
Fixing fireplaces for homes in Bell
Tell us what changed at your fireplace in Bell; the free inspection comes before a written repair estimate.
- Family owned and run
- Free inspection first
- 100% satisfaction, guaranteed
- Locally owned and operated
Request a Free Inspection
Got it, thank you
Thanks for reaching out. We'll be in touch soon to book your free inspection.
Prefer the phone? Call (352) 675-6366
When a fireplace repair needs a second look
Worried a repair won't hold through a season of fires? Every fireplace repair our pros make comes with our workmanship warranty, and the job isn't finished until you're happy with how the fireplace works.
On your quote you'll find the materials used, from the refractory mortar to the maker's parts on a factory-built unit, so there's no question later about what was done. If the repair isn't right, our pros return to look at it again. Our 100% satisfaction guarantee covers each repair we make to your fireplace. The maker's parts are named on the quote too. For a fireplace repair in Bell with our workmanship warranty behind it, call (352) 675-6366.
About 31 miles, measured point to point, lie between Bell and the Gainesville reference point. Our specialists serve Bell as part of Gilchrist County.
What's Included
Masonry or factory-built, both covered
- Open firebox joints repacked with refractory mortar
- Smoke chambers smoothed with refractory parging
- Grates matched to the firebox size
- Warranty on firebox, damper and hearth work in Bell
Local Conditions
Water that reaches the firebox
Even far from the coast, rain can find its way down to a fireplace in Bell through the chimney top. Rust on the damper and wet ash in the firebox are the signs. Our pros repair the fireplace side and tell you where the water is getting in higher up, with that repair priced too, so the damage doesn't return.
Our Process
Inside a fireplace repair visit
-
Identify the fireplace
First we find out if it's masonry or factory-built and read any rating plate.
-
Find the cause
Firebox, damper, hearth and smoke chamber are checked, and smoke problems are tested.
-
Materials matched to the fireplace
Refractory brick and mortar for masonry, the maker's listed parts for factory-built units.
-
Clean up and explain curing
The room is cleaned, and you get the waiting time before the first small fire.
Why Choose Us
Old fireplaces and new ones, family run
- Locally owned and run
- A family-run company
- 100% satisfaction guarantee
- Your inspection is free
- Same-day visits available
- Arrange a visit, take 10% off
Smoke entering your room calls for assessment before further fireplace use in Bell.
- 100% satisfaction, guaranteedIf the fireplace still smokes or the repair doesn't hold, we come back. 100% satisfaction guaranteed.
- No hidden fees, all upfrontParts and materials are on the written price, with no hidden fees for fireplace repair in Bell.
- Same-day service is availableA stuck damper, or a fireplace needed before guests arrive, can get a same-day visit when there's room.
Smoothing the smoke chamber
The smoke chamber's surface and shape both matter. A suitable refractory finish cannot compensate for every damaged or incorrectly formed chamber. The assessment considers the existing masonry and transition into the flue before parging or rebuilding is proposed.
Rough, stepped or crumbling walls slow the smoke and turn it back toward the room, and every ledge collects deposit.
Parging may be suitable where the chamber can support that repair and the selected refractory product is approved for the use. Wider damage or an unsuitable shape can require another approach. The proposed work should explain what it addresses without promising that a coating will resolve every smoke problem.
Outside air for a tight house
A fire needs air, and a tight house with exhaust fans running can starve it and pull smoke into the room. Outside combustion air is what the Florida Building Code asks for, except in rooms kept at neutral or positive pressure by mechanical ventilation.
If an outside-air intake is part of the fireplace, its location, screen and duct need to suit the applicable assembly. A damaged or blocked intake should be assessed against those requirements before replacement.
A test fire with fans running and doors closed shows whether the house is the cause, and if it is, you'll hear the options, from an outside air kit to cracking a nearby window when the fire is lit.
How close a mantel can be
Combustible trim and mantels must remain outside the clearance limits for the fireplace. The inspection considers the actual opening and surround before a change to decorative material is recommended.
Projection matters as well as distance: a deeper mantel can need a different position. The proposed surround should be checked against the applicable requirements before materials are ordered or fastened in place.
Existing trim gets measured against that rule, and plans for a new mantel are checked before it goes up. Where trim sits too close, our specialists explain the options, from raising it to replacing the nearest part with noncombustible facing, and price each one.
Free Inspection
Inside the fireplace, checked free in Bell
- Smoke chamber walls above the damper, checked with a light
- Hearth cracks, settling and the support beneath it
- Hearth extension size measured against the building code
- Rating plate and model on a factory-built fireplace
Claim 10% off your first service
Firebrick, damper or doors, claim 10% off your first repair by booking.
FAQs
Ask our pros about fireplace repair
Why do you need to know if it's factory-built?
Masonry fireplaces are repaired with refractory brick and mortar; factory-built units need the maker's listed parts. Our specialists read the rating plate to find the right ones.
How long before I can use it after a firebox repair?
Refractory repairs need time to cure, and the first fires should be small. Our pros give you the waiting time spelled out. Talk to us about your repair in Bell at (352) 675-6366.
Our Services
Other services for homes in Bell
-
Fireplace Installation Factory-built or masonry fireplaces installed with the right clearances.
-
Chimney Crown Repair Cracked concrete on the chimney top sealed, patched or poured again.
-
Gas Fireplace Installation Sealed direct-vent or room-air B-vent units, each set up by its manual.
-
Chimney Chase Cover Replacement A new metal top for a sided chimney that sheds rain again.
-
Chimney Cap Installation and Replacement A cap measured to your flue to stop rain, animals and sparks.
-
Chimney Masonry Repair Brick and mortar on the chimney repaired with a matched mix.
Get in Touch
Set up your free inspection
Send a few details and we'll call you back to set up a visit.
- Free inspection first
- 100% satisfaction, guaranteed
- No hidden fees, all upfront
Got it, thank you
Thanks for reaching out. We'll be in touch soon to book your free inspection.
Save 10% on a first fireplace repair
Masonry or factory-built, our local family business repairs fireplaces in Bell.
Get a Free InspectionCall the Gainesville chimney experts
(352) 675-6366Inspection at no charge, price in writing before any work