Your chimney chase capped right in Jonesville, FL

Water in the firebox of a factory-built fireplace? Book a free chase inspection in Jonesville and find the source.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Peeling paint on the chase top

Chase cover painted to match the house, and now the paint is flaking off with rust underneath? Paint on galvanized steel protects it for a while, but once it fails, water sits in the flakes and rust spreads quickly.

We check whether the metal under the paint is sound. A cover with light surface rust can be cleaned and recoated; one with pitting or holes needs replacing. A stainless cover avoids the painting cycle altogether. You'll see both options priced. If rust has reached the chase framing, that's priced separately. Reserve a look at the painted chase top in Jonesville at (352) 675-6366.

Our Alachua County coverage includes Jonesville. Jonesville lies inland from the Gulf and Atlantic coasts.

What's Included

Chase top work that comes with the job in Jonesville

Turned-down edges with a working drip
Multi-pipe chases fitted with matching collars
Fresh covers fitted on chases in Jonesville
Old covers hauled away from Jonesville

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Fasteners on inland chases

Even inland in Jonesville, ordinary screws holding a chase cover rust and leave streaks, and screws in soft wood pull loose in wind. Our specialists use corrosion-resistant screws through the turndown, into sound framing, and repair any soft wood first. The screw heads are sealed at the turndown so water can't follow them in. The fastener type is on the quote, and the framing is checked before the cover goes on.

How It Works

What replacement day in Jonesville involves

Check lid and box

The cover, collar, storm collar and cap are looked over first, along with the framing beneath.
Measure and order

The chase top is measured on every side, and the cover is made with slope and collars.
Fit and fasten

Soft framing is repaired, and the new cover is set, fastened through the sides and sealed.
Seal and cap

The storm collar is sealed to the maker's instructions and the listed cap goes back on.

Why Choose Us

Chase cover pros who check the box too

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Siding, framing and roofing work are named on the quote with the right trade.

Your written price is freeThe price for the lid, the collar and anything wrong with the box beneath comes on a written quote, free.
Same-day service is availableSame-day visits are available to cover a leaking chase in Jonesville until the new top arrives.
Family owned and runA family-owned business that measures twice so your chase cover fits the first time.

Call (352) 675-6366 Get a Free Inspection

Covers for chases with several pipes

Two chimney pipes, or a pipe and a vent for another appliance, can share one chase. The cover needs a separate collar for each, and each termination needs room around it.

Where several terminations share a chase, the permitted separation and relative heights need checking for those systems. Their arrangement cannot be selected from another model's drawing. The replacement cover must accommodate the approved layout without obstructing required openings.

Our specialists measure every pipe's position, check the spacing and heights against the maker's guidance, and have the cover made with collars to match. If spacing is off, they'll explain the options. The spacing goes on the quote.

Chase covers and a new roof

A reroof is a good time to deal with the chase. The roofers will be flashing around the base of the chase, and replacing a rusting cover at the same time means the whole chase is sealed top and bottom in one project.

Our pros coordinate with your roofer so the cover goes on while the roof is being worked on, and they check that the flashing at the chase base ties in behind the siding correctly.

The quote splits the work between the chimney side and the roofing side, so each trade knows exactly what's theirs. One project, one cleanup.

Setting the new chase cover in place

On replacement day, our pros protect the roof, remove the listed cap and the storm collar, and pull the old cover and its fasteners. They check the top of the framing and repair anything soft before the new cover goes on.

The made-to-measure cover is set with its collar over the pipe, the turndown lapped over the siding, and fastened through the sides. Seams are sealed.

Next the storm collar is refitted and sealed per the chimney maker's instructions, and the cap returns to the pipe. The old cover leaves with them, and the roof below is cleaned. Old fasteners go too.

Free Inspection

Your chase top, inspected at no charge

Listed cap on the pipe and any decorative shroud
Siding and stains down the sides of the chase
Firestops and insulation clearance seen inside the chase
Signs of animals inside the chase before sealing it

Claim 10% off your first service

Stainless or galvanized, the first cover we fit for you is 10% off if you book today.

Call (352) 675-6366 Get a Free Inspection

FAQs

Chase top questions we hear

Do you fix rotten wood under the cover?

Our pros repair the framing at the top of the chase so the new cover has solid wood to fasten into. Larger carpentry and siding work is named on the quote with the right trade.

Can you clean the rust stains off my siding?

In many cases, once the new cover stops the source. Our pros test a small area first, since results depend on the siding. Talk to us about it in Jonesville at (352) 675-6366.

Our Services