Chimney liner installation around Rochelle, FL

Liners for open fireplaces, wood inserts and gas appliance flues, fitted in Rochelle after your free inspection.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Your appliance decides the liner

Wondering which liner your chimney needs? Start with what's burning below it. An open wood fireplace, a wood-burning insert, and a furnace or water heater that burns gas all need different liners, sized and made from different metals, and each appliance's instructions set the rules.

So the appliance comes first: its listing and manual get read, then the flue is measured to match. You'll see the liner type, the alloy, the size and whether it needs insulation, all given its own price before anything is ordered. Ask a local pro about the right liner for your chimney in Rochelle by phoning (352) 675-6366.

A straight line from the Gainesville reference point to Rochelle runs about 10 miles. Rochelle is on our Alachua County list of places we serve.

What's Included

Liner, insulation, connector and top plate

Flues proven with a test piece first
Liners run through offsets without kinking
Wood inserts connected to full-length liners
Liner make and listing recorded for homes in Rochelle

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Standard 316L liners inland

At the top of a relined chimney in Rochelle, salt isn't part of the picture. For wood appliances and standard gas appliances, a 316L stainless liner from the maker's regular line fits the job, and it lasts when it's kept clean and dry. Our pros match the alloy to the appliance rather than to the location, and they note it on the quote.

How It Works

Test piece first, then the full liner in Rochelle

Read the appliance

The rating plate and manual come first, then the flue is measured and inspected.
Sweep and prove the path

After a sweep, a test piece is run down the flue to confirm the liner will pass.
Wrap, feed and connect

The liner is insulated where needed, fed down, and connected at the bottom.
Seal the top, explain break-in

The top plate and cap go on, the draft is checked, and you get break-in steps.

Why Choose Us

Chimney liners sized right in Rochelle

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

The gas line on a conversion is a gas contractor's work, and your quote says who does it.

Your price, upfrontThe liner, insulation and install are priced up front, before anything is ordered for Rochelle.
Our workmanship warrantyThe liner has its maker's warranty, and our workmanship warranty covers how we installed it.
Locally owned and operatedLocally owned, so the liner we install is one we can come back and sweep.

Call (352) 675-6366 Get a Free Inspection

Cleaning the flue before relining

Liner makers ask for a swept flue and a clean smoke chamber before their product is fitted. Deposit left behind a new liner can keep smoldering, and an unswept flue hides the loose tile and ledges that decide the install.

So the sweep comes first, then the smoke chamber is scraped and anything loose is pulled from the old flue. Then our pros measure and prove the path on a clean flue.

The sweep is part of the relining plan and priced on its own line. If heavy glaze is found, removing it may be a separate step, and you'll hear about it before the liner is ordered.

What cracked tiles let through

Clay flue tiles keep heat, smoke and moisture inside the flue. When they crack, shift or lose their joints, heat reaches the brick around them, smoke finds its way into the masonry, and in some chimneys it can reach framing nearby.

Tiles crack from chimney fires, from years of heating and cooling, and from settling. Once they're broken, they can't be patched from the inside in a way that lasts.

Our specialists recommend relining with a continuous stainless liner that doesn't depend on the old tile, and until that's done, the fireplace stays out of use. The reason is written on your quote.

Listed liner systems

The Florida Building Code accepts listed chimney lining systems, tested to UL 1777, as a flue lining for masonry chimneys. The listing covers the liner, its fittings and the way it's installed, including clearances and insulation.

Liners from our pros go in as complete listed systems, following the maker's instructions for each part, from the top plate and cap to the tee and connector. Mixing parts from different makers, or skipping the insulation the listing calls for, breaks the listing.

The make and listing go on your quote, so future inspectors can see what was installed. That record also helps when you sell the house.

Free Inspection

The free relining inspection, flue first

Type of appliance, its rating plate and its venting instructions
Which appliances share which flues in the chimney
Damper condition and what the new setup needs
Steps for breaking in the liner you choose

Claim 10% off your first service

A new liner, sized and insulated; first-time customers who reserve today claim a 10% discount.

Call (352) 675-6366 Get a Free Inspection

FAQs

Relining, answered in short

Can a liner go through a bent flue?

A flexible stainless liner can pass most offsets. Our specialists prove the path with a test piece first, so you'll know before anything is ordered.

What happens to my damper?

For an insert, the damper is removed or fixed open as the insert's instructions say. For an open fireplace, the liner connects above it and the damper stays in use.

Our Services