Sloped, sealed chase tops fitted in Hague, FL

New cover, collar and storm collar, priced up front after a free look at your chase in Hague.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Replacement day at your house

Wondering what the job looks like? Our pros protect the roof around the chase, remove the chimney cap and storm collar, and take off the old cover and its fasteners.

They check the framing at the top of the chase, set the new cover with its collar over the pipe, fasten it through the turndown and seal the seams. Next the storm collar is refitted and sealed the way the chimney maker's instructions describe, and the listed cap returns to the pipe. Before leaving, they show you the finished top from a safe spot. Speak with our pros about replacement day in Hague by dialing (352) 675-6366.

A straight line from the Gainesville reference point to Hague runs about 8 miles. Hague is on our Alachua County list of places we serve.

What's Included

Lid, collars and framing in one visit

Rusted chase covers replaced
Covers made to measure for each chase
Soft framing repaired before the new cover
Covers fastened with corrosion-resistant screws

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Insulation around the pipe

Insulation inside a chase in Hague can slump against the chimney pipe after years of water from a failing cover, closing the clearance the chimney's listing calls for. Our specialists note any insulation touching the pipe where it can be seen and price correcting it to the listing. Wet insulation is replaced once the leak is stopped. The correction follows the chimney's listing.

How It Works

A cover made to fit your chase

Check lid and box

The cover, collar, storm collar and cap are looked over first, along with the framing beneath.
Measure and order

The chase top is measured on every side, and the cover is made with slope and collars.
Fit and fasten

Soft framing is repaired, and the new cover is set, fastened through the sides and sealed.
Seal and cap

The storm collar is sealed to the maker's instructions and the listed cap goes back on.

Why Choose Us

Covers cut to your chase in Hague

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Every chase in Hague gets measured on site, so the new cover is made to fit its edges.

Your written price is freeThe price for the lid, the collar and anything wrong with the box beneath comes on a written quote, free.
Same-day service is availableSame-day visits are available to cover a leaking chase in Hague until the new top arrives.
Family owned and runA family-owned business that measures twice so your chase cover fits the first time.

Call (352) 675-6366 Get a Free Inspection

The collar where the pipe comes through

The pipe opening and collar are part of the chase-top design. Their dimensions and joints must follow the instructions for the actual system, including any ventilation that must remain open. Our pros check those details before a cover is ordered.

The opening must allow the movement and ventilation specified for the actual chimney. A collar dimension from another manual cannot establish that clearance, and required gaps must not simply be filled with sealant.

Our pros measure the pipe positions and inspect the existing joints before specifying a cover. The proposed collar and fastening details should explain how the replacement suits this system and manages water around each opening.

Keeping animals out of the chase

A rusted hole in the cover, a gap at the edge or a missing storm collar can give animals a sheltered route into the chase. From there, some find their way down toward the fireplace.

Before a new cover goes on, our pros make sure nothing is nesting in the chase, since sealing it up with an animal inside creates a bigger problem. If something is there, our animal removal specialists deal with it first.

The new cover then fits tight on every edge, and the listed cap on the pipe keeps the flue itself closed to them. Nothing gets sealed inside.

Chase covers and a new roof

A reroof is a good time to deal with the chase. The roofers will be flashing around the base of the chase, and replacing a rusting cover at the same time means the whole chase is sealed top and bottom in one project.

Our pros coordinate with your roofer so the cover goes on while the roof is being worked on, and they check that the flashing at the chase base ties in behind the siding correctly.

The quote splits the work between the chimney side and the roofing side, so each trade knows exactly what's theirs. One project, one cleanup.

Free Inspection

Checked free before a chase cover is priced

Collar height, fit and seams around each chimney pipe
Storm collar seating and sealant on the pipe
Pipe height above the roof against the maker's rule
Signs of animals inside the chase before sealing it

Claim 10% off your first service

A rusty lid is worth replacing now, and a first booking knocks 10% off it.

Call (352) 675-6366 Get a Free Inspection

FAQs

Ask our pros about chase tops in Hague

Do your pros cover Hague for chase cover work?

We do. Homes across Alachua County are on our list, Hague included, and our pros look over the cover, both collars and the framing beneath at no charge. Mention any rust streaks on the siding when you phone.

Can you fit a new cover on the same day?

Chase covers are made to measure, so the first visit measures and the second fits. If the chase is leaking now, our pros can cover the top in the meantime.

Our Services