Fireplace repair around Rochelle, FL

Masonry or factory-built, our specialists repair the fireplace you actually use. Free inspection for homes in Rochelle.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Getting an old fireplace working again

Moved into a home with a fireplace nobody has used in years? It deserves a careful look before the first fire in years. The damper may be rusted shut, firebrick may be loose, and the flue above may hold debris or nests.

From the hearth up through the smoke chamber and the flue, everything gets checked, and you get a list of what it needs to be safe to use, each item priced. Sometimes it's a sweep and a damper repair; sometimes more. Either way, you'll know before you light it. Ask about bringing your fireplace back into use in Rochelle: (352) 675-6366.

Rochelle falls in the Alachua County part of our service area. Neither the Gulf nor Atlantic coast reaches Rochelle.

What's Included

Firebox, damper and hearth work in Rochelle

Stuck dampers freed or replaced
Short hearths extended to the building code
Stained facing cleaned once the cause is fixed
Fireboxes relined for homes in Rochelle

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Heat and use wear fireboxes in Rochelle

Its own fires are what wear down a fireplace in Rochelle. Every fire heats and cools the firebrick and mortar, and over the years the joints open and the bricks crack. Our pros look at the firebox with that wear in mind, fixing open joints and cracked brick early, before a patch job turns into a full relining.

Our Process

Fixing your fireplace in Rochelle

Identify the fireplace

First we find out if it's masonry or factory-built and read any rating plate.
Find the cause

Firebox, damper, hearth and smoke chamber are checked, and smoke problems are tested.
Materials matched to the fireplace

Refractory brick and mortar for masonry, the maker's listed parts for factory-built units.
Clean up and explain curing

The room is cleaned, and you get the waiting time before the first small fire.

Why Choose Us

Matched materials, maker's parts

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Clearances around the opening are measured, so new mantels and trim stay safe.

100% satisfaction, guaranteedIf the fireplace still smokes or the repair doesn't hold, we come back. 100% satisfaction guaranteed.
No hidden fees, all upfrontParts and materials are on the written price, with no hidden fees for fireplace repair in Rochelle.
Same-day service is availableA stuck damper, or a fireplace needed before guests arrive, can get a same-day visit when there's room.

Call (352) 675-6366 Get a Free Inspection

Replacing cracked firebrick

Fine surface cracks in firebrick are normal and can be cosmetic. Cracks that run through the brick, corners that have broken off and faces that have crumbled are different, since they leave thin spots where heat gets through to the masonry behind.

Damaged firebrick comes out without disturbing the bricks around it, and new firebrick of the same size goes in with refractory mortar. New firebrick starts out lighter in color and darkens with use.

Our pros show you which bricks need replacing and why, and the count goes on your quote. Sound brick with only surface marks stays where it is.

Smoothing the smoke chamber

The smoke chamber's surface and shape both matter. A suitable refractory finish cannot compensate for every damaged or incorrectly formed chamber. The assessment considers the existing masonry and transition into the flue before parging or rebuilding is proposed.

Rough, stepped or crumbling walls slow the smoke and turn it back toward the room, and every ledge collects deposit.

Parging may be suitable where the chamber can support that repair and the selected refractory product is approved for the use. Wider damage or an unsuitable shape can require another approach. The proposed work should explain what it addresses without promising that a coating will resolve every smoke problem.

Letting refractory repairs cure

Refractory mortar and firebox repairs need time before they face fire. Heating fresh work too soon can crack the new joints and pop pieces loose from the lining.

The wait depends on the maker's instructions for the materials used, and you'll know it before the work is done. After that, the first fires should be small and short, letting the new work dry out gradually before the fireplace sees a full load of wood.

It's a short wait for a repair that will then last through many seasons. The timing is on your quote so you can plan around it. Small first fires cost nothing.

Free Inspection

Smoke tested and priced

Firebrick and mortar joints across the back, sides and floor
Condition of the lintel and its bearing above the opening
Draft through the fireplace with exhaust fans on and off
Log set damper clamp where a gas log set is fitted

Claim 10% off your first service

Your first fireplace repair with our family business is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Fireplace repair questions we hear in Rochelle

Can you stop smoke coming out of the opening?

The damper may not open fully, the smoke chamber may be rough, the opening may be too big for the flue, or the house may be pulling air in. Our pros test each and tell you which it is.

How long before I can use it after a firebox repair?

Refractory repairs need time to cure, and the first fires should be small. Our pros give you the waiting time spelled out. Talk to us about your repair in Rochelle at (352) 675-6366.

Our Services