Stainless liners fitted in Hague, FL

The appliance you burn picks the liner. Local pros size and fit it in Hague after a free look at the flue.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Cracked flue tiles found on an inspection

Were you told the clay flue tiles are cracked or missing? That's a reason to keep the fireplace cold. The liner is what keeps heat and smoke inside the flue, and broken tiles let both reach the masonry and, in some chimneys, the wood framing beyond it.

Relining with a stainless liner is the usual fix, since it runs as one piece from the firebox or appliance to the top and doesn't depend on the old tiles. Our specialists confirm the damage, measure the flue, and price the liner and its insulation. Reserve a relining visit for the cracked flue at your home in Hague by dialing (352) 675-6366.

Our Hague coverage is inland from the Gulf and Atlantic coasts. From the Gainesville reference point, Hague is about 8 miles away in a direct line.

What's Included

Every part of a new liner system

Flues proven with a test piece first
Water heater flues resized after a furnace swap
Flues swept before any liner goes in
Break-in steps written out for homeowners in Hague

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Trees over the chimney top

If trees hang over your roof in Hague, leaves and twigs can land on the liner's top plate and cap. A clogged cap screen chokes the draft, even through a new liner. Our specialists fit a cap sized to the liner and check the screen on every sweep, clearing anything that has collected. A hip-shaped cap lid sheds leaves better than a flat one.

How It Works

Relining day in Hague

Read the appliance

The rating plate and manual come first, then the flue is measured and inspected.
Sweep and prove the path

After a sweep, a test piece is run down the flue to confirm the liner will pass.
Wrap, feed and connect

The liner is insulated where needed, fed down, and connected at the bottom.
Seal the top, explain break-in

The top plate and cap go on, the draft is checked, and you get break-in steps.

Why Choose Us

Flues for inserts, fireplaces and gas appliances

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Local, family-run relining specialists who come back to sweep the liner in Hague.

Your price, upfrontThe liner, insulation and install are priced up front, before anything is ordered for Hague.
Our workmanship warrantyThe liner has its maker's warranty, and our workmanship warranty covers how we installed it.
Locally owned and operatedLocally owned, so the liner we install is one we can come back and sweep.

Call (352) 675-6366 Get a Free Inspection

Full-length liners for wood inserts

Smoke leaves a wood-burning insert through a collar at the top. Connecting that collar to a full-length liner, running to the top of the chimney, keeps the smoke in a flue sized for the insert instead of spreading into the large clay flue the fireplace had.

The smaller flue stays warmer, drafts better and collects less deposit. Our pros size the liner to the insert's collar and its instructions, fit the connection at the bottom and seal the top.

The insert's manual may also call for insulation on the liner, and that's included where it applies. Everything is priced before the insert goes in.

One appliance per flue

Gas appliance makers generally don't allow their vents to connect into a chimney flue serving a wood-burning appliance, and each appliance is meant to have its own flue. Sharing a flue between a fireplace and a furnace can send exhaust where it doesn't belong.

Which appliance uses which flue is the first thing to sort out. Where two appliances share one, our specialists plan separate liners, and in a large enough flue, two liners can run side by side.

Where there's no room for two, you'll hear the options, such as venting one appliance another way, with each priced. Every appliance's flue is labeled on the quote so it's clear which is which.

Relining after a chimney fire

A chimney fire can reach temperatures that crack clay tile along much of the flue, even when the fire itself was brief. Before the fireplace is used again, the flue needs a full inspection, and cracked tile means relining.

After checking the full height of the flue, the smoke chamber, the crown and the framing near the chimney, our specialists recommend a liner insulated to its listing, which also shields the masonry from the heat of the flue.

They'll tell you what caused the fire, from deposit to fuel, so the new liner isn't put through the same thing. A clean, well-fed fire is the best protection.

Free Inspection

Measured and checked before a liner is priced

Flue size at the top and its height from the appliance
Signs of condensation damage in flues that serve gas appliances
Sweeping needed before the liner can go in
Steps for breaking in the liner you choose

Claim 10% off your first service

A new liner, sized and insulated; first-time customers who reserve today claim a 10% discount.

Call (352) 675-6366 Get a Free Inspection

FAQs

Before relining in Hague, a few answers

How do you decide the liner size?

From the appliance. An insert's collar and manual set it, a gas appliance is sized from the gas code's tables and its instructions, and an open fireplace from the building code's ratio to its opening.

What happens to my damper?

For an insert, the damper is removed or fixed open as the insert's instructions say. For an open fireplace, the liner connects above it and the damper stays in use.

Our Services