Brick and mortar repairs for chimneys in Yankeetown

Joints repointed, damaged brick replaced, mortar matched to your chimney. Free inspection for homes in Yankeetown.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Did the brick fail, or the mortar?

Every masonry repair starts with one question: which half of the wall failed? Sometimes it's the mortar, worn and recessed while the brick is fine. Sometimes it's the brick, flaking or cracked while the joints hold. Sometimes it's both.

Every face of the chimney gets checked so you'll know which you have, since the fix and the price differ a lot. Repointing alone is lighter work than replacing brick, and replacing brick without fixing the joints just moves the problem. You'll see the reasoning noted on the quote. Talk to our masonry pros about your chimney in Yankeetown at (352) 675-6366.

About 51 miles, measured point to point, lie between Yankeetown and the Gainesville reference point. Our specialists serve Yankeetown as part of Levy County.

What's Included

Your chimney masonry, put right

New mortar suited to your brick's strength and shade
Loose bricks at the top lifted off and reset
Ties added where the chimney pulls from the house
Repointing and brick work under our workmanship warranty

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Steel in coastal masonry

Steel inside chimney masonry, from lintels to ties, rusts faster when salt reaches it. In Yankeetown, rust that swells inside the wall cracks brick and lifts courses sooner than it would further from the water. Our specialists look for rust stains and cracks that point to corroding steel, and when they replace ties or lintels here, they use corrosion-resistant metal suited to a salt-exposed home.

Our Process

Mortar matched before a joint is touched

Find which half failed

Every face is looked over for worn joints, damaged brick and cracks, and the cause is found.
Match mortar and brick

Samples are mixed and cured, and replacement brick is matched and shown to you.
Joints raked, then refilled

Joints are raked to sound depth, repointed in layers, and damaged brick is swapped out.
Cover, clean, cure

The work is covered against rain, the site cleaned, and you get curing time spelled out.

Why Choose Us

Patient, family-run masonry work

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Replacement brick is matched in size, absorption and color, and you see a sample first.

100% satisfaction, guaranteedIf the repair doesn't blend in or hold, we make it right. That's our 100% satisfaction guarantee.
Your price, upfrontMasonry work in Yankeetown is priced by section up front, so you can choose what gets done.
Locally owned and operatedA locally owned business, so the masons who repointed your chimney are easy to reach later.

Call (352) 675-6366 Get a Free Inspection

New mortar that stays softer than the brick

On strength, the Brick Industry Association's repointing guidance is clear: the new mortar shouldn't be any stronger in compression than what's already in the wall. A stronger mortar concentrates stress at the brick's edges and faces.

Over time, that stress cracks and spalls the brick next to the joint, and the damage is worse than the worn mortar ever was. Our specialists match the new mortar to the old in strength as well as color, and they'll explain why the strongest mix isn't the best one for your chimney. It's a mistake our pros see on old repairs again and again, and an easy one to avoid.

Raking joints to a sound depth

Repointing only lasts if the new mortar has something solid to bond to and enough depth to hold. That means raking out the old mortar until the tool meets firm material, and cleaning the joint of dust and loose grit.

Our pros use hand tools or careful grinding, depending on the joint and the brick, and they avoid cutting into the brick edges, which widens the joint and changes the look. Joints that are only surface-scraped and topped with a thin smear of new mortar fail within a few seasons. The depth they rake to is worked out for your joints each time.

When repair becomes rebuilding

Masonry repair has a limit. When the mortar has failed through the full depth of the wall across several courses, when bricks are loose throughout the top section, or when the chimney has shifted, repointing and spot replacement only postpone a bigger job.

At that point, our specialists recommend taking the chimney down to sound masonry and relaying it, which tends to mean just above the roofline. They'll show you why, price the rebuild next to the best repair option, and let you compare. Sometimes the repair is still worth doing to buy time, and they'll say so. You make the call, with both prices in front of you.

Free Inspection

Every face of the chimney, checked free in Yankeetown

Mortar joints on every face, and how deep the wear goes
Brick faces that are flaking, cracked or crumbling
Paint or coatings on the brick and what's under them
Any bulging sections, tapped by hand to find hollow spots behind the face

Claim 10% off your first service

Worn joints or flaking brick? Arrange a visit, and the first repair carries a 10% discount.

Call (352) 675-6366 Get a Free Inspection

FAQs

What people ask about chimney brick

Who handles chimney masonry repair in Yankeetown?

Our pros do. Yankeetown is inside our Levy County coverage, and each face of the chimney gets checked for free before any repair is priced. Soft joints or flaking brick are worth mentioning on the phone.

Which parts of masonry work does the warranty cover?

The workmanship on the sections we repair, as named on your quote along with the mortar and brick used. If a joint we repointed fails, our pros return and fix it. Talk to us about the brick on your chimney in Yankeetown at (352) 675-6366.

Our Services