Stainless liners fitted in Lawtey, FL

Relining after a chimney fire or a failed inspection? Book a free inspection in Lawtey and see the options written out.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Liner install day at your house

Curious how the liner goes in? After protecting the room and the roof, our pros sweep the flue if needed and clear the path. The liner, wrapped in its insulation if it has any, is fed down from the top with a guide cone leading it.

At the bottom, it's connected to the appliance or the fireplace, and a tee with a cap is fitted where the liner calls for one. At the top, a plate seals the flue opening, the liner is clamped, and a cap goes on. Before leaving, they check the draft and explain the break-in fires. Ask our specialists about install day in Lawtey at (352) 675-6366.

We cover Lawtey along with the rest of our Bradford County area. In 2020, the Census Bureau counted 636 people living in Lawtey.

What's Included

Liner, insulation, connector and top plate

Flues proven with a test piece first
Top plates sealed and caps fitted
Liner make and listing recorded for homes in Lawtey
Break-in steps written out for homeowners in Lawtey

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Liners behind a working insert

A wood insert that heats a home in Lawtey runs hot and long, and its liner has to be sized and insulated to its instructions to draft well through those fires. Our specialists connect the insert to a full-length liner, insulate it where the listing calls for it, and set up the tee or connection so it's easy to sweep.

How It Works

Test piece first, then the full liner in Lawtey

Read the appliance

The rating plate and manual come first, then the flue is measured and inspected.
Sweep and prove the path

After a sweep, a test piece is run down the flue to confirm the liner will pass.
Wrap, feed and connect

The liner is insulated where needed, fed down, and connected at the bottom.
Seal the top, explain break-in

The top plate and cap go on, the draft is checked, and you get break-in steps.

Why Choose Us

Chimney liners sized right in Lawtey

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Local, family-run relining specialists who come back to sweep the liner in Lawtey.

Your price, upfrontThe liner, insulation and install are priced up front, before anything is ordered for Lawtey.
Our workmanship warrantyThe liner has its maker's warranty, and our workmanship warranty covers how we installed it.
Locally owned and operatedLocally owned, so the liner we install is one we can come back and sweep.

Call (352) 675-6366 Get a Free Inspection

Flexible liners and offsets

Plenty of chimneys don't rise straight. An offset, where the flue shifts sideways partway up, blocks a rigid liner. Corrugated flexible stainless liners are made to bend through those offsets and take up expansion as they heat, while keeping their round shape.

Offsets show up while measuring, and the liner chosen has to pass them. Our pros feed the liner down slowly with a pulling cone, guiding it around the bend without kinking it.

A kinked or crushed liner loses area and won't draft properly, so they check its shape at the offset before connecting anything below. The liner is marked where it passes the bend.

What cracked tiles let through

Clay flue tiles keep heat, smoke and moisture inside the flue. When they crack, shift or lose their joints, heat reaches the brick around them, smoke finds its way into the masonry, and in some chimneys it can reach framing nearby.

Tiles crack from chimney fires, from years of heating and cooling, and from settling. Once they're broken, they can't be patched from the inside in a way that lasts.

Our specialists recommend relining with a continuous stainless liner that doesn't depend on the old tile, and until that's done, the fireplace stays out of use. The reason is written on your quote.

The inspection before relining

NFPA 211 calls for a closer inspection before a chimney is relined, and it makes sense. The flue has to be checked along its length, the smoke chamber and crown looked at, and the clearances around the chimney considered, since they decide whether insulation is needed.

Our specialists do that inspection as part of the relining quote. It's also when they confirm the relining is the right fix, and not something else, like a crown or cap problem letting water in.

You'll get the findings noted on the quote along with the liner plan and its price. It's also when water problems at the crown or cap get spotted, so they're fixed before the new liner goes in.

Free Inspection

The free relining inspection, flue first

Flue size at the top and its height from the appliance
Clearances around the chimney that decide whether insulation is needed
Crown and flue top where the liner's top plate will sit
Damper condition and what the new setup needs

Claim 10% off your first service

A new liner, sized and insulated; first-time customers who reserve today claim a 10% discount.

Call (352) 675-6366 Get a Free Inspection

FAQs

Relining, answered in short

How do you decide the liner size?

From the appliance. An insert's collar and manual set it, a gas appliance is sized from the gas code's tables and its instructions, and an open fireplace from the building code's ratio to its opening.

Can a liner go through a bent flue?

A flexible stainless liner can pass most offsets. Our specialists prove the path with a test piece first, so you'll know before anything is ordered.

Our Services