Inspecting chimneys and fireplaces in Fanning Springs

Buying, selling or just curious? Our local pros inspect chimneys in Fanning Springs for free and tell you what they find in everyday words.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Switching fuels or changing the appliance

Thinking about converting a wood fireplace to gas, or adding an insert to an open fireplace? Each appliance has its own needs for flue size, liner type and clearances, and a chimney that suited the old one may not suit the new.

With the new appliance in mind, our pros compare the flue size against it and look at how the old setup left the liner and smoke chamber. You'll know what the change requires before you buy anything, and who handles each part of the job. Talk to one of our local pros about your appliance change in Fanning Springs at (352) 675-6366.

Fanning Springs State Park is located inside Fanning Springs. Fanning Springs is roughly 35 straight-line miles from the Gainesville reference point.

What's Included

Everything the inspection covers in Fanning Springs

Crown and cap looked over up on the roof
Firebox and hearth checked for cracks and gaps
Stove connectors and thimbles checked against NFPA 211
Chimney height measured against the code minimum

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Inspecting after rough weather

From the ground, a chimney in Fanning Springs can look fine after a strong storm while the cap sits crooked or the flashing has lifted. Those may not leak right away.

An inspection after rough weather checks the top of the chimney and the attic side, so small damage is caught before the next heavy rain turns it into a stain on the ceiling.

How It Works

The yard, the roof and the attic in Fanning Springs

A few questions, then outside

We ask what you've noticed, then check the chimney from the ground and the roof.
Inside, firebox to flue

Firebox, hearth, damper, smoke chamber and flue get a light and a mirror, and you can watch.
Attic and connections

Clearances, fireblocking and any stove or insert connection within reach are checked.
Findings in writing

Our pros explain the findings and provide a written estimate for any proposed repairs.

Why Choose Us

Inspections you can watch in Fanning Springs

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Every part from the cap to the hearth gets checked in Fanning Springs, including the attic side where there's access.

Free inspection firstInspecting costs you nothing for homes in Fanning Springs; you only pay for repairs you choose to make.
Locally owned and operatedWe're locally owned, so the pro who inspected your chimney can return for the repair.
Same-day service is availableSame-day inspections are available when the schedule has room, handy before a closing.

Call (352) 675-6366 Get a Free Inspection

Firebrick and mortar in the firebox

The firebox takes the direct heat of every fire. Its lining is firebrick laid in refractory mortar, and over time the joints erode, bricks crack and pieces spall off the face.

Back wall, sides and floor all get a look, with loose-looking brick tapped and gaps traced to see if they go through to the masonry behind. Surface cracks in firebrick can be cosmetic; open joints and missing pieces aren't, because heat can pass through them. You'll hear which kind you have and what a repair would take, from fresh joints to new brick, before anything is booked.

Checking the chimney's height against the roofline

Too short a chimney draws poorly and can drop sparks onto the roof. The Florida Building Code's minimum is 3 feet over the roof where the chimney exits, and 2 feet taller than any part of the building within 10 feet.

Both rules get measured, which matters most on homes where a roof has been raised or an addition built nearby. If the chimney falls short, you'll hear what raising it involves, and your quote says who does that work. You'll see the measurements and the price before anything is decided, and you can check them yourself.

Furnace and water heater flues in the chimney

Venting a gas furnace or water heater through masonry takes a lining made for that appliance. Under the Florida Building Code, a masonry chimney needs a lining suited to the appliance it serves, and a flue built for a wood fireplace can be too big or the wrong material for gas exhaust.

An oversized flue lets gas exhaust cool and condense, and that moisture works on the mortar from the inside. Our pros check how each appliance flue is lined and sized and look for signs of condensation. If a liner is needed, the options are priced separately, sized to the appliance's own instructions.

Free Inspection

What the free inspection takes in

Hearth size and cracks in front of the opening
Rating plate and listed parts on a factory-built fireplace
Each flue, where the chimney serves more than one appliance
Height above the roof against the building code rules

Claim 10% off your first service

Claim a 10% discount on your first service in Fanning Springs when you book it today.

Call (352) 675-6366 Get a Free Inspection

FAQs

Getting ready for a chimney inspection

Is the chimney inspection really free in Fanning Springs?

Yes. The chimney inspection is free, and any proposed repair comes with a written estimate. You decide whether to book that work.

What if my roof is too steep to walk?

Our specialists inspect the chimney top from a ladder or roof bracket instead, and the summary says what was seen up close and what was seen from a distance. Nothing is skipped without telling you.

Our Services