Fixing gas fireplaces for homes in Melrose

A gas fireplace that will not run properly deserves a model-specific check. Arrange a free inspection in Melrose.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Nothing happens at the switch

Flip the wall switch or press the remote and nothing happens at all? The problem might be the switch, the wiring, the receiver, a dead battery pack, a tripped power supply or the gas valve itself.

Testing starts at the switch and works toward the valve, one link at a time, the way the unit's manual lays out. A switch or receiver is a much cheaper fix than a valve, and testing first keeps you from paying for the wrong one. You'll see the fault and the price before any part is ordered. Reserve a gas fireplace diagnosis in Melrose: (352) 675-6366.

Melrose is a listed service location spanning Alachua, Bradford, Clay and Putnam counties. This does not extend our service area to every address in those counties; confirm your location when booking.

Melrose is roughly 18 straight-line miles from the Gainesville reference point. Melrose spans Alachua, Bradford, Clay and Putnam counties. Its place on our town list does not imply coverage throughout those counties.

What's Included

Gas fireplace fixes our pros make in Melrose

Pilots that drop out diagnosed with a meter
Barrier screens checked or added where offered
Water-damaged controls replaced before use
Annual service for gas fireplaces in Melrose

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Wasps and nests in the vent

Insects and birds can build in the outside termination of a gas fireplace in Melrose, especially over months when it isn't used. A blocked termination can make the unit shut down or burn poorly. Our pros check the termination and clear what's there, and they'll suggest whether a guard listed by the vent maker is available for your termination. Clearing it before the next use keeps the unit venting properly.

How It Works

Test first, replace second

Watch it and read the plate

Our pros see the fault happen, then read the rating plate and pull up your unit's manual.
Test from switch to valve

Switch, receiver, sensors and ignition are tested in order, with readings recorded.
Repair with listed parts

The failed part is replaced with the maker's listed part, or the cause is cleaned and adjusted.
Check the whole unit

Checks appropriate to the model are completed and explained before any further work is proposed.

Why Choose Us

Gas fireplace pros who find the fault first

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Safety features like spill switches get fixed at the cause and stay in service in Melrose.

Your price, upfrontYou see the fault and the price for your gas fireplace in Melrose before any part is ordered.
Same-day service is availableSame-day repair visits are available when the schedule allows and the part is on hand.
Our workmanship warrantyNew parts keep the maker's warranty, and our workmanship warranty sits on the repair itself.

Call (352) 675-6366 Get a Free Inspection

Checking gas pressure at the valve

Every gas fireplace has two pressures listed on its rating plate: the inlet pressure coming into the valve and the manifold pressure going to the burner. The valve has test points where a gauge can read both.

Low inlet pressure starves the flame; the wrong manifold pressure makes it too big or too small. Our specialists read both with a gauge and compare them with the plate.

If the inlet pressure is off, the problem is upstream, in the supply or the regulator, and that's for your gas supplier or a gas contractor. If the manifold pressure is off, it's set at the valve, and the reading goes on your quote.

Haze and soot on the glass

A white film on the inside of the glass builds up over time from normal combustion, and makers sell cleaners made for it. Ordinary glass cleaners can leave residue that bakes on when the unit heats.

Black soot is different. It means the flame is burning dirty, from misplaced logs, a clogged burner or the wrong pressure, and cleaning it off without fixing the cause just brings it back.

Once the unit is cool, the glass is cleaned with the right product, and then the search for the cause of any soot begins. Glass that has etched and won't clear is replaced with the maker's glass.

Inside the yearly gas fireplace service

Manuals for gas fireplaces call for a yearly check by a qualified service person, and each lists what to look at. Our pros work from your unit's list, which covers cleaning the burner, pilot and control compartment, and checking the flame against the manual's picture.

They test the sensors or ignition, look at the glass gasket and latches, and check the vent and termination for damage, blockage and loose joints. Logs and embers are placed to the layout.

Keep the appliance manual and any earlier service paperwork together. They help you discuss recurring symptoms and review which parts or adjustments have already been tried. Proposed repairs come with a written estimate, so a service visit does not leave you guessing about the next cost.

Free Inspection

Switch to vent, checked free

Shape of the pilot flame against the manual's drawing
Glass, gasket and latches that seal the front
Vent joints, their pitch and the termination outside
Spill switch on units vented through a chimney

Claim 10% off your first service

Get the flame back in Melrose; a first repair is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

When the pilot, igniter or glass acts up

Smell gas near the fireplace?

Leave the switches and controls alone. Get everyone out, then phone 911 or your gas company once you're outside. Once they've made it safe, our specialists can inspect and repair the unit.

Can you fix a fireplace that got wet?

Makers say not to use a unit if any part was under water. Our specialists replace every control part the water reached with the maker's parts before it runs again.

Our Services