Want a gas fireplace in Lawtey? Ask our pros

Through the wall or up through the roof, our family-run pros plan the vent for your gas fireplace in Lawtey. The visit is free.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Power for the fireplace

Electricity for a gas fireplace? Many need it, for electronic ignition, a blower or a remote receiver, and some run on batteries. The manual says what the unit needs and that it must be grounded to the electrical code.

The outlet or connection gets planned with the unit. If a new circuit or outlet is needed, an electrician installs it, and the quote says so. Our pros also show you how the unit lights during a power outage, if its manual allows it. Outlets go where the manual puts them. Reserve a planning visit that covers power in Lawtey at (352) 675-6366.

The Gainesville reference point is roughly 31 miles from Lawtey as the crow flies. In our service area, Lawtey is grouped with Bradford County.

What's Included

Direct-vent units, fitted to the manual

Units vented straight out through the wall
Terminations placed to the clearance table
Floors under units prepared as the manual says
Installs in Lawtey with our workmanship warranty behind them

Call (352) 675-6366 Get a Free Inspection

Local Conditions

A TV above the gas fireplace

Planning the TV above a gas fireplace in Lawtey? Some gas units are designed for it, with heat directed away from the wall above. Our specialists check each unit's clearance chart before the wall is framed and recommend models that suit a TV above. Mantel height comes from the same chart. Units made for a TV wall are pointed out on the quote.

Our Process

Vent route settled before the unit arrives

Trace the vent routes

Walls, attic and roof are measured against the vent tables and termination clearances.
Choose and plan

You pick a unit, and the plan covers framing, gas, power and every trade involved.
Install to the manual

The unit is set, the vent assembled and pitched, and the gas contractor connects the line.
First flame and a walkthrough

Leak test, pressures, logs and barrier are checked, and you're shown how to use it.

Why Choose Us

Every trade named on your quote

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Units in Lawtey are installed to their own manual, from framing to the barrier screen.

Your written price is freeEach unit that fits, with its vent route, is given its own price for free, side by side.
Locally owned and operatedYour installer is locally owned and can service the gas fireplace in Lawtey later on.
No hidden fees, all upfrontNo hidden fees: vent parts, framing checks and startup are all on the written price.

Call (352) 675-6366 Get a Free Inspection

Units that use room air

Some gas fireplaces aren't sealed: they draw combustion air from the room and vent through a draft hood into a B-vent pipe or a lined chimney. The fuel gas code treats them differently, especially in bedrooms and small rooms.

They need enough room air to burn properly, and a house that pulls air in through its vents can upset their draft, which is why many carry a spill switch near the draft hood.

You'll hear the difference before you choose, and our pros may steer you toward a direct-vent model, which doesn't depend on room air. The difference is explained on the quote.

Keeping exhaust away from windows and doors

Exhaust leaving the termination shouldn't find its way back into the house. That's why each manual carries a clearance table, drawn from the national fuel gas code, that sets how far the termination must sit from windows and doors that open.

The distance can depend on the unit's input rating, and permanently closed windows have their own figure.

Every opening near the proposed spot is measured and compared with the table in your unit's manual. If the spot fails, our pros move it or recommend a roof termination. Those measurements are written into the plan. Nothing is cut until the spot passes.

Soffits, porches and decks

The termination table in each manual also covers what's above and around the vent: ventilated and unventilated soffits, porches, verandas and decks, inside corners and gas meters. Some of those are allowed with more distance; some aren't allowed at all.

A vent tucked under a porch roof, for example, can trap exhaust where people sit.

The whole area around the proposed termination is measured against the table, well beyond the nearest window. Vinyl soffits and siding may need extra clearance or a heat shield, and the maker's instructions settle that. The final spot is marked on the plan, with the distances to each feature.

Free Inspection

Vent tables and clearances, checked in Lawtey

Walls where a direct-vent unit could vent straight out
Vent rise, run and elbows against the maker's table
Mantel, facing and TV plans against the clearance chart
Power needs, outlet location and any new circuit

Claim 10% off your first service

Direct-vent or electric, your first install is 10% off when you book today.

Call (352) 675-6366 Get a Free Inspection

FAQs

Planning a gas fireplace? Ask us

Who runs the gas line?

A gas contractor does. Our specialists plan the connection point and coordinate the timing, and the quote names each trade.

Is a gas fireplace install covered by a warranty?

The install gets our workmanship warranty, and the maker's warranty on the unit applies under its own terms. Reserve your free planning visit in Lawtey at (352) 675-6366.

Our Services