Fanning Springs gas fireplace repairs, switch to flame

Our specialists test first, and you pay only for the part that actually broke. Free inspection in Fanning Springs.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Cloudy or sooty glass

Glass that looks cloudy or sooty needs assessment against the model's care instructions. Approved cleaning on a cool, switched-off appliance may remove deposits, but persistent marks, cracks or damaged seals need a closer look before further use. Appearance alone does not prove the cause.

Proper cleaning, a check of the gasket that seals the glass to the firebox, and a search for the cause of any soot, from misplaced logs to a pressure problem, sort it out. Glass that's etched or cracked is replaced with the maker's glass, since a unit shouldn't run with damaged glass. Reserve glass cleaning and a check in Fanning Springs by dialing (352) 675-6366.

The 2020 Census tallied 1,182 residents for Fanning Springs. Our Fanning Springs coverage is inland from the Gulf and Atlantic coasts.

What's Included

Fixed on gas units in Fanning Springs

Barrier screens checked or added where offered
Blower motors and switches replaced
Gas conversions done with the maker's kit
Water-damaged controls replaced before use

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Children, pets and hot glass

In a busy home in Fanning Springs, the glass on a gas fireplace is the part that gets hottest and sits at the right height for small hands and noses. Our pros check that the maker's barrier screen is in place, and for older units, they look up whether a barrier kit is offered. The part and fitting are priced separately.

How It Works

A gas repair visit in Fanning Springs

Watch it and read the plate

Our pros see the fault happen, then read the rating plate and pull up your unit's manual.
Test from switch to valve

Switch, receiver, sensors and ignition are tested in order, with readings recorded.
Repair with listed parts

The failed part is replaced with the maker's listed part, or the cause is cleaned and adjusted.
Check the whole unit

Checks appropriate to the model are completed and explained before any further work is proposed.

Why Choose Us

Specialists for pilots, ignition and valves

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

A local, family-run business that services the same fireplace year after year in Fanning Springs.

Your price, upfrontYou see the fault and the price for your gas fireplace in Fanning Springs before any part is ordered.
Same-day service is availableSame-day repair visits are available when the schedule allows and the part is on hand.
Our workmanship warrantyNew parts keep the maker's warranty, and our workmanship warranty sits on the repair itself.

Call (352) 675-6366 Get a Free Inspection

Electronic ignition faults

Plenty of newer gas fireplaces light with a spark instead of a standing pilot. A module sends a spark across a gap to light the pilot or burner, and a flame sensor confirms the flame. If the sensor doesn't see it, the module locks out after a few tries.

The maker's troubleshooting flow chart walks through the spark gap, the ceramic insulator, the ignition cable and the flame sensor, which should sit in a steady blue flame.

Following that chart, our pros fix what's wrong and reset the module the way the manual describes. Batteries in any backup pack are checked too.

Keeping hands off hot glass

Gas fireplace glass can get hot enough to burn a hand that touches it. The 2015 revisions to ANSI Z21.88 and Z21.50, the safety standards for these units, call for a protective barrier on units whose glass gets hotter than a threshold the standard sets, and that barrier is meant to stay installed.

Every service includes making sure the barrier is in place and undamaged. On older units made before the change, our specialists look up whether the maker offers a barrier kit.

In homes with small children or pets, it's one of the most useful parts on the fireplace. The part and fitting are priced separately.

Keeping an older gas fireplace going

Older gas fireplaces can run for many years with the right care. The rating plate tells our pros the maker and model, and from there they find the listed parts.

Sensors, igniters, gaskets and logs may still be made, or replaced by the maker with listed substitutes. When a key part, like the valve or the firebox, is no longer available, they'll tell you and price a replacement unit next to the repair.

What they won't do is fit parts from another model that aren't listed for yours, since that breaks the unit's listing and can void what's left of the maker's warranty.

Free Inspection

Readings taken before any price

Spark ignition, the flame sensor and any module lockout
The safety barrier in front of the glass, and its condition
Vent joints, their pitch and the termination outside
Spill switch on units vented through a chimney

Claim 10% off your first service

The first gas fireplace repair we make for you is 10% off when you book today.

Call (352) 675-6366 Get a Free Inspection

FAQs

Gas unit trouble in Fanning Springs

Can you repair my gas fireplace in Fanning Springs?

We can. Our gas fireplace specialists work from your unit's manual on your free inspection in Fanning Springs. Having the make and model handy saves time on the visit.

Can my fireplace be switched to propane?

With the maker's conversion kit for your model, yes. Our pros fit it and set the pressures to the rating plate; supply changes go to a gas contractor or your supplier. Talk to us about it in Fanning Springs at (352) 675-6366.

Our Services