Installing gas fireplaces for homes in Inglis

Our pros coordinate the gas contractor, the electrician and the roofer in Inglis, after a free planning visit.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Who runs the gas line

Gas supply is a separate part of the installation plan. A gas contractor handles a new or altered line, including its sizing and testing. Tell us whether the home already has a gas connection near the proposed fireplace so that responsibility can be discussed in the estimate.

What they do is plan the fireplace so the gas contractor knows exactly where the connection goes, coordinate the timing so the line is ready when the unit goes in, and then connect, test and start up the fireplace to the maker's manual. Your quote names each trade and its part. Reserve a planning visit that includes the gas side in Inglis by dialing (352) 675-6366.

The 2020 Census put the population of Inglis at 1,476. Inglis is near the Gulf coast without reaching the Gulf shoreline.

What's Included

Gas installs included in Inglis

Vent routes checked against the maker's tables
Terminations placed to the clearance table
Floors under units prepared as the manual says
Gas inserts fitted with full-height liners

Call (352) 675-6366 Get a Free Inspection

Local Conditions

A new gas fireplace close to the coast in Inglis

The coast is close enough to Inglis that salt can reach a vent termination. It's lighter than on the shore, but steel caps and screens can show rust over the years. Our specialists pick corrosion-resistant termination parts from the vent maker's list where they're offered, and check them on later service visits. The part numbers go on the quote.

Our Process

Gas install day in Inglis, in order

Trace the vent routes

Walls, attic and roof are measured against the vent tables and termination clearances.
Choose and plan

You pick a unit, and the plan covers framing, gas, power and every trade involved.
Install to the manual

The unit is set, the vent assembled and pitched, and the gas contractor connects the line.
First flame and a walkthrough

Leak test, pressures, logs and barrier are checked, and you're shown how to use it.

Why Choose Us

Installers who plan the vent first

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Units in Inglis are installed to their own manual, from framing to the barrier screen.

Your written price is freeEach unit that fits, with its vent route, is given its own price for free, side by side.
Locally owned and operatedYour installer is locally owned and can service the gas fireplace in Inglis later on.
No hidden fees, all upfrontNo hidden fees: vent parts, framing checks and startup are all on the written price.

Call (352) 675-6366 Get a Free Inspection

Units that use room air

Some gas fireplaces aren't sealed: they draw combustion air from the room and vent through a draft hood into a B-vent pipe or a lined chimney. The fuel gas code treats them differently, especially in bedrooms and small rooms.

They need enough room air to burn properly, and a house that pulls air in through its vents can upset their draft, which is why many carry a spill switch near the draft hood.

You'll hear the difference before you choose, and our pros may steer you toward a direct-vent model, which doesn't depend on room air. The difference is explained on the quote.

The gas line and its shutoff

A fireplace's gas supply is sized for its input and run to the fuel gas code, with a shutoff valve where the manual shows, so the unit can be isolated for service. That work belongs to a gas contractor.

Planning the fireplace so the connection point is clear, and timing it so the line is ready on installation day, our pros also check with the gas contractor that the supply matches the unit's rating plate.

Once connected, the unit's side is leak-tested and started up to the manual, and each trade's part is named on the quote. Nothing is lit until the connection passes its test.

The first burns in a new unit

New gas fireplaces smell for a while as paints and binders cure. Makers call it normal and advise opening windows and running a fan until it passes. One maker recommends a long first burn, several hours with the blower off, to get it over with.

Our pros give you your unit's break-in steps noted on the quote, since they vary by maker.

The smell should fade after the first few uses. A rotten-egg smell is different: that's gas, and the manual's steps are to get out and phone the gas supplier once outside. The written steps stay with the manual. Any question during those first fires is one call away.

Free Inspection

The free planning check, wall to roof

Walls where a direct-vent unit could vent straight out
Windows, doors, soffits and porches near a possible termination
Vent rise, run and elbows against the maker's table
Bedroom rules and the unit's listing, where it applies

Claim 10% off your first service

Book your gas fireplace install today and claim a 10% discount on your first service.

Call (352) 675-6366 Get a Free Inspection

FAQs

Picking the right gas unit

Who runs the gas line?

A gas contractor does. Our specialists plan the connection point and coordinate the timing, and the quote names each trade.

Can a gas fireplace go in a bedroom?

The fuel gas code limits it. Direct-vent units that take all their air from outside can go in a bedroom where their listing allows. Our pros check the room and the listing first.

Our Services