Lake Butler chase covers, made to measure

Measured, made to fit and fastened right by our pros in Lake Butler, after the free look.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Chase covers backed by our warranty

Concerned a new cover will rust out like the old one? Our pros fit covers sloped to shed water, fastened securely and sealed right, and the workmanship comes with our warranty.

Your quote lists the cover's metal, its dimensions and how the collar and storm collar were sealed, so there's no question later about what was done. If something isn't right, call and we'll come back to look. It's our 100% satisfaction guarantee at the top of your chimney. The metal chosen and its fasteners are listed too. Reserve a chase cover backed by our warranty in Lake Butler at (352) 675-6366.

In a straight line, Lake Butler lies about 23 miles from the Gainesville reference point. We cover Lake Butler along with the rest of our Union County area.

What's Included

Lid, collars and framing in one visit

Sloped tops that shed water to the edges
Turned-down edges with a working drip
Collars on the pipe reseated and sealed
Old covers hauled away from Lake Butler

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Storm wind on a chase in Lake Butler

A strong storm can reach well inland and peel a loose chase cover edge up, or drop a limb that dents the cover into a bowl that holds water.

Once the wind drops, our pros look over every part at the chase top, refasten what's loose, and replace what's damaged. If rain is due, a temporary cover goes on first. The pipe cap is checked at the same time.

How It Works

A cover made to fit your chase

Check lid and box

The cover, collar, storm collar and cap are looked over first, along with the framing beneath.
Measure and order

The chase top is measured on every side, and the cover is made with slope and collars.
Fit and fasten

Soft framing is repaired, and the new cover is set, fastened through the sides and sealed.
Seal and cap

The storm collar is sealed to the maker's instructions and the listed cap goes back on.

Why Choose Us

Covers cut to your chase in Lake Butler

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Every chase in Lake Butler gets measured on site, so the new cover is made to fit its edges.

Your written price is freeThe price for the lid, the collar and anything wrong with the box beneath comes on a written quote, free.
Same-day service is availableSame-day visits are available to cover a leaking chase in Lake Butler until the new top arrives.
Family owned and runA family-owned business that measures twice so your chase cover fits the first time.

Call (352) 675-6366 Get a Free Inspection

Caulk around the pipe isn't the fix

It's tempting to caulk the pipe tight to the collar and call it done. Majestic's instructions warn against caulking the chimney pipe to the chase top collar, since the pipe needs to move as it heats and some systems rely on air moving around it.

The storm collar is what sheds water from that gap, and it's sealed to the pipe the way the chimney maker describes.

Our specialists follow each maker's instructions for which joints get sealant and which stay open. Sealing the wrong gap can damage the chimney, so the manual for your model is read before any caulk comes out.

The cap on top of the pipe

The cap on a factory-built chimney pipe is part of the tested system, and chimney makers call for the cap listed for that fireplace and chimney. The Florida Building Code allows a decorative shroud over a factory-built chimney only when it's listed and labeled for that chimney.

Swapping a chase cover means lifting the cap off and putting it back, so it gets checked for rust and damage while it's off.

If it needs replacing, our pros read the rating plate and fit the listed cap instead of a generic one that looks close. The rating plate is the guide.

Chase covers and a new roof

A reroof is a good time to deal with the chase. The roofers will be flashing around the base of the chase, and replacing a rusting cover at the same time means the whole chase is sealed top and bottom in one project.

Our pros coordinate with your roofer so the cover goes on while the roof is being worked on, and they check that the flashing at the chase base ties in behind the siding correctly.

The quote splits the work between the chimney side and the roofing side, so each trade knows exactly what's theirs. One project, one cleanup.

Free Inspection

Checked free before a chase cover is priced

Metal of the cover, rust, holes and low spots that hold water
Storm collar seating and sealant on the pipe
Framing at the top of the chase for softness and rot
Signs of animals inside the chase before sealing it

Claim 10% off your first service

Your first chase cover from our family business is 10% off when you reserve it today.

Call (352) 675-6366 Get a Free Inspection

FAQs

Ask our pros about chase tops in Lake Butler

Should I choose galvanized or stainless?

Galvanized costs less and lasts well if it slopes and sheds water. Stainless costs more, lasts much longer and doesn't need painting. Our specialists price both.

Chase cover or chimney cap, which is which?

No. The cover seals the top of the framed box; the cap sits on the pipe. Our specialists check both and price each separately, so you only replace the one that's failing.

Our Services