Fireplace installation around Spring Ridge, FL

Installed to the maker's instructions and the building code, with a free look first and a firm price for your home in Spring Ridge.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Who does what on a fireplace install

Several trades can touch a fireplace install. Our pros handle the fireplace, its chimney or vent, the hearth, and the fit to the framing. A gas contractor runs any gas line. Any new circuit is an electrician's job. A roofer weathers in the roofing around a new chimney where needed. Drywall, tile and paint may belong to other trades.

Each part and who does it goes on your quote, and our specialists coordinate the order so the job moves smoothly. Nothing is left in the gaps. Chat with a local pro about planning your fireplace install in Spring Ridge by dialing (352) 675-6366.

Spring Ridge is on our Gilchrist County list of places we serve. When the 2020 Census counted Spring Ridge, it found 442 residents.

What's Included

Wood, gas and electric, planned and fitted

Electric fireplaces mounted, recessed or inserted
Chimney routes planned through attics and roofs
Hearth extensions sized to the unit's listing
Installs in Spring Ridge under our workmanship warranty

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Rooms with a TV wall

Want the fireplace and the TV on the same wall in Spring Ridge? Some units are made for that, with the heat directed away from the wall above. Our pros check the clearance chart of each unit you like and recommend ones that suit a TV above, before the wall is framed. The mantel height is planned from the same chart.

Our Process

Planning to first fire

Look at the room

The wall, floor, attic and roof are looked at, then the fireplace options that fit are laid out.
Plan and price

You choose a unit, and the quote lists every part, trade, permit and inspection.
Install and check

The unit and its chimney or vent go in to the manual, with clearances checked before walls close.
Test and hand over

The unit is tested, you're shown how to use it, and you get the break-in steps noted on the quote.

Why Choose Us

Fireplaces installed to the listing in Spring Ridge

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

The quote names the trade for gas lines, circuits and roofing.

Your written price is freeEach fireplace option for your room is given its own price, free and side by side.
Family owned and runFamily-run planning for your fireplace in Spring Ridge, as careful as if it were going in our own home.
100% satisfaction, guaranteedThe install isn't done until you're happy with it. That's our 100% satisfaction guarantee.

Call (352) 675-6366 Get a Free Inspection

How deep a masonry firebox has to be

Firebox proportions depend on the fireplace design. Standard masonry and Rumford-style arrangements have different requirements, and depth must be considered with the opening, throat and flue. Our pros discuss the proposed design before choosing dimensions or pricing the masonry.

Opening size, depth, throat and flue need to be planned together. Our pros explain the proposed arrangement and any questions that must be resolved before construction, rather than promising draft performance from a single dimension.

A Rumford-style fireplace has its own proportions and may be worth discussing where that design suits the project. Its appearance, construction and venting requirements belong in the planning conversation before it is compared with a standard masonry fireplace.

Planning a gas fireplace

Three things get planned together for a gas fireplace: where it sits, how it vents and where the gas comes from. Direct-vent units draw air from outside and send exhaust out through a sealed pipe, through the wall or the roof, as the maker's vent tables allow.

The gas line to the unit is a gas contractor's work, sized and run to the gas code, and our quote names who does it.

The unit, the venting and the framing follow the maker's installation manual, and our pros coordinate the timing with the gas contractor so the line is ready when the unit goes in.

Facing and mantel clearances

The materials around a fireplace opening have rules. On a factory-built unit, the maker's clearance chart sets how close combustible trim and mantels can sit and how far they can project. For a masonry fireplace, the building code sets those limits.

The chart for your unit gets read before the wall is framed and the mantel height is chosen, so the finish work fits the rules from the start and nothing has to be torn out later.

Noncombustible facing is used where the manual or code calls for it. The mantel itself and the finish carpentry are named on the quote with the trade that handles them.

Free Inspection

On your free planning visit

Floor framing or slab under the unit and hearth
Existing fireplace and chimney, with the old rating plate
Roof type and where the chimney would leave it
Each fireplace option that fits, priced side by side

Claim 10% off your first service

Planning a fireplace in Spring Ridge? Book your first install today for 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Fireplace installs, the short version

Will the new fireplace need a permit?

Generally yes, and the local building department inspects the framing and the finished install. Our pros put on the quote who pulls the permit and whether the fee is included.

Can you replace my old factory-built fireplace?

We can. The old rating plate shows what you have, the maker's current line shows what's offered, and our pros plan a replacement that's listed with its chimney. Talk to us about your replacement in Spring Ridge at (352) 675-6366.

Our Services