Your chimney brick kept dry in Orange Heights, FL

Find out whether a repellent is appropriate for your chimney in Orange Heights, after its condition has been assessed.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Silane, siloxane and what the words mean

Shopping for chimney sealers and seeing words like silane and siloxane? Both are penetrating repellents: they soak into the brick and line its pores, so water beads on the surface while vapor can still pass out. The Brick Industry Association notes siloxanes bond well with brick.

Our pros choose a product made for chimney masonry and apply it to the maker's instructions, which set the surface condition, the weather window and how it goes on. You'll see the product name on the quote ahead of the work, so you can look it up. Check with a local pro about the right repellent for your chimney in Orange Heights at (352) 675-6366.

Orange Heights lies inland from the Gulf and Atlantic coasts. Orange Heights is roughly 13 straight-line miles from the Gainesville reference point.

What's Included

What a waterproofing visit covers in Orange Heights

Breathable repellent applied bottom up
Test patches checked before the full coat
Crown membranes applied as a separate step
Treated faces recorded for homes in Orange Heights

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Gutters that spill onto the brick

Where a gutter spills onto the chimney of a home in Orange Heights, one section of brick gets soaked every time it rains hard. A repellent can't keep up with that much water pouring over it. Our pros point out any overflow near the chimney. Fixing the gutter comes first; then the soaked section is repaired and tested before any repellent goes on.

Our Process

Gaps closed before any repellent goes on

Close the gaps

Crown, cap, flashing and joints are repaired first, since a repellent can't seal them.
Test the brick

Absorption is measured on each face and a test patch is checked with you.
Mask and apply

Glass and trim are masked, and the repellent goes on bottom up on dry brick.
Record and recheck

You get the product, faces and date written out, and we check beading on later visits.

Why Choose Us

We test the brick before sealing it

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Our specialists will say so when a chimney in Orange Heights doesn't need waterproofing.

Free inspection firstA brick absorption test is part of the free inspection, so you know if waterproofing is worth it.
No hidden fees, all upfrontNo hidden fees on waterproofing in Orange Heights; masking, testing and cleanup are in the price.
Family owned and runWe're family owned, and we'll tell you when your chimney doesn't need a coating.

Call (352) 675-6366 Get a Free Inspection

Why new brickwork waits longer

New masonry carries moisture from construction, and as it dries for the first time, white salt bloom can come out on the face. The Brick Industry Association suggests at least a month after the structure is enclosed before a repellent goes on, and ideally a full year for new brickwork.

Sealing too soon can hold that construction moisture in the wall. On a rebuilt chimney, our pros fit the cap and seal the crown right away, since those keep the worst water out, and leave the brick to dry naturally before any repellent is considered. You'll get a suggested date on your quote.

How the repellent is applied

Wet and generous is how a penetrating repellent goes on. Makers such as SaverSystems describe a low-pressure flood coat applied from the bottom of the wall upward, so the brick takes in what it can and the excess runs down onto brick that's still being treated.

Working one face at a time, our pros follow the maker's instructions for the product used and watch for runs and missed spots. They don't mist it on with a high-pressure sprayer, which wastes product and drifts onto glass and plants. The result is an even coat that the brick absorbs fully. The number of coats goes on the quote.

Some chimneys don't need waterproofing

According to the Brick Industry Association, a water repellent isn't necessary for brickwork that was properly chosen, detailed, built and maintained, under normal exposure. It also notes that the first round of repairs can solve moisture problems on its own.

Our pros take that seriously. If the crown, cap, flashing and joints are sound and the brick's absorption tests low, they'll recommend skipping the repellent and checking again in a year. You save the cost, and the chimney stays as breathable as it was built to be. If the brick tests high, you'll see the numbers that support treating it. That test result is written on your quote.

Free Inspection

Each face of the brick, tested free

Weather side and sheltered faces compared for exposure
Stone or veneer, and what its maker's guidance allows
Crown coating needs, kept separate from the brick repellent
Whether the chimney needs a repellent at all

Claim 10% off your first service

New to our family business? Arrange a visit and your first chimney waterproofing is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Does brick need sealing at all?

Is Orange Heights somewhere you waterproof chimneys?

Yes, Orange Heights is in our service area. Our pros run an absorption test on your free inspection, since the brick decides whether a repellent is worth it. Damp brick or white bloom are good things to mention up front.

Can a repellent cure a chimney that leaks?

Only if the leak is water soaking through porous brick. Leaks through a cracked crown, missing cap, flashing or open joints need those repairs, and our pros fix them first.

Our Services