Installing fireplaces for homes in Lake Butler

Metal or masonry, gas or electric, our family-run specialists install fireplaces in Lake Butler after a free planning look.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

The room decides the fireplace

Which fireplace suits your room? Start with three questions. Is the wall an outside wall, where a gas unit can vent straight out? What's under the floor, since a masonry fireplace needs a footing and a factory-built unit needs solid support? And what's above, since a chimney has to rise through the ceiling and roof?

Our pros answer those on the visit, looking at the attic and the outside wall as well as the room, then tell you which kinds of fireplace will work and which won't. Ask for a planning visit for your room in Lake Butler: (352) 675-6366.

Lake Butler is an inland service location, separate from the sea coast. Lake Butler is where you'll find Union County Courthouse.

What's Included

Installs we take on in Lake Butler

Direct-vent gas fireplaces planned with their vent route
Electric fireplaces mounted, recessed or inserted
Brick fireplaces built on their own footing
Installs in Lake Butler under our workmanship warranty

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Standard parts work inland in Lake Butler

The maker's standard caps, terminations and chase covers suit a new fireplace in Lake Butler, since salt isn't wearing them down. Water and sun are the main wear on outdoor parts. Our pros choose parts that shed water well and are easy to check, and they'll explain where a stainless upgrade is still worth it. Every outdoor part is named on the quote.

Our Process

The order our pros follow on installs in Lake Butler

Look at the room

The wall, floor, attic and roof are looked at, then the fireplace options that fit are laid out.
Plan and price

You choose a unit, and the quote lists every part, trade, permit and inspection.
Install and check

The unit and its chimney or vent go in to the manual, with clearances checked before walls close.
Test and hand over

The unit is tested, you're shown how to use it, and you get the break-in steps noted on the quote.

Why Choose Us

Installers who start with your room

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Each factory-built unit goes in to its listing, with the maker's parts from firebox to cap.

Your written price is freeEach fireplace option for your room is given its own price, free and side by side.
Family owned and runFamily-run planning for your fireplace in Lake Butler, as careful as if it were going in our own home.
100% satisfaction, guaranteedThe install isn't done until you're happy with it. That's our 100% satisfaction guarantee.

Call (352) 675-6366 Get a Free Inspection

Passing through attic insulation

Where the chimney passes near insulation, the system's required air space and shielding must be preserved. Shield type, support and height are checked against the applicable instructions and requirements. Loose insulation must not be packed into a space intended to remain clear.

The shield keeps a clear space around the pipe and stops insulation from falling against it. Our specialists fit the maker's shield, measure the insulation depth first and set the shield to clear it.

If insulation is added later, the shield still has to clear the new depth, and they'll mention that to you when the job is done.

Doors that match the listing

Doors change how a fireplace breathes and how hot its parts run. On a factory-built fireplace, the Florida Building Code allows gasketed doors only when the unit is listed for them.

Our specialists choose the doors when they choose the fireplace, so they're the ones the maker lists for that model. On a masonry fireplace, doors are sized to the opening and fitted to seal against it.

Getting it right at installation avoids the smoke and overheating that come from mismatched doors fitted later. Doors are priced alongside the unit, with the listing noted where it applies. The right doors also make the fireplace easier to keep clean.

Swapping out an old factory-built unit

Swapping a factory-built fireplace isn't as simple as sliding a new box into the old hole. The old chimney was listed with the old unit, and a new unit from another maker, or even a newer model, needs the chimney listed with it.

Some makers offer a matching replacement that works with the existing chimney; if yours doesn't, a new chimney is planned with the new unit.

The old unit and chimney come out, the opening is checked and adjusted to the new unit's framing dimensions, and the new system goes in to its manual. Each stage is priced.

Free Inspection

Your room, looked at for free in Lake Butler

Hearth extension size and material for the unit chosen
Clearances to framing, trim and mantel from the manual or code
Finish work around the unit and which trade handles it
Each fireplace option that fits, priced side by side

Claim 10% off your first service

Add a fireplace in Lake Butler, and a first install is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Choosing a fuel? Ask us

Will an electric unit need its own circuit?

Some plug into a standard outlet; larger or built-in units may need a dedicated circuit. The unit's manual decides, and an electrician runs any new circuit.

Can you replace my old factory-built fireplace?

We can. The old rating plate shows what you have, the maker's current line shows what's offered, and our pros plan a replacement that's listed with its chimney. Talk to us about your replacement in Lake Butler at (352) 675-6366.

Our Services