Your chimney brick kept dry in Waldo, FL

We'll tell you if your chimney in Waldo really needs waterproofing, and the inspection's on us either way.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Checking that it's still working

How do you know the repellent is still doing its job? Watch the brick after rain. Water beading and running off means it's working. Brick that darkens and soaks up water evenly means it has worn thin on that face.

On any visit to the chimney, a beading check tells you when a face is due for another coat. Repellents wear faster where the sun and rain hit hardest, so the weather side may need it sooner. Reapplication follows the maker's advice for the product used. Reserve a waterproofing check for your chimney in Waldo by dialing (352) 675-6366.

Waldo recorded a population of 846 in the 2020 Census. Waldo is an inland service location, separate from the sea coast.

What's Included

What a waterproofing visit covers in Waldo

Entry points repaired before any repellent
Brick absorption tested face by face
Breathable repellent applied bottom up
Stone chimneys tested before treating

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Natural stone and veneer faces

A stone chimney in Waldo may need little or no repellent, since many stones absorb very little water and the joints carry most of it. Our pros test the stone and check the joints first. Veneer follows its maker's coating guidance, and the plan for your chimney is written on the quote. Some stone chimneys need nothing at all once the joints are repointed.

Our Process

Gaps closed before any repellent goes on

Close the gaps

Crown, cap, flashing and joints are repaired first, since a repellent can't seal them.
Test the brick

Absorption is measured on each face and a test patch is checked with you.
Mask and apply

Glass and trim are masked, and the repellent goes on bottom up on dry brick.
Record and recheck

You get the product, faces and date written out, and we check beading on later visits.

Why Choose Us

We test the brick before sealing it

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

You check a test patch with our pros before the full coat goes on your chimney in Waldo.

Free inspection firstA brick absorption test is part of the free inspection, so you know if waterproofing is worth it.
No hidden fees, all upfrontNo hidden fees on waterproofing in Waldo; masking, testing and cleanup are in the price.
Family owned and runWe're family owned, and we'll tell you when your chimney doesn't need a coating.

Call (352) 675-6366 Get a Free Inspection

Why new brickwork waits longer

New masonry carries moisture from construction, and as it dries for the first time, white salt bloom can come out on the face. The Brick Industry Association suggests at least a month after the structure is enclosed before a repellent goes on, and ideally a full year for new brickwork.

Sealing too soon can hold that construction moisture in the wall. On a rebuilt chimney, our pros fit the cap and seal the crown right away, since those keep the worst water out, and leave the brick to dry naturally before any repellent is considered. You'll get a suggested date on your quote.

Keeping repellent off glass and trim

The same chemistry that bonds a repellent to brick can bond it to glass. The Brick Industry Association notes silanes and siloxanes bond with unprotected glass, and once cured, the film is hard to remove.

Our pros mask windows, skylights and painted trim near the chimney before starting, cover plants and the roofing below, and check for overspray as they go. Anything that gets splashed is wiped right away, before it cures. It takes time to set up, and it's included in every waterproofing job, so there's nothing extra to arrange. Masking comes off only after the repellent has had its initial cure.

Telling whether the repellent is working

A working repellent makes water bead up and run off the brick instead of soaking in and darkening it. After a rain, or with a spray bottle on a dry day, you can see which faces are still protected.

Beading is part of every visit our pros make to the chimney. When a face starts darkening evenly with water again, the repellent has worn thin there, and a new coat can be applied to that face, following the maker's reapplication advice. Faces in full sun and weather wear first, so they may need attention sooner than sheltered ones. Recoating only the worn faces keeps the cost down.

Free Inspection

Each face of the brick, tested free

Crown, cap and flashing checked for gaps a repellent can't fix
Damp signs on the chimney breast or attic side
Stone or veneer, and what its maker's guidance allows
Crown coating needs, kept separate from the brick repellent

Claim 10% off your first service

Damp brick or white bloom? First-time waterproofing is 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Does brick need sealing at all?

Is Waldo somewhere you waterproof chimneys?

Yes, Waldo is in our service area. Our pros run an absorption test on your free inspection, since the brick decides whether a repellent is worth it. Damp brick or white bloom are good things to mention up front.

Does the warranty cover waterproofing?

It covers our application, and the quote records the product, the faces treated and the date. Repellents wear with time and sun, so our pros check the beading on later visits and tell you when a face needs another coat. Reserve a free absorption test in Waldo at (352) 675-6366.

Our Services