Stainless liners fitted in Fanning Springs, FL

Liners for open fireplaces, wood inserts and gas appliance flues, fitted in Fanning Springs after your free inspection.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Converting a fireplace to gas

Switching a wood fireplace over to a gas appliance? The gas unit's instructions set the venting, and a clay flue built for wood smoke tends to be far too big for gas exhaust. That leads to condensation inside the flue.

Our specialists size a liner to the gas appliance's instructions and fit one made for gas exhaust, sealed at the top. The gas line itself is a gas contractor's work, and your quote says who handles it. The liner and the appliance hookup are planned together, so nothing is missed. Talk to our pros about lining for a gas conversion in Fanning Springs by phoning (352) 675-6366.

In a straight line, Fanning Springs lies about 35 miles from the Gainesville reference point. We cover Fanning Springs along with the rest of our Levy County area.

What's Included

Liner, insulation, connector and top plate

Top plates sealed and caps fitted
Tees and cleanout caps at the base
Wood inserts connected to full-length liners
Old aluminum liners checked against the appliance

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Wood heat and deposit in the liner

Heating your home in Fanning Springs with a wood insert means long fires for the liner, and more deposit than an occasional fireplace gives it. Our pros size the liner so the flue stays warm, insulate it where the listing calls for it, and set a sweep schedule that keeps deposit from building up in the new liner.

How It Works

Test piece first, then the full liner in Fanning Springs

Read the appliance

The rating plate and manual come first, then the flue is measured and inspected.
Sweep and prove the path

After a sweep, a test piece is run down the flue to confirm the liner will pass.
Wrap, feed and connect

The liner is insulated where needed, fed down, and connected at the bottom.
Seal the top, explain break-in

The top plate and cap go on, the draft is checked, and you get break-in steps.

Why Choose Us

Chimney liners sized right in Fanning Springs

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

The gas line on a conversion is a gas contractor's work, and your quote says who does it.

Your price, upfrontThe liner, insulation and install are priced up front, before anything is ordered for Fanning Springs.
Our workmanship warrantyThe liner has its maker's warranty, and our workmanship warranty covers how we installed it.
Locally owned and operatedLocally owned, so the liner we install is one we can come back and sweep.

Call (352) 675-6366 Get a Free Inspection

Full-length liners for wood inserts

Smoke leaves a wood-burning insert through a collar at the top. Connecting that collar to a full-length liner, running to the top of the chimney, keeps the smoke in a flue sized for the insert instead of spreading into the large clay flue the fireplace had.

The smaller flue stays warmer, drafts better and collects less deposit. Our pros size the liner to the insert's collar and its instructions, fit the connection at the bottom and seal the top.

The insert's manual may also call for insulation on the liner, and that's included where it applies. Everything is priced before the insert goes in.

What cracked tiles let through

Clay flue tiles keep heat, smoke and moisture inside the flue. When they crack, shift or lose their joints, heat reaches the brick around them, smoke finds its way into the masonry, and in some chimneys it can reach framing nearby.

Tiles crack from chimney fires, from years of heating and cooling, and from settling. Once they're broken, they can't be patched from the inside in a way that lasts.

Our specialists recommend relining with a continuous stainless liner that doesn't depend on the old tile, and until that's done, the fireplace stays out of use. The reason is written on your quote.

Condensation in an oversized flue

Gas exhaust carries water vapor. In a flue that's too large or too cold, the exhaust cools before it leaves, and the water condenses on the flue walls.

That moisture carries acids that eat mortar joints, crack tile and stain the chimney from inside, showing up as white crust and damp patches that look like a rain leak. A liner sized to the appliance keeps the exhaust warm enough to leave as vapor.

Any flue serving a gas appliance is checked for condensation damage, and the new liner is sized to stop it. The appliance's own instructions set the size.

Free Inspection

The free relining inspection, flue first

Condition of the clay tile and its joints
Crown and flue top where the liner's top plate will sit
Damper condition and what the new setup needs
Liner alloy, size, insulation and listing, each priced

Claim 10% off your first service

Relining for the first time with our pros? Arrange a visit and it's 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Relining, answered in short

Can a liner go through a bent flue?

A flexible stainless liner can pass most offsets. Our specialists prove the path with a test piece first, so you'll know before anything is ordered.

Why is my water heater flue crumbling?

It may be too big for the water heater, especially after a furnace change, so the exhaust condenses inside. A liner sized to the water heater stops it. Talk to us about it in Fanning Springs at (352) 675-6366.

Our Services