Want a new fireplace in Williston Highlands? Ask our pros

Gas lines by a gas contractor, new circuits by an electrician, and our pros coordinating it all in Williston Highlands. Free visit first.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Replacing a worn-out factory-built unit

The metal fireplace in your home rusting, cracking or missing parts the maker no longer makes? Factory-built fireplaces are listed with their own chimney systems, and a new unit needs the chimney that's listed with it, and the old one may not qualify.

The old rating plate, the chimney and the chase tell our specialists what's there, and the replacement is planned to be listed together from the firebox to the cap. The old unit comes out, the new one goes in to the maker's instructions, and the finish around it is sorted with you. Reserve a replacement planning visit in Williston Highlands by dialing (352) 675-6366.

The 2020 Census put the population of Williston Highlands at 2,591. Williston Highlands lies inland from the Gulf and Atlantic coasts.

What's Included

Installs we take on in Williston Highlands

Direct-vent gas fireplaces planned with their vent route
Insulation shields fitted where the chimney meets insulation
Hearth extensions sized to the unit's listing
Old factory-built units replaced with matched systems

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Standard parts work inland in Williston Highlands

The maker's standard caps, terminations and chase covers suit a new fireplace in Williston Highlands, since salt isn't wearing them down. Water and sun are the main wear on outdoor parts. Our pros choose parts that shed water well and are easy to check, and they'll explain where a stainless upgrade is still worth it. Every outdoor part is named on the quote.

Our Process

The order our pros follow on installs in Williston Highlands

Look at the room

The wall, floor, attic and roof are looked at, then the fireplace options that fit are laid out.
Plan and price

You choose a unit, and the quote lists every part, trade, permit and inspection.
Install and check

The unit and its chimney or vent go in to the manual, with clearances checked before walls close.
Test and hand over

The unit is tested, you're shown how to use it, and you get the break-in steps noted on the quote.

Why Choose Us

Installers who start with your room

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Floors and furniture are covered, and the room is cleaned before our pros leave.

Your written price is freeEach fireplace option for your room is given its own price, free and side by side.
Family owned and runFamily-run planning for your fireplace in Williston Highlands, as careful as if it were going in our own home.
100% satisfaction, guaranteedThe install isn't done until you're happy with it. That's our 100% satisfaction guarantee.

Call (352) 675-6366 Get a Free Inspection

Three questions about your room

Before any model is chosen, our pros look at three things. The wall: an outside wall lets a gas unit vent straight out, while an inside wall means a chimney through the attic. The floor: it has to carry the unit, its hearth and, for masonry, a footing.

What's above: any wood-burner has to send its smoke up through the ceiling and the roof, clear of framing and at the height its maker or the code calls for.

Those answers narrow the options quickly. You'll hear which kinds of fireplace fit your room, which don't, and why, before anything is priced or ordered.

Passing through attic insulation

Where the chimney passes near insulation, the system's required air space and shielding must be preserved. Shield type, support and height are checked against the applicable instructions and requirements. Loose insulation must not be packed into a space intended to remain clear.

The shield keeps a clear space around the pipe and stops insulation from falling against it. Our specialists fit the maker's shield, measure the insulation depth first and set the shield to clear it.

If insulation is added later, the shield still has to clear the new depth, and they'll mention that to you when the job is done.

How thick the firebox walls are

The walls of a masonry firebox keep the fire's heat away from the house. The code's figures: 8 inches of solid masonry in total when a firebrick lining of 2 inches or more is part of it, and 10 inches of solid masonry when there's no lining.

Our specialists build fireboxes with a firebrick lining laid in refractory mortar and solid masonry behind it, to the full thickness.

It's more material than you see from the room, and it's what keeps the framing around the fireplace cool through years of fires. The build is priced in stages, so you can see where the money goes.

Free Inspection

Your room, looked at for free in Williston Highlands

Outside wall options for a gas unit that vents straight out
Clearances to framing, trim and mantel from the manual or code
Gas line or new circuit needs, and who will do them
Permit needs and the inspections the job is likely to have

Claim 10% off your first service

Add a fireplace in Williston Highlands, and a first install is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Choosing a fuel? Ask us

Will an electric unit need its own circuit?

Some plug into a standard outlet; larger or built-in units may need a dedicated circuit. The unit's manual decides, and an electrician runs any new circuit.

Why does a new fireplace smell at first?

Paints and materials in the unit cure during the first few fires. Makers advise opening windows and running a fan until it passes, and our pros give you the break-in steps spelled out.

Our Services