Stainless liners fitted in Lake Butler, FL

Liners for open fireplaces, wood inserts and gas appliance flues, fitted in Lake Butler after your free inspection.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Two appliances, two flues

Does your chimney serve a fireplace and a furnace or water heater? Each appliance needs its own flue, and gas appliances generally can't share a flue with a wood-burning one. If the chimney has only one flue for two appliances, that's a problem worth fixing.

Each appliance's venting is weighed against its flue, and our pros plan a liner for each one that needs it. In some chimneys, two liners fit side by side in a large flue. You'll see the plan and the prices for each. Reserve a flue check for a chimney with two appliances in Lake Butler by dialing (352) 675-6366.

Neither the Gulf nor Atlantic coast reaches Lake Butler. Lake Butler is where you'll find Union County Courthouse.

What's Included

Every part of a new liner system

Each liner matched to the appliance below it
Tees and cleanout caps at the base
Liners run through offsets without kinking
Oval liners sized with enough area

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Selling a home with a relined chimney

Buyers' inspectors in Lake Butler look for the liner, and a relined chimney with paperwork showing the liner's make, size and listing answers their questions quickly. Our specialists give you that record with every install, along with the date and the insulation used. It also helps the next inspector see what was done, and when, without guessing about the flue. The record stays with the house.

How It Works

Relining day in Lake Butler

Read the appliance

The rating plate and manual come first, then the flue is measured and inspected.
Sweep and prove the path

After a sweep, a test piece is run down the flue to confirm the liner will pass.
Wrap, feed and connect

The liner is insulated where needed, fed down, and connected at the bottom.
Seal the top, explain break-in

The top plate and cap go on, the draft is checked, and you get break-in steps.

Why Choose Us

Flues for inserts, fireplaces and gas appliances

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Insulation goes on exactly as the liner's listing calls for, named on your quote.

Your price, upfrontThe liner, insulation and install are priced up front, before anything is ordered for Lake Butler.
Our workmanship warrantyThe liner has its maker's warranty, and our workmanship warranty covers how we installed it.
Locally owned and operatedLocally owned, so the liner we install is one we can come back and sweep.

Call (352) 675-6366 Get a Free Inspection

The catch with oval liners

When a round liner is too big for a narrow rectangular flue, it can be pressed into an oval. But ovalizing changes the liner's area, and a liner that has lost too much area can't carry the appliance's exhaust.

Liner makers publish how much ovalizing their product allows. Our pros compare the oval size against the appliance's needs before choosing it. If an oval won't keep enough area, the options include a smaller appliance or removing the old tile to make room for a round liner.

You'll see the sizes and the reasoning on the quote, and no liner is forced into a flue that can't take it.

Keeping a stainless liner clean

A stainless liner still needs care after installation. Keep its instructions so future cleaning can use a head and method suited to that liner; brush material alone does not establish that a tool is suitable.

That's the brush our pros use on stainless, and they empty the tee cap at the bottom where there is one. Yearly sweeping and dry fuel are the two biggest things you can do to make the liner last, since deposit and moisture shorten its life.

The liner's make and size are on your quote, so the right brush comes on every future sweep. A dry, clean liner lasts longest.

What relining does to the damper

On an insert installation, the liner runs through the damper opening to the insert's outlet. The old throat damper is either removed or fixed open, depending on the insert's instructions, since the insert has its own controls.

On an open fireplace, the liner connects above the damper, and the damper stays in use. If it's rusted or warped, it's repaired or replaced as part of the job.

On setups where the throat damper is gone, a sealing damper at the top plate can close the liner between fires. Our pros explain which applies to yours and price each part. Each part is listed.

Free Inspection

Measured and checked before a liner is priced

Signs of condensation damage in flues that serve gas appliances
Which appliances share which flues in the chimney
Any existing aluminum liner and whether it still suits
Sweeping needed before the liner can go in

Claim 10% off your first service

Relining for the first time with our pros? Arrange a visit and it's 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Before relining in Lake Butler, a few answers

Does my liner need insulation?

Where the chimney's clearance to combustibles can't be confirmed, liner makers require it, and it also helps the draft. Our pros follow the liner's listing and name the insulation on your quote.

Do you run the gas line on a conversion?

No, the gas line is a gas contractor's work. Our specialists handle the liner and venting, and your quote says who handles each part.

Our Services