Chimney waterproofing around Haile Plantation, FL

Cracks sealed, joints repointed, then the repellent. Local chimney waterproofing in Haile Plantation after the free look.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Crown sealing is a separate job

Want the whole chimney top waterproofed? The crown takes a different product from the brick. Brick gets a penetrating repellent that lets it breathe; a concrete crown gets a flexible coating that forms a waterproof membrane over hairline cracks.

Our specialists seal the crown and treat the brick as two steps, each with the right material and each priced on its own line. Putting a brick repellent on a cracked crown won't stop water, and putting a crown coating on brick would trap moisture. Reserve crown sealing and brick waterproofing together in Haile Plantation at (352) 675-6366.

A straight line from the Gainesville reference point to Haile Plantation runs about 7 miles. Haile Plantation is on our Alachua County list of places we serve.

What's Included

Repairs, test patch and final coat

Entry points repaired before any repellent
Cure times respected after repointing
Treated faces recorded for homes in Haile Plantation
Product and date recorded for the warranty in Haile Plantation

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Pressure washing before sealing

Thinking of pressure washing the chimney in Haile Plantation before it's sealed? That can blast mortar from the joints and leave the brick soaked for days. The Brick Industry Association advises checking with the brick maker before pressurized cleaning. Our specialists clean brick gently before treatment and repoint anything a past wash has damaged, then wait for the wall to dry.

Our Process

Repairs, a test patch, then the repellent

Close the gaps

Crown, cap, flashing and joints are repaired first, since a repellent can't seal them.
Test the brick

Absorption is measured on each face and a test patch is checked with you.
Mask and apply

Glass and trim are masked, and the repellent goes on bottom up on dry brick.
Record and recheck

You get the product, faces and date written out, and we check beading on later visits.

Why Choose Us

Breathable chimney protection in Haile Plantation

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Repairs come first, so the repellent isn't asked to do a job it can't do in Haile Plantation.

Free inspection firstA brick absorption test is part of the free inspection, so you know if waterproofing is worth it.
No hidden fees, all upfrontNo hidden fees on waterproofing in Haile Plantation; masking, testing and cleanup are in the price.
Family owned and runWe're family owned, and we'll tell you when your chimney doesn't need a coating.

Call (352) 675-6366 Get a Free Inspection

Silanes and siloxanes

Most penetrating masonry repellents are silanes, siloxanes or a blend. The Brick Industry Association describes silanes as smaller molecules that penetrate deeply and need alkaline conditions to react, and siloxanes as larger molecules that bond well with the silica and alumina in brick.

Maker products blend and modify them for particular uses, and chimney repellents are formulated for the heat and moisture a chimney sees. Our specialists choose the product for your brick, test it on a patch, and apply it by the maker's data sheet. The chemistry matters less to you than the result: brick that sheds rain and still breathes.

Measuring how thirsty the brick is

A RILEM or Karsten tube is a little marked glass cylinder that gets sealed to the brick face and filled with water. The level drops as the brick absorbs it, and timing that drop gives a simple measure of how much water the face is taking in.

A few spots on each face get tested and compared, and the results decide which faces need a repellent. A face that barely absorbs anything doesn't need treating. Testing again after application shows the repellent is working. It's quick, it's done on the free inspection, and it takes the guesswork out.

Keeping repellent off glass and trim

The same chemistry that bonds a repellent to brick can bond it to glass. The Brick Industry Association notes silanes and siloxanes bond with unprotected glass, and once cured, the film is hard to remove.

Our pros mask windows, skylights and painted trim near the chimney before starting, cover plants and the roofing below, and check for overspray as they go. Anything that gets splashed is wiped right away, before it cures. It takes time to set up, and it's included in every waterproofing job, so there's nothing extra to arrange. Masking comes off only after the repellent has had its initial cure.

Free Inspection

A free absorption test in Haile Plantation

White bloom or salt deposits, and where the water behind them comes from
Weather side and sheltered faces compared for exposure
Product choice, number of coats and the maker's weather window
A test patch location on a less visible face

Claim 10% off your first service

Breathable protection for chimney brick in Haile Plantation, and 10% off when you book today.

Call (352) 675-6366 Get a Free Inspection

FAQs

Repellents and sealers, answered

Can a repellent cure a chimney that leaks?

Only if the leak is water soaking through porous brick. Leaks through a cracked crown, missing cap, flashing or open joints need those repairs, and our pros fix them first.

Why not use a clear sealer from the store?

Many are film-forming sealers that slow the brick's drying and trap water and salts. Our specialists use breathable, penetrating repellents made for chimney masonry instead.

Our Services