Chimney waterproofing around Rochelle, FL

Our specialists protect glass and trim, apply the repellent in the right weather, and offer a free inspection in Rochelle.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Does the chimney need waterproofing at all?

Not every chimney does. The Brick Industry Association notes that well-built, well-maintained brickwork under normal exposure doesn't need a repellent, and that the first round of repairs can solve moisture problems on its own.

Crown, cap, flashing and joints come first, along with a test of the brick's absorption, before anything is recommended. If the repairs are enough, you'll hear that and save the cost of a coating. If the brick is still absorbing too much once everything is sound, a breathable repellent is worth it. Either way, the reasoning comes on a written quote. Ask our pros if waterproofing makes sense for your chimney in Rochelle at (352) 675-6366.

The Gulf and Atlantic shorelines are away from Rochelle. A straight line from the Gainesville reference point to Rochelle runs about 10 miles.

What's Included

Repairs, test patch and final coat

Brick absorption tested face by face
Glass, trim and plants masked and covered
Efflorescence brushed off before treatment
Cure times respected after repointing

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Waterproofing during a reroof

If a new roof is going on your home in Rochelle, the chimney's crown, flashing and joints should be sorted while the roofers are there. A repellent is the last step, after the flashing work is done. Our specialists coordinate the order with your roofer, so the flashing seals against sound masonry and the brick is treated once everything around it is finished.

Our Process

Repairs, a test patch, then the repellent

Close the gaps

Crown, cap, flashing and joints are repaired first, since a repellent can't seal them.
Test the brick

Absorption is measured on each face and a test patch is checked with you.
Mask and apply

Glass and trim are masked, and the repellent goes on bottom up on dry brick.
Record and recheck

You get the product, faces and date written out, and we check beading on later visits.

Why Choose Us

Breathable chimney protection in Rochelle

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Only breathable, penetrating repellents go on chimney brick, with no surface film.

Free inspection firstA brick absorption test is part of the free inspection, so you know if waterproofing is worth it.
No hidden fees, all upfrontNo hidden fees on waterproofing in Rochelle; masking, testing and cleanup are in the price.
Family owned and runWe're family owned, and we'll tell you when your chimney doesn't need a coating.

Call (352) 675-6366 Get a Free Inspection

Waiting times after masonry work

Fresh mortar and new masonry need time before a repellent is applied. The curing requirements for the repairs and the selected treatment govern the schedule. Surface moisture and weather also need checking; elapsed time alone does not establish that the wall is ready.

The mortar needs to cure, and the wall needs to dry out enough for the repellent to soak in. Our specialists plan the repellent visit after those waits and check the brick is visibly dry on the day. If the chimney has had a lot of new brick, they may suggest waiting longer still, until the wall has fully dried out.

Cleaning off bloom before treatment

White efflorescence on the brick has to come off before a repellent goes on, and the water causing it has to be stopped. Sealing over salts traps them under the surface, where they keep working on the brick.

For light efflorescence, the Brick Industry Association points to a dry brush first, then a stiff fiber brush with clean water, and says to ask the brick maker before any pressurized cleaning. Our specialists use those gentle methods, let the brick dry fully, and only then apply the repellent. Heavy staining gets a closer look first, since it points to a bigger water problem. The brick is left to dry before anything is applied.

Stucco chimneys are a different surface

A chimney finished in stucco, a cement plaster over masonry or lath, doesn't take a brick repellent the same way. Stucco has its own coatings, from breathable masonry finishes to elastomeric ones, and each behaves differently with water and vapor.

Cracks and gaps at trim and flashing can let in more water than the surface does, so the stucco's condition comes first. Repairs come before any coating, and the finish is chosen with the stucco maker's guidance. You'll hear the options, and their tradeoffs, before anything is priced. Stucco with cracks at the flashing or trim gets those gaps sealed first, since they let in far more water than the stucco surface does.

Free Inspection

A free absorption test in Rochelle

Crown, cap and flashing checked for gaps a repellent can't fix
Whether the mortar joints on each face need repointing first
Weather side and sheltered faces compared for exposure
Product choice, number of coats and the maker's weather window

Claim 10% off your first service

Breathable protection for chimney brick in Rochelle, and 10% off when you book today.

Call (352) 675-6366 Get a Free Inspection

FAQs

Repellents and sealers, answered

Why not use a clear sealer from the store?

Many are film-forming sealers that slow the brick's drying and trap water and salts. Our specialists use breathable, penetrating repellents made for chimney masonry instead.

How do you know the brick needs it?

Our pros test absorption with a small water tube on each face. Brick that takes in water quickly is a candidate; brick that barely absorbs doesn't need treating.

Our Services