Relining chimneys for homes in High Springs

Cracked tiles, a new insert or a furnace flue that's too big? Our family-run pros reline chimneys in High Springs, inspection free.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Getting ready for a home sale

Did the buyer's inspector flag the chimney liner? A cracked or missing liner can turn up on the buyer's report and hold up a closing.

Once the flue is inspected and the need confirmed, the relining is priced so you can decide how to handle it with the buyer. The work comes with our workmanship warranty and paperwork showing the liner's listing and size, which helps close the loop with the inspector. We can work to your closing date where the schedule allows. Speak with one of our local pros about relining before your sale in High Springs: (352) 675-6366.

In our service area, High Springs is grouped with Alachua County. According to the 2020 Census, 6,215 people lived in High Springs.

What's Included

Inside your chimney in High Springs, a new liner

Flues proven with a test piece first
Insulation wrapped to the liner's listing
Water heater flues resized after a furnace swap
Old aluminum liners checked against the appliance

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Standard 316L liners inland

At the top of a relined chimney in High Springs, salt isn't part of the picture. For wood appliances and standard gas appliances, a 316L stainless liner from the maker's regular line fits the job, and it lasts when it's kept clean and dry. Our pros match the alloy to the appliance rather than to the location, and they note it on the quote.

How It Works

Sizing starts with what you burn

Read the appliance

The rating plate and manual come first, then the flue is measured and inspected.
Sweep and prove the path

After a sweep, a test piece is run down the flue to confirm the liner will pass.
Wrap, feed and connect

The liner is insulated where needed, fed down, and connected at the bottom.
Seal the top, explain break-in

The top plate and cap go on, the draft is checked, and you get break-in steps.

Why Choose Us

Relining from a local family business

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Flues for gas appliances in High Springs are sized from the gas code's tables and the appliance instructions.

Your price, upfrontThe liner, insulation and install are priced up front, before anything is ordered for High Springs.
Our workmanship warrantyThe liner has its maker's warranty, and our workmanship warranty covers how we installed it.
Locally owned and operatedLocally owned, so the liner we install is one we can come back and sweep.

Call (352) 675-6366 Get a Free Inspection

Gas appliance liners, sized by table

Gas furnaces and water heaters are sized for venting by tables in the national fuel gas code, NFPA 54, along with each appliance's own instructions. Those tables weigh the appliance's input, the flue's height and the vent type.

For the same reason, the Florida Building Code points gas flue lining to its own fuel gas rules. Our specialists use those tables and the appliance manuals to pick a liner size, and they check that the liner metal suits the appliance.

An undersized liner can spill exhaust; an oversized one condenses it. Either way, the size chosen, and why, is written on the quote.

316L and AL29-4C stainless

Makers match the liner alloy to the exhaust. National Chimney's instructions, for example, list 316L stainless for wood, pellet, coal, oil and non-condensing gas appliances, and AL29-4C for high-efficiency gas units, whose cooler exhaust condenses and attacks metal harder.

Using 316L on a high-efficiency appliance shortens the liner's life. Using AL29-4C on a wood appliance isn't what it's listed for. Our pros read the appliance type before choosing and name the alloy on the quote.

If you might change appliances later, they'll mention which choice keeps your options open. The alloy also decides which cap and top plate go with the liner, and those are matched.

Break-in fires on a new liner

Some insulated liner systems call for reduced flue temperatures for a break-in period after installation. National Chimney's instructions, for instance, describe small to moderate fires in a fireplace for the first few hours of use.

The gentler start lets the insulation and joints settle. Our pros give you the break-in steps for your liner spelled out, with what to watch for during those first fires.

After that, the fireplace or insert is used as normal. Skipping the break-in may not cause trouble right away, but it's part of the maker's instructions and worth following. Our pros can answer questions on the phone during those first fires.

Free Inspection

Before relining in High Springs, a free look

Type of appliance, its rating plate and its venting instructions
Offsets, ledges and loose tile along the flue
Clearances around the chimney that decide whether insulation is needed
Steps for breaking in the liner you choose

Claim 10% off your first service

Booking your first relining today? Our family business takes 10% off it.

Call (352) 675-6366 Get a Free Inspection

FAQs

Liner questions from homeowners

Do you run the gas line on a conversion?

No, the gas line is a gas contractor's work. Our specialists handle the liner and venting, and your quote says who handles each part.

Is relining covered by a warranty?

You get our workmanship warranty on the installation, and the liner carries its maker's warranty under its terms. Reserve your free relining inspection in High Springs at (352) 675-6366.

Our Services