New gas fireplaces fitted in Cedar Key, FL

Want a fire that starts with a switch? Local pros plan the vent, unit and finish in Cedar Key, starting with a free visit.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

The safety screen and the glass

Hot glass matters when planning a fireplace for a room used by children or pets. The chosen model's required barrier and clearances belong in the plan from the start. A screen reduces access to the glass, but the surrounding area still needs careful use during operation and cool-down.

It goes on during the installation, and you'll see why it matters. Our pros also check the glass is seated and sealed, since the glass front is part of the unit's combustion system. It's part of every startup. Makers of older units may offer a barrier kit too. Reserve an install that includes the safety check in Cedar Key at (352) 675-6366.

A straight line from the Gainesville reference point to Cedar Key runs about 55 miles. Cedar Key is on our Levy County list of places we serve.

What's Included

Vent route, unit, finish and startup

Roof-vented units with the maker's roof parts
Floors under units prepared as the manual says
Propane units set up or converted with the maker's kit
Gas inserts fitted with full-height liners

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Planning service near the coast

Salty air can start corrosion at the termination and the control connections, so a gas fireplace in Cedar Key earns a yearly check of both. Our pros plan the install so both are easy to reach, and they'll suggest a service schedule based on the maker's manual. The termination and the control compartment are both placed where they can be reached for that yearly visit.

Our Process

Your gas fireplace, from plan to first flame

Trace the vent routes

Walls, attic and roof are measured against the vent tables and termination clearances.
Choose and plan

You pick a unit, and the plan covers framing, gas, power and every trade involved.
Install to the manual

The unit is set, the vent assembled and pitched, and the gas contractor connects the line.
First flame and a walkthrough

Leak test, pressures, logs and barrier are checked, and you're shown how to use it.

Why Choose Us

Gas fireplaces installed to the manual in Cedar Key

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

You get the startup readings spelled out, so you know the unit left running as its maker intended.

Your written price is freeEach unit that fits, with its vent route, is given its own price for free, side by side.
Locally owned and operatedYour installer is locally owned and can service the gas fireplace in Cedar Key later on.
No hidden fees, all upfrontNo hidden fees: vent parts, framing checks and startup are all on the written price.

Call (352) 675-6366 Get a Free Inspection

Units that use room air

Some gas fireplaces aren't sealed: they draw combustion air from the room and vent through a draft hood into a B-vent pipe or a lined chimney. The fuel gas code treats them differently, especially in bedrooms and small rooms.

They need enough room air to burn properly, and a house that pulls air in through its vents can upset their draft, which is why many carry a spill switch near the draft hood.

You'll hear the difference before you choose, and our pros may steer you toward a direct-vent model, which doesn't depend on room air. The difference is explained on the quote.

Height above the ground and walkways

A wall termination can't sit too close to the ground, where plants or debris could block it, or above a walkway where people pass through the exhaust. The manual's clearance table sets minimum heights above grade and above paved walks and driveways.

Ground level and any paths near the proposed spot get measured, and you'll hear about plants that would grow into the clearance zone.

Where a termination sits low enough to be touched, some makers call for a guard, and the manual decides. The final height is on the plan. Plants that would grow into the zone are noted too.

The floor beneath a gas unit

Manuals say what can go under the unit. A unit set on carpet, tile or other combustible flooring may need a metal or wood panel beneath it running its full width and depth, while wood flooring may be allowed directly.

The floor also has to carry the unit's weight and hold it level so the logs and burner sit right.

Before the vent is connected, our pros check the floor, fit what the manual calls for and level the unit. On a raised platform or in a wall, the base is framed to the manual's dimensions. The panel's material is named on the quote.

Free Inspection

Your free gas planning visit

Attic and roof route for a vent that goes up instead
Mantel, facing and TV plans against the clearance chart
Bedroom rules and the unit's listing, where it applies
Existing unit and vent when replacing an old fireplace

Claim 10% off your first service

Picturing a gas fireplace in Cedar Key? Arrange a visit and a first install is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Gas installs, briefly

Can you put a gas insert in my wood fireplace?

Yes, after checking the fireplace and chimney. The insert vents through full-height liners sized to it, and a gas contractor runs the line.

Is a gas fireplace install covered by a warranty?

The install gets our workmanship warranty, and the maker's warranty on the unit applies under its own terms. Reserve your free planning visit in Cedar Key at (352) 675-6366.

Our Services