Fireplace installation around Hampton, FL

Installed to the maker's instructions and the building code, with a free look first and a firm price for your home in Hampton.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

The room decides the fireplace

Which fireplace suits your room? Start with three questions. Is the wall an outside wall, where a gas unit can vent straight out? What's under the floor, since a masonry fireplace needs a footing and a factory-built unit needs solid support? And what's above, since a chimney has to rise through the ceiling and roof?

Our pros answer those on the visit, looking at the attic and the outside wall as well as the room, then tell you which kinds of fireplace will work and which won't. Ask for a planning visit for your room in Hampton: (352) 675-6366.

Neither the Gulf nor Atlantic coast reaches Hampton. Measured directly, about 18 miles separate Hampton from the Gainesville reference point.

What's Included

New fireplaces for homes in Hampton

Chimney routes planned through attics and roofs
Listed doors fitted to factory-built units
Trades coordinated for gas lines, circuits and roofing
Installs in Hampton under our workmanship warranty

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Trees near a new chimney

If trees stand close to where a new chimney would leave the roof of your home in Hampton, their limbs can drop leaves onto the cap and rub against it in wind. Our pros consider nearby trees when choosing where the chimney exits, and they'll suggest trimming limbs that would sit too close to the new cap. A clear cap keeps the new fireplace drawing well.

Our Process

Building your fireplace in Hampton

Look at the room

The wall, floor, attic and roof are looked at, then the fireplace options that fit are laid out.
Plan and price

You choose a unit, and the quote lists every part, trade, permit and inspection.
Install and check

The unit and its chimney or vent go in to the manual, with clearances checked before walls close.
Test and hand over

The unit is tested, you're shown how to use it, and you get the break-in steps noted on the quote.

Why Choose Us

Every kind of new fireplace, one local company

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

You get your new unit's break-in steps written out, so the first fires in Hampton go smoothly.

Your written price is freeEach fireplace option for your room is given its own price, free and side by side.
Family owned and runFamily-run planning for your fireplace in Hampton, as careful as if it were going in our own home.
100% satisfaction, guaranteedThe install isn't done until you're happy with it. That's our 100% satisfaction guarantee.

Call (352) 675-6366 Get a Free Inspection

Carrying the weight of the unit

Every fireplace adds weight to the floor, and a factory-built chimney adds load to whatever holds it up. The Florida Building Code wants the members that carry a factory-built chimney designed for that extra load.

Floor framing under the unit and hearth, and the ceiling and roof framing that the chimney's supports bear on, all get checked. On a slab, the floor is rarely a concern; on a framed floor or an upstairs room, it gets a closer look.

If reinforcement is needed, the quote names it and the trade that does it, and the work is scheduled before the fireplace goes in.

Break-in fires and first smells

New fireplaces give off a smell the first few times they're used, as paints, sealers and binders in the unit cure. Makers warn about it in their manuals and advise opening windows and running a fan until it passes.

Some gas unit makers suggest one long first burn to get through it in a single go. Our pros give you the maker's break-in steps for your unit spelled out.

The smell should fade after the first few uses. If it doesn't, or if it smells like anything other than hot paint, call and they'll look into it right away. A little patience here pays off.

Checks before the walls are closed

Once the finish goes on, the most important parts of a fireplace install are hidden: the clearances to framing, the fire stops, the insulation shield in the attic and the connections between chimney sections.

No drywall, tile or stone goes up until each of those matches the maker's manual or the code. Where something is off, it's corrected before the finish trades return.

The checks are noted on your quote. It's also when the building department's framing inspection happens, so the two line up. Getting it right at this stage is what keeps the fireplace safe for years. Nothing gets covered early.

Free Inspection

Measured before anything is quoted

Hearth extension size and material for the unit chosen
Combustion air needs and where an intake could go
Roof type and where the chimney would leave it
Permit needs and the inspections the job is likely to have

Claim 10% off your first service

Choose your fireplace, book today, and a first install with our pros is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

What to decide before an install in Hampton

Will an electric unit need its own circuit?

Some plug into a standard outlet; larger or built-in units may need a dedicated circuit. The unit's manual decides, and an electrician runs any new circuit.

Is a fireplace install covered by a warranty?

Two warranties apply: ours on the workmanship of the install, and the maker's warranty on the unit applies under its own terms. Reserve your free planning visit in Hampton at (352) 675-6366.

Our Services