Waterproofing chimneys for homes in Bronson

Brick drinking in rain? Our family-run pros test it on your free inspection in Bronson before recommending a repellent.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Testing the brick before sealing it

Is the brick really the problem? Our pros can find out with a simple absorption test: a small graduated tube is sealed against the brick face, filled with water and timed. Brick that drinks the water in quickly is a candidate for a repellent; brick that barely takes any isn't.

Comparing a few spots on the chimney shows whether the whole face needs treating or just the weather side. It keeps you from paying to seal brick that's doing fine on its own. The test is part of the free inspection when waterproofing is on the table. Ask for a brick absorption check at your home in Bronson: (352) 675-6366.

The Gainesville reference point is roughly 23 miles from Bronson as the crow flies. In our service area, Bronson is grouped with Levy County.

What's Included

Masked, coated and recorded

Efflorescence brushed off before treatment
Crown membranes applied as a separate step
Cure times respected after repointing
Treated faces recorded for homes in Bronson

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Natural stone and veneer faces

A stone chimney in Bronson may need little or no repellent, since many stones absorb very little water and the joints carry most of it. Our pros test the stone and check the joints first. Veneer follows its maker's coating guidance, and the plan for your chimney is written on the quote. Some stone chimneys need nothing at all once the joints are repointed.

Our Process

Four steps to a waterproofed chimney

Close the gaps

Crown, cap, flashing and joints are repaired first, since a repellent can't seal them.
Test the brick

Absorption is measured on each face and a test patch is checked with you.
Mask and apply

Glass and trim are masked, and the repellent goes on bottom up on dry brick.
Record and recheck

You get the product, faces and date written out, and we check beading on later visits.

Why Choose Us

Cracks and joints repaired before any coat

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Waiting times and the forecast are respected, even when that means holding off a few days.

Free inspection firstA brick absorption test is part of the free inspection, so you know if waterproofing is worth it.
No hidden fees, all upfrontNo hidden fees on waterproofing in Bronson; masking, testing and cleanup are in the price.
Family owned and runWe're family owned, and we'll tell you when your chimney doesn't need a coating.

Call (352) 675-6366 Get a Free Inspection

Test areas before the whole chimney

Trying a repellent on test areas before treating a whole wall is what the Brick Industry Association recommends. On a chimney, that means a patch on a less visible face, left to cure and then checked.

Two results matter on the patch. Water should bead and roll off. The brick's color, sheen and texture should look unchanged. If either isn't right, the product or the method changes before the full coat goes on. It adds a short wait to the job, and it's the surest way to avoid a chimney that looks blotchy or doesn't shed water. The patch location is noted on the quote.

Why new brickwork waits longer

New masonry carries moisture from construction, and as it dries for the first time, white salt bloom can come out on the face. The Brick Industry Association suggests at least a month after the structure is enclosed before a repellent goes on, and ideally a full year for new brickwork.

Sealing too soon can hold that construction moisture in the wall. On a rebuilt chimney, our pros fit the cap and seal the crown right away, since those keep the worst water out, and leave the brick to dry naturally before any repellent is considered. You'll get a suggested date on your quote.

Stone, veneer and repellents

Natural stones vary widely in how much water they absorb. Many take in very little, so on a stone chimney the mortar joints carry most of the water. Treating low-absorption stone with a repellent adds cost without much benefit.

Our specialists test the stone's absorption and check the joints first, repointing where needed. Porous stones get a repellent suited to that stone. Manufactured stone veneer has its own maker's guidance on coatings and on the drainage behind it, and our pros follow that guide. You'll hear what your stone needs before any product is picked. Stone and joints are priced separately.

Free Inspection

What we check before sealing brick in Bronson

Damp signs on the chimney breast or attic side
Stone or veneer, and what its maker's guidance allows
Cure time left on any recent repointing or new brick
Whether the chimney needs a repellent at all

Claim 10% off your first service

Keep the brick dry in Bronson with a 10% discount on a first job.

Call (352) 675-6366 Get a Free Inspection

FAQs

What homeowners ask about sealing brick

Can a repellent cure a chimney that leaks?

Only if the leak is water soaking through porous brick. Leaks through a cracked crown, missing cap, flashing or open joints need those repairs, and our pros fix them first.

Do you seal the crown too?

The crown gets a separate flexible coating made for concrete, applied as its own step. The brick gets the penetrating repellent. Both are priced separately.

Our Services