Your new fireplace, installed right in Arredondo

Tired old fireplace? Get a free inspection in Arredondo and a new unit installed to its listing.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

An electric fireplace on the wall

No chimney, no vent, no gas line? An electric fireplace plugs in or wires in, and it can hang on a wall, sit recessed in it, or slide into an old firebox.

Our pros mount it to the maker's instructions, check the outlet or circuit it needs, and finish it neatly with you. Where a new circuit is called for, an electrician handles it, and your quote says so. It's the simplest fireplace to add, and it works in rooms where venting isn't possible. Recessed units need a framed opening sized to the manual. Reserve an electric fireplace install in Arredondo at (352) 675-6366.

Arredondo is an inland service location, separate from the sea coast. Arredondo is about 6 miles from the Gainesville reference point, measured in a straight line.

What's Included

Installs we take on in Arredondo

Electric fireplaces mounted, recessed or inserted
Insulation shields fitted where the chimney meets insulation
Outside air supplies planned with the fireplace
Installs in Arredondo under our workmanship warranty

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Metal roofs and new chimneys

Running a new chimney through a metal roof in Arredondo takes the maker's roof parts and a roofer who knows how to seal metal panels around them. Our pros coordinate with your roofer on the opening and the parts, and the quote splits the work between us and them.

Our Process

The order our pros follow on installs in Arredondo

Look at the room

The wall, floor, attic and roof are looked at, then the fireplace options that fit are laid out.
Plan and price

You choose a unit, and the quote lists every part, trade, permit and inspection.
Install and check

The unit and its chimney or vent go in to the manual, with clearances checked before walls close.
Test and hand over

The unit is tested, you're shown how to use it, and you get the break-in steps noted on the quote.

Why Choose Us

Installers who start with your room

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Clearances in Arredondo are checked before the walls close, where they matter most.

Your written price is freeEach fireplace option for your room is given its own price, free and side by side.
Family owned and runFamily-run planning for your fireplace in Arredondo, as careful as if it were going in our own home.
100% satisfaction, guaranteedThe install isn't done until you're happy with it. That's our 100% satisfaction guarantee.

Call (352) 675-6366 Get a Free Inspection

Doors that match the listing

Doors change how a fireplace breathes and how hot its parts run. On a factory-built fireplace, the Florida Building Code allows gasketed doors only when the unit is listed for them.

Our specialists choose the doors when they choose the fireplace, so they're the ones the maker lists for that model. On a masonry fireplace, doors are sized to the opening and fitted to seal against it.

Getting it right at installation avoids the smoke and overheating that come from mismatched doors fitted later. Doors are priced alongside the unit, with the listing noted where it applies. The right doors also make the fireplace easier to keep clean.

Planning an electric fireplace

Electric units need no chimney or vent, which is why they fit rooms where other fireplaces can't go. What it does need is the right power: some plug into a standard outlet, while larger or built-in units call for a dedicated circuit.

The unit's manual sets the electrical needs and the clearances around it. An electrician handles any new circuit to the electrical code, and your quote names that part of the job.

Our pros mount or recess the unit to the manual, check the outlet or connection, and finish it neatly. It's the quickest fireplace to add to a room.

Where the chimney leaves the roof

A factory-built chimney passes through the roof with parts from its maker: a roof support where needed, a sealed storm collar and the listed termination cap on top. Its height above the roof follows the maker's rules for distance from nearby roof surfaces.

The roofing around the new opening has to be weathered in so it doesn't leak, and on many roofs that's a roofer's job, working with the maker's roof parts.

With the opening cut and the listed parts fitted, our pros coordinate with your roofer so the roofing is sealed properly around the new chimney. The quote shows who handles each part.

Free Inspection

Your room, looked at for free in Arredondo

Floor framing or slab under the unit and hearth
Gas line or new circuit needs, and who will do them
Finish work around the unit and which trade handles it
Each fireplace option that fits, priced side by side

Claim 10% off your first service

Wood, gas or electric, a first-time booking takes 10% off the install.

Call (352) 675-6366 Get a Free Inspection

FAQs

Choosing a fuel? Ask us

Can I put a TV above the fireplace?

That's up to the unit. Each maker's clearance chart sets what can go above, and some units are made for a TV wall. Our specialists check before the wall is framed.

Can you replace my old factory-built fireplace?

We can. The old rating plate shows what you have, the maker's current line shows what's offered, and our pros plan a replacement that's listed with its chimney. Talk to us about your replacement in Arredondo at (352) 675-6366.

Our Services