Waterproofing chimneys for homes in Spring Ridge

Brick drinking in rain? Our family-run pros test it on your free inspection in Spring Ridge before recommending a repellent.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Stone chimneys and waterproofing

Have a natural stone chimney? Many stones absorb very little water, and the joints between them are where rain tends to get in. Sealing the stone faces may do nothing for a leak coming through worn mortar.

So the joints come first, repointed where they've worn. If the stone itself is porous, our specialists test it and recommend a repellent suited to that stone. Manufactured stone veneer follows its maker's guidance on coatings. You'll hear what fits your chimney before any product is chosen. Veneer gets the same care, following its own rules. Ask about waterproofing a stone chimney in Spring Ridge by phoning (352) 675-6366.

Spring Ridge recorded a population of 442 in the 2020 Census. Spring Ridge is an inland service location, separate from the sea coast.

What's Included

What a waterproofing visit covers in Spring Ridge

Entry points repaired before any repellent
Old film sealers identified before choosing a product
Stone chimneys tested before treating
Beading checked on follow-up visits

Call (352) 675-6366 Get a Free Inspection

Local Conditions

The face that takes the storms

On a chimney in Spring Ridge, one face takes most of the wind-driven rain in a storm, while the others stay much drier. That face absorbs the most and wears a repellent first. Our pros test each face and may recommend treating only the weather face, which saves money and keeps the sheltered faces breathing freely. The faces treated are marked on the quote, so the next check knows where to look.

Our Process

Gaps closed before any repellent goes on

Close the gaps

Crown, cap, flashing and joints are repaired first, since a repellent can't seal them.
Test the brick

Absorption is measured on each face and a test patch is checked with you.
Mask and apply

Glass and trim are masked, and the repellent goes on bottom up on dry brick.
Record and recheck

You get the product, faces and date written out, and we check beading on later visits.

Why Choose Us

We test the brick before sealing it

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Waiting times and the forecast are respected, even when that means holding off a few days.

Free inspection firstA brick absorption test is part of the free inspection, so you know if waterproofing is worth it.
No hidden fees, all upfrontNo hidden fees on waterproofing in Spring Ridge; masking, testing and cleanup are in the price.
Family owned and runWe're family owned, and we'll tell you when your chimney doesn't need a coating.

Call (352) 675-6366 Get a Free Inspection

How the repellent is applied

Wet and generous is how a penetrating repellent goes on. Makers such as SaverSystems describe a low-pressure flood coat applied from the bottom of the wall upward, so the brick takes in what it can and the excess runs down onto brick that's still being treated.

Working one face at a time, our pros follow the maker's instructions for the product used and watch for runs and missed spots. They don't mist it on with a high-pressure sprayer, which wastes product and drifts onto glass and plants. The result is an even coat that the brick absorbs fully. The number of coats goes on the quote.

Surfaces a repellent can't help

Paint, glaze or an earlier sealer can change how a proposed treatment interacts with brick. The surface needs identifying before product selection; a repellent intended for bare porous masonry cannot simply be assumed suitable for a coated wall.

Tell us about previous painting or sealing if you know when it was done. Existing finishes and the condition of the joints can change the recommendation. The estimate should explain the work proposed for that surface and any testing needed, rather than treating a new coating as the answer to every leak.

Treating only the faces that need it

Four faces on a chimney means four different doses of weather. The face turned toward the prevailing storms gets the most wind-driven rain and absorbs the most water; a sheltered face may barely get wet.

A repellent is recommended only on faces where the absorption tests high. Treating one or two faces instead of all four saves you money, and it keeps the sheltered faces as breathable as they were. The treated faces are marked on your quote, so you know where to check the beading and what to recoat later. A face treated later can use the same product.

Free Inspection

Each face of the brick, tested free

Absorption of the brick, tested with a tube on each face
Any old sealer, paint or film on the brick surface
White bloom or salt deposits, and where the water behind them comes from
Windows, trim, roofing and plants that need masking

Claim 10% off your first service

Keep the brick dry in Spring Ridge with a 10% discount on a first job.

Call (352) 675-6366 Get a Free Inspection

FAQs

Does brick need sealing at all?

How soon after repointing can you waterproof?

At least 72 hours after repointing, per the Brick Industry Association and the repellent maker, and longer for new masonry. Our pros write the date on your quote.

How will I know when it needs another coat?

Watch the brick after rain. Beading means it's working; brick that darkens and soaks up water means the repellent has worn thin on that face. Our pros check it on every visit.

Our Services