Brick soaking up rain in Cross Creek? Ask our pros

Brick drinking in rain? Our family-run pros test it on your free inspection in Cross Creek before recommending a repellent.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Painted or glazed brick

Is your chimney painted, or built with glazed brick? Penetrating repellents are made for bare, porous masonry. They can't soak through paint or a glazed face, so they won't help there.

Nothing gets recommended until it's clear what's on your chimney. On painted brick, the finish itself and what's happening under it matter more, and a breathable masonry coating may be the better choice. On glazed brick, the joints are where water gets in, so repointing is the fix. You'll hear which applies before any work is priced. Chat with a local pro about your chimney's finish in Cross Creek by dialing (352) 675-6366.

Cross Creek lies inland from the Gulf and Atlantic coasts. Cross Creek is where you'll find Marjorie Kinnan Rawlings Historic State Park.

What's Included

What a waterproofing visit covers in Cross Creek

Breathable repellent applied bottom up
Test patches checked before the full coat
Glass, trim and plants masked and covered
Stone chimneys tested before treating

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Sun on a freshly treated chimney

Some chimney repellents react with moisture and sunlight as they cure, and most have a temperature range for application. On a chimney in Cross Creek in full sun, that can mean working the shaded face in the morning and the sunny face later. Our specialists follow the maker's data sheet for your product, so the coat cures properly instead of flashing off a hot surface.

Our Process

Gaps closed before any repellent goes on

Close the gaps

Crown, cap, flashing and joints are repaired first, since a repellent can't seal them.
Test the brick

Absorption is measured on each face and a test patch is checked with you.
Mask and apply

Glass and trim are masked, and the repellent goes on bottom up on dry brick.
Record and recheck

You get the product, faces and date written out, and we check beading on later visits.

Why Choose Us

We test the brick before sealing it

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Our specialists will say so when a chimney in Cross Creek doesn't need waterproofing.

Free inspection firstA brick absorption test is part of the free inspection, so you know if waterproofing is worth it.
No hidden fees, all upfrontNo hidden fees on waterproofing in Cross Creek; masking, testing and cleanup are in the price.
Family owned and runWe're family owned, and we'll tell you when your chimney doesn't need a coating.

Call (352) 675-6366 Get a Free Inspection

Breathable repellents, explained

A breathable, or vapor-permeable, repellent soaks into the brick and lines the walls of its pores instead of forming a skin on top. Liquid water beads on the surface and runs off, while water vapor from inside the wall can still pass out through the pores.

That balance is what a chimney needs, since some moisture gets in from the top, the flue and the air on any chimney. Our pros use penetrating repellents made for masonry and chimneys, and they name the product on your quote. Afterwards the brick looks much the same, with water beading on it. That's the look you'll see on the test patch.

Dry brick and a dry forecast

The selected repellent's data sheet sets its application conditions. Air and masonry temperature, surface moisture, curing time and the rain forecast all matter. A waiting period from a different product should not be substituted for those instructions.

Surface moisture requirements vary by product. Our pros check the selected instructions rather than assuming every repellent needs the same dry surface or rain-free interval. If the wall or forecast does not meet those requirements, application is rescheduled and the revised timing is explained.

Keeping a record of the treatment

Repellent coats wear gradually, and it's easy to forget when it went on and which product was used. Our pros write both on your quote, along with the faces treated and the maker's guidance on checking and reapplying.

That record helps at the next visit, when they check the beading and decide if a face needs another coat. It also helps if you sell the house, since a buyer's inspector may ask what's on the brick. Using the same product or a compatible one for recoating avoids problems with layers that don't bond to each other. It's a small step that saves guesswork later.

Free Inspection

Each face of the brick, tested free

White bloom or salt deposits, and where the water behind them comes from
Windows, trim, roofing and plants that need masking
Cure time left on any recent repointing or new brick
Product choice, number of coats and the maker's weather window

Claim 10% off your first service

New to our family business? Arrange a visit and your first chimney waterproofing is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Does brick need sealing at all?

Is Cross Creek somewhere you waterproof chimneys?

Yes, Cross Creek is in our service area. Our pros run an absorption test on your free inspection, since the brick decides whether a repellent is worth it. Damp brick or white bloom are good things to mention up front.

How will I know when it needs another coat?

Watch the brick after rain. Beading means it's working; brick that darkens and soaks up water means the repellent has worn thin on that face. Our pros check it on every visit.

Our Services