Sealing brick chimneys the right way in Trenton

Cracks sealed, joints repointed, then the repellent. Local chimney waterproofing in Trenton after the free look.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Testing the brick before sealing it

Is the brick really the problem? Our pros can find out with a simple absorption test: a small graduated tube is sealed against the brick face, filled with water and timed. Brick that drinks the water in quickly is a candidate for a repellent; brick that barely takes any isn't.

Comparing a few spots on the chimney shows whether the whole face needs treating or just the weather side. It keeps you from paying to seal brick that's doing fine on its own. The test is part of the free inspection when waterproofing is on the table. Ask for a brick absorption check at your home in Trenton: (352) 675-6366.

Our Trenton coverage is inland from the Gulf and Atlantic coasts. From the Gainesville reference point, Trenton is about 28 miles away in a direct line.

What's Included

Before and after the repellent goes on

Entry points repaired before any repellent
Brick absorption tested face by face
Old film sealers identified before choosing a product
Treated faces recorded for homes in Trenton

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Old sealers on inland chimneys

An old clear sealer on a chimney in Trenton may be a film type that's trapping moisture. A penetrating repellent won't bond through it. Our pros check for old coatings before choosing a product, and they'll explain the options if a film is already on the brick, from letting it weather off to careful removal. Nothing new goes on until the old coating question is settled.

Our Process

Coating your chimney in Trenton

Close the gaps

Crown, cap, flashing and joints are repaired first, since a repellent can't seal them.
Test the brick

Absorption is measured on each face and a test patch is checked with you.
Mask and apply

Glass and trim are masked, and the repellent goes on bottom up on dry brick.
Record and recheck

You get the product, faces and date written out, and we check beading on later visits.

Why Choose Us

Waterproofing from a local family business

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Local, family-run pros who check the beading on every later visit to Trenton.

Free inspection firstA brick absorption test is part of the free inspection, so you know if waterproofing is worth it.
No hidden fees, all upfrontNo hidden fees on waterproofing in Trenton; masking, testing and cleanup are in the price.
Family owned and runWe're family owned, and we'll tell you when your chimney doesn't need a coating.

Call (352) 675-6366 Get a Free Inspection

What film-forming sealers do to brick

Some sealers sit on the surface as a film, such as acrylics, waxes, stearates and urethanes. The Brick Industry Association notes they can bridge hairline cracks but slow evaporation from the wall, and salts can collect under low-permeability coatings.

The question is how a particular coating will behave on this chimney. Ask about its vapor properties, the condition of the wall and any coating already present before agreeing to treatment. A glossy or matt appearance alone cannot answer those questions.

Dry brick and a dry forecast

The selected repellent's data sheet sets its application conditions. Air and masonry temperature, surface moisture, curing time and the rain forecast all matter. A waiting period from a different product should not be substituted for those instructions.

Surface moisture requirements vary by product. Our pros check the selected instructions rather than assuming every repellent needs the same dry surface or rain-free interval. If the wall or forecast does not meet those requirements, application is rescheduled and the revised timing is explained.

Why more isn't better

It's tempting to think a heavier coat protects better. The Brick Industry Association notes that over-application can reduce a masonry wall's ability to breathe, which defeats the reason for choosing a penetrating repellent.

Our specialists apply the amount the maker calls for, in the number of coats the data sheet gives, and no more. Extra product can also leave a darkened or glossy look on some brick. If the test patch shows the brick needs a second coat, they'll say so and apply it the way the maker describes. The amount used goes on your quote. That keeps the brick breathing the way it should.

Free Inspection

Tested first, priced second

Whether the mortar joints on each face need repointing first
Absorption of the brick, tested with a tube on each face
Cure time left on any recent repointing or new brick
A test patch location on a less visible face

Claim 10% off your first service

Breathable protection for chimney brick in Trenton, and 10% off when you book today.

Call (352) 675-6366 Get a Free Inspection

FAQs

Things to ask before sealing brick in Trenton

Will it change how my brick looks?

A penetrating repellent is meant to leave the brick looking much the same, with water beading on it. Our specialists check a test patch with you before treating the whole chimney.

How soon after repointing can you waterproof?

At least 72 hours after repointing, per the Brick Industry Association and the repellent maker, and longer for new masonry. Our pros write the date on your quote.

Our Services