Hague gas fireplace repairs, switch to flame

Cloudy glass, sooty logs or a yellow, lazy flame? Claim a free gas fireplace inspection in Hague.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

The safety screen in front of the glass

Is there a mesh barrier over the glass on your gas fireplace? Glass on a gas unit gets very hot, and newer units, built after the 2015 revisions to their safety standards, ship with a barrier that's meant to stay in place.

On a service, the barrier gets checked for fit and damage, and for older units without one, you'll hear whether the maker offers a barrier kit. It's a simple way to keep small children and pets from touching hot glass. The part and fitting are priced. Speak with our specialists about a safety screen for your fireplace in Hague by dialing (352) 675-6366.

In a straight line, Hague lies about 8 miles from the Gainesville reference point. We cover Hague along with the rest of our Alachua County area.

What's Included

Switch, sensors, valve and glass

Pilots that drop out diagnosed with a meter
Burners and pilots cleaned of lint and dust
Glass gaskets replaced and fronts resealed
Annual service for gas fireplaces in Hague

Call (352) 675-6366 Get a Free Inspection

Local Conditions

When the remote goes dead

Remote controls on gas fireplaces in Hague have batteries in the handheld and the receiver, and receivers have switch settings that can get bumped. Our specialists check both sets of batteries, the receiver settings and the pairing, then test the valve directly to find where the fault is. The manual override is shown to you too, so a dead battery doesn't leave you without a fire.

How It Works

Tested before any part is swapped

Watch it and read the plate

Our pros see the fault happen, then read the rating plate and pull up your unit's manual.
Test from switch to valve

Switch, receiver, sensors and ignition are tested in order, with readings recorded.
Repair with listed parts

The failed part is replaced with the maker's listed part, or the cause is cleaned and adjusted.
Check the whole unit

Checks appropriate to the model are completed and explained before any further work is proposed.

Why Choose Us

Gas fireplaces repaired to the manual in Hague

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Repairs in Hague start at the switch and work toward the valve, with a meter at each step.

Your price, upfrontYou see the fault and the price for your gas fireplace in Hague before any part is ordered.
Same-day service is availableSame-day repair visits are available when the schedule allows and the part is on hand.
Our workmanship warrantyNew parts keep the maker's warranty, and our workmanship warranty sits on the repair itself.

Call (352) 675-6366 Get a Free Inspection

Gas type and conversion kits

Natural gas or propane: every unit is built for one of the two, and its rating plate says which. Burning the wrong gas, or running a unit set for one gas on the other, produces the wrong flame and can be dangerous.

Changing over calls for the conversion kit the maker offers for your exact model, with new orifices and settings, installed to the maker's instructions. Our pros fit the kit, set the pressures to the rating plate and apply the conversion label.

The supply side, from the meter or tank to the unit's shutoff, is a gas contractor's or supplier's work, and the quote says so.

What a healthy flame looks like

Each gas fireplace manual describes, and in most cases pictures, how the flame should look once the unit has warmed up. Many log sets are designed with yellow, lively flames, and some burners show more blue, so the manual is the reference for your unit.

Our specialists let the unit run long enough to settle, then compare the flame with the manual. Soot on the logs or glass, flames lifting off the burner, or a flame much bigger or smaller than pictured all point to a cause.

From there, they check logs, burner ports, air shutter and pressure in turn, and record only what they've measured.

Haze and soot on the glass

A white film on the inside of the glass builds up over time from normal combustion, and makers sell cleaners made for it. Ordinary glass cleaners can leave residue that bakes on when the unit heats.

Black soot is different. It means the flame is burning dirty, from misplaced logs, a clogged burner or the wrong pressure, and cleaning it off without fixing the cause just brings it back.

Once the unit is cool, the glass is cleaned with the right product, and then the search for the cause of any soot begins. Glass that has etched and won't clear is replaced with the maker's glass.

Free Inspection

Your gas unit, tested free

Shape of the pilot flame against the manual's drawing
Thermocouple and thermopile readings taken at the gas valve
Burner ports, air openings and the control compartment
Anything that was under water, listed for replacement

Claim 10% off your first service

Reserve today, and a first gas fireplace repair from our pros is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Gas fireplace fixes, answered

Why won't my pilot stay lit?

The thermocouple or thermopile may be worn or out of the flame, or the pilot may be clogged. Our pros meter-test the sensors and check the pilot flame before replacing anything.

Can you fix a fireplace that got wet?

Makers say not to use a unit if any part was under water. Our specialists replace every control part the water reached with the maker's parts before it runs again.

Our Services