Installing fireplaces for homes in Brooker

Metal or masonry, gas or electric, our family-run specialists install fireplaces in Brooker after a free planning look.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Glass doors on the new fireplace

Want glass doors on the new fireplace? On a factory-built unit, only doors listed for that model can be fitted. On a masonry fireplace, doors are made to fit the opening.

Our specialists choose the doors with the fireplace, so they match the listing and the opening from day one. Doors change how a fireplace draws, and fitting the wrong ones later can cause smoke or overheating. The doors are priced with the unit. Choosing both together saves a second trip later. Call our pros about doors for your new fireplace in Brooker: (352) 675-6366.

About 14 miles, measured point to point, lie between Brooker and the Gainesville reference point. Our specialists serve Brooker as part of Bradford County.

What's Included

Unit, vent, hearth and surround

Brick fireplaces built on their own footing
Insulation shields fitted where the chimney meets insulation
Trades coordinated for gas lines, circuits and roofing
Break-in steps given for units installed in Brooker

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Storm wind and a new termination

Wind-driven rain from a storm passing over Brooker can push against a vent termination or chimney cap. The maker's listed parts are designed for that when installed to the manual. Our specialists fit the termination and cap exactly as the maker describes, with the storm collar sealed and the roofing weathered in by your roofer. Everything is checked before the roof is closed up.

Our Process

Four stages of a new fireplace

Look at the room

The wall, floor, attic and roof are looked at, then the fireplace options that fit are laid out.
Plan and price

You choose a unit, and the quote lists every part, trade, permit and inspection.
Install and check

The unit and its chimney or vent go in to the manual, with clearances checked before walls close.
Test and hand over

The unit is tested, you're shown how to use it, and you get the break-in steps noted on the quote.

Why Choose Us

Planning comes before any sale

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Floors and furniture are covered, and the room is cleaned before our pros leave.

Your written price is freeEach fireplace option for your room is given its own price, free and side by side.
Family owned and runFamily-run planning for your fireplace in Brooker, as careful as if it were going in our own home.
100% satisfaction, guaranteedThe install isn't done until you're happy with it. That's our 100% satisfaction guarantee.

Call (352) 675-6366 Get a Free Inspection

Metal system or brick built on site

One path is a factory-built fireplace: a metal firebox and chimney that were tested and listed together. It's lighter, quicker to install and fits more rooms, including upstairs ones. The other path is a masonry fireplace, laid up in brick or stone on its own footing, which is heavier, slower and more costly.

Both can burn wood, and both have rules: the factory-built unit follows its listing and manual, and the masonry fireplace follows the building code's fireplace chapter.

Our specialists explain what each would mean for your house, from the floor to the roof, and price both where both fit.

Planning combustion air

A wood fireplace needs air to burn. Outside combustion air is what the Florida Building Code asks for, except in rooms kept at neutral or positive pressure by mechanical ventilation.

Where outside air is used, the code controls where the intake may draw from: outdoors, or a ventilated crawl space or attic, and not a garage or basement. It also wants listed ducts where the unit calls for them, and a corrosion-resistant screen over the intake.

Planning the air supply with the fireplace is simpler than adding it after the walls are finished, and it's priced on its own line.

Planning a gas fireplace

Three things get planned together for a gas fireplace: where it sits, how it vents and where the gas comes from. Direct-vent units draw air from outside and send exhaust out through a sealed pipe, through the wall or the roof, as the maker's vent tables allow.

The gas line to the unit is a gas contractor's work, sized and run to the gas code, and our quote names who does it.

The unit, the venting and the framing follow the maker's installation manual, and our pros coordinate the timing with the gas contractor so the line is ready when the unit goes in.

Free Inspection

Wall, floor, attic and roof, checked free

Hearth extension size and material for the unit chosen
Clearances to framing, trim and mantel from the manual or code
Gas line or new circuit needs, and who will do them
Roof type and where the chimney would leave it

Claim 10% off your first service

Wood, gas or electric, a first-time booking takes 10% off the install.

Call (352) 675-6366 Get a Free Inspection

FAQs

Your fireplace installation questions, answered

Can you replace my old factory-built fireplace?

We can. The old rating plate shows what you have, the maker's current line shows what's offered, and our pros plan a replacement that's listed with its chimney. Talk to us about your replacement in Brooker at (352) 675-6366.

Can you build a brick fireplace?

Yes, on a floor that can take it. A masonry fireplace needs its own footing, a firebox built to code dimensions and a lined chimney, and our specialists plan it in stages with prices for each.

Our Services