Masonry work on chimneys across Starke, FL

Old patches that don't match? Get brick and mortar blended in properly in Starke, after the free look.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Cracks on the chimney breast inside

Noticed cracks in the brick or plaster above the fireplace indoors? Sometimes they're cosmetic, from the house settling over the years. Sometimes they follow a problem in the chimney, like a sagging lintel over the fireplace opening or masonry moving as it gets wet and dries.

The crack's pattern, the lintel, the firebox and the chimney outside together tell our pros what's behind it. Cosmetic cracks get repointed or patched to match. Structural ones are traced to the cause first. Prices come on a written quote either way. Ask one of our local pros about the cracks on your chimney breast in Starke at (352) 675-6366.

Measured directly, about 23 miles separate Starke from the Gainesville reference point. Starke falls in the Bradford County part of our service area.

What's Included

Mortar, brick and stone repairs in Starke

Loose bricks at the top lifted off and reset
Rusting lintels cleaned, coated or replaced
Brick cleaned without harsh acids
Work covered against rain at the end of each day

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Pressure washers and soft mortar

A pressure washer aimed at a house in Starke can blast soft mortar out of chimney joints and scar the brick faces. The Brick Industry Association suggests checking with the brick maker before pressurized water cleaning.

If the joints look hollow after a wash, our pros repoint the damaged sections and match the mortar color. Gentler cleaning methods keep the joints intact next time the house is washed.

Our Process

Repointing your chimney in Starke

Find which half failed

Every face is looked over for worn joints, damaged brick and cracks, and the cause is found.
Match mortar and brick

Samples are mixed and cured, and replacement brick is matched and shown to you.
Joints raked, then refilled

Joints are raked to sound depth, repointed in layers, and damaged brick is swapped out.
Cover, clean, cure

The work is covered against rain, the site cleaned, and you get curing time spelled out.

Why Choose Us

Brick, mortar and stone, done properly

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Work is covered against rain every evening, and the site in Starke is cleaned daily.

100% satisfaction, guaranteedIf the repair doesn't blend in or hold, we make it right. That's our 100% satisfaction guarantee.
Your price, upfrontMasonry work in Starke is priced by section up front, so you can choose what gets done.
Locally owned and operatedA locally owned business, so the masons who repointed your chimney are easy to reach later.

Call (352) 675-6366 Get a Free Inspection

How a joint is tooled matters

The shape of a finished mortar joint changes how it handles rain. The Brick Industry Association's guidance on water penetration favors tooled concave and V joints for exterior brick, since tooling compacts the mortar surface and the shape sheds water.

A recessed or struck joint leaves a little shelf where water sits against the brick. On a chimney, where every joint is exposed, that difference adds up. Our pros tool new joints to a water-shedding profile that matches the existing look as closely as possible, and they'll talk it through with you if the old joints were a shape that holds water.

Tying a chimney to the house

Where a chimney is built against a house wall, it's meant to be tied to the structure. The Brick Industry Association describes attaching single-wythe chimneys to the framing with corrosion-resistant metal ties at regular spacing up the height.

Missing, rusted or broken ties let the chimney pull away from the house, which shows as a widening gap at the wall or a stepped crack. Our pros check the gap and, where the chimney is still sound, can add or replace ties with corrosion-resistant anchors. A chimney that has moved a long way may need partial rebuilding instead. The gap at the wall is measured before and after.

When repair becomes rebuilding

Masonry repair has a limit. When the mortar has failed through the full depth of the wall across several courses, when bricks are loose throughout the top section, or when the chimney has shifted, repointing and spot replacement only postpone a bigger job.

At that point, our specialists recommend taking the chimney down to sound masonry and relaying it, which tends to mean just above the roofline. They'll show you why, price the rebuild next to the best repair option, and let you compare. Sometimes the repair is still worth doing to buy time, and they'll say so. You make the call, with both prices in front of you.

Free Inspection

Soft joints and spalled brick, found and priced

Brick faces that are flaking, cracked or crumbling
Earlier patches made with hard or mismatched mortar
Gap or cracking where the chimney meets the house wall
Prices section by section, with repair and rebuild compared where both fit

Claim 10% off your first service

Reserve your first brick or mortar repair today and claim 10% off it.

Call (352) 675-6366 Get a Free Inspection

FAQs

Common masonry questions in Starke

Who handles chimney masonry repair in Starke?

Our pros do. Starke is inside our Bradford County coverage, and each face of the chimney gets checked for free before any repair is priced. Soft joints or flaking brick are worth mentioning on the phone.

Do you repair stone chimneys?

Yes. Natural stone is repointed with a mortar softer than the stone, and manufactured stone veneer is repaired following the maker's installation guide.

Our Services