid to bond to and enough depth to hold. That means raking out the old mortar until the tool meets firm material, and cleaning the joint of dust and loose grit.

Our pros use hand tools or careful grinding, depending on the joint and the brick, and they avoid cutting into the brick edges, which widens the joint and changes the look. Joints that are only surface-scraped and topped with a thin smear of new mortar fail within a few seasons. The depth they rake to is worked out for your joints each time.

Pre-hydrating repointing mortar

Mortar for repointing gets a different mix routine from mortar for laying brick. The Brick Industry Association describes a pre-hydration step: the dry ingredients are mixed, dampened just enough to hold their shape in a ball, left to stand, and then brought to a working consistency that's still drier than mortar for laying brick.

The step reduces shrinkage as the mortar cures, so the new joint stays tight against the brick instead of pulling away. Our specialists pack the mortar into the joint in layers, letting each firm up before the next, and tool the final layer when it's thumbprint hard. Small batches keep every joint at the same working consistency.

Keeping your home clean during masonry work

Masonry work makes dust and debris, and most of it can be kept outside. Our pros lay tarps over the roof and the ground below the chimney, cover plants and outdoor furniture, and catch mortar as it's raked out.

When the work reaches the firebox or the chimney breast, the room gets drop cloths, the fireplace opening is sealed, and a vacuum runs as they grind. Debris is bagged and hauled away. Each evening the site is tidied and the work covered. You shouldn't find grit in the gutters or on the patio afterward. Gutters get checked for grit before the tarps come off.

Free Inspection

Every face of the chimney, checked free in Archer

Brick faces that are flaking, cracked or crumbling
Gap or cracking where the chimney meets the house wall
White and rust staining traced to its source
Steel over openings for rust and lifted brick

Claim 10% off your first service

Worn joints or flaking brick? Arrange a visit, and the first repair carries a 10% discount.

Call (352) 675-6366 Get a Free Inspection

FAQs

What people ask about chimney brick

Will the repair match my brick?

Our pros match replacement brick for size, absorption and color, and mix mortar samples to match the old joints. You'll see a sample on the wall before the work starts.

Are stair-step cracks serious?

They mean the masonry has moved. If the movement has stopped, the crack can be repointed. If it's still moving, the cause comes first, and our specialists check which you have.

Our Services