Service for gas fireplaces in Micanopy, FL

Pilot quits as soon as the knob is released? Our pros meter-test it on your free inspection in Micanopy.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Converting to a different gas

Switching from propane to natural gas, or the other way round? The gas type a fireplace burns is set on its rating plate, and changing it takes the maker's conversion kit, installed to the maker's instructions.

Our specialists identify the kit for your model, install it, set the pressures to the rating plate and update the labels. The gas supply changes themselves are a gas contractor's or supplier's job, and the quote says who does what. The rating plate is updated to match. Talk to our gas fireplace pros about a conversion in Micanopy: (352) 675-6366.

Micanopy is home to Micanopy Historic District. From the Gainesville reference point, Micanopy is about 13 miles away in a direct line.

What's Included

Fixed on gas units in Micanopy

Electronic ignition faults traced and reset
Burners and pilots cleaned of lint and dust
Glass gaskets replaced and fronts resealed
Vent leaks and pitch problems corrected

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Glass haze from occasional use

If glass on a gas fireplace in Micanopy becomes hazy, follow the model's cleaning instructions only once the appliance is off and cool. Persistent clouding, cracks or damaged seals need assessment before further use. Our pros discuss whether cleaning or an approved replacement is appropriate after checking the actual condition.

How It Works

A gas repair visit in Micanopy

Watch it and read the plate

Our pros see the fault happen, then read the rating plate and pull up your unit's manual.
Test from switch to valve

Switch, receiver, sensors and ignition are tested in order, with readings recorded.
Repair with listed parts

The failed part is replaced with the maker's listed part, or the cause is cleaned and adjusted.
Check the whole unit

Checks appropriate to the model are completed and explained before any further work is proposed.

Why Choose Us

Specialists for pilots, ignition and valves

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

A local, family-run business that services the same fireplace year after year in Micanopy.

Your price, upfrontYou see the fault and the price for your gas fireplace in Micanopy before any part is ordered.
Same-day service is availableSame-day repair visits are available when the schedule allows and the part is on hand.
Our workmanship warrantyNew parts keep the maker's warranty, and our workmanship warranty sits on the repair itself.

Call (352) 675-6366 Get a Free Inspection

Reading the pilot flame

The pilot flame has a job: it has to wrap the thermocouple and thermopile and reach across to the main burner. Makers show the right flame in a diagram in the manual, and a weak, lazy or misdirected pilot causes a lot of lighting trouble.

Dust, lint and spider webs in the pilot orifice or the pilot hood shrink or bend the flame. Our specialists clean the pilot assembly, check the flame against the diagram and adjust what the manual allows.

Once the flame looks the way the maker drew it, the sensors get their heat and the unit lights reliably.

Remotes, receivers and wall controls

Many gas fireplaces run from a remote, a wall control or a smart module, talking to a receiver near the valve. Batteries sit in both the handheld and the receiver, and receivers have their own switch positions.

When the remote stops working, our specialists check both sets of batteries, the receiver's switch setting and its pairing with the handheld, then test the valve directly to see if the fault is in the control or beyond it.

A failed receiver is replaced with one listed for the valve, and you're shown the manual override for next time, so a dead battery doesn't leave you without a fire.

CO alarms near a gas unit

Any gas appliance can produce carbon monoxide when something is wrong, and an alarm is how you'd know, since the gas has no smell. Makers list early symptoms of exposure, such as headaches, dizziness and nausea, and advise getting fresh air.

If a CO alarm is sounding, get everyone outdoors, then call 911 from outside.

On every service, our pros check the glass seal, the vent and the flame, the parts that keep combustion gases where they belong, and suggest testing the alarms near the fireplace and bedrooms while the visit is underway. Alarms are cheap, and they work.

Free Inspection

Readings taken before any price

Thermocouple and thermopile readings taken at the gas valve
Where each log sits, and any logs that are cracked or broken
Spill switch on units vented through a chimney
The blower, its temperature switch and the fan wheel

Claim 10% off your first service

Reserve today, and a first gas fireplace repair from our pros is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Gas unit trouble in Micanopy

Does the valve need replacing?

Only if testing says so. Maker troubleshooting charts have the valve replaced last, after the sensors and switch test good, and our pros follow that order with a meter.

Do gas fireplaces need yearly service?

Follow the service interval in your appliance's manual. Our pros can discuss that model's checks and any symptoms you've noticed before arranging the visit.

Our Services