Williston Highlands chimney waterproofing, breathable

Test patch first, full coat second. Chimney waterproofing done to the maker's rules in Williston Highlands, with a free inspection.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Cracks sealed before the brick is treated

Thinking about waterproofing the chimney because water keeps getting in? Start with the gaps. A water repellent reduces how much rain the face of the brick soaks up, but it can't close a cracked crown, a missing cap, worn flashing or open mortar joints. Water pours through those no matter what's sprayed on the brick.

Our pros fix the entry points first, then look at whether the brick itself is absorbing too much. If it is, a breathable repellent is the finishing step. If it isn't, you'll hear that too, and you won't pay for a coating you don't need. Speak with a local pro about waterproofing your chimney in Williston Highlands at (352) 675-6366.

Neither the Gulf nor Atlantic coast reaches Williston Highlands. Measured directly, about 26 miles separate Williston Highlands from the Gainesville reference point.

What's Included

Before and after the repellent goes on

Old film sealers identified before choosing a product
Crown membranes applied as a separate step
Cure times respected after repointing
Product and date recorded for the warranty in Williston Highlands

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Pressure washing before sealing

Thinking of pressure washing the chimney in Williston Highlands before it's sealed? That can blast mortar from the joints and leave the brick soaked for days. The Brick Industry Association advises checking with the brick maker before pressurized cleaning. Our specialists clean brick gently before treatment and repoint anything a past wash has damaged, then wait for the wall to dry.

Our Process

Coating your chimney in Williston Highlands

Close the gaps

Crown, cap, flashing and joints are repaired first, since a repellent can't seal them.
Test the brick

Absorption is measured on each face and a test patch is checked with you.
Mask and apply

Glass and trim are masked, and the repellent goes on bottom up on dry brick.
Record and recheck

You get the product, faces and date written out, and we check beading on later visits.

Why Choose Us

Waterproofing from a local family business

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Before any spraying starts, windows, trim and plants are masked and covered.

Free inspection firstA brick absorption test is part of the free inspection, so you know if waterproofing is worth it.
No hidden fees, all upfrontNo hidden fees on waterproofing in Williston Highlands; masking, testing and cleanup are in the price.
Family owned and runWe're family owned, and we'll tell you when your chimney doesn't need a coating.

Call (352) 675-6366 Get a Free Inspection

Breathable repellents, explained

A breathable, or vapor-permeable, repellent soaks into the brick and lines the walls of its pores instead of forming a skin on top. Liquid water beads on the surface and runs off, while water vapor from inside the wall can still pass out through the pores.

That balance is what a chimney needs, since some moisture gets in from the top, the flue and the air on any chimney. Our pros use penetrating repellents made for masonry and chimneys, and they name the product on your quote. Afterwards the brick looks much the same, with water beading on it. That's the look you'll see on the test patch.

Silanes and siloxanes

Most penetrating masonry repellents are silanes, siloxanes or a blend. The Brick Industry Association describes silanes as smaller molecules that penetrate deeply and need alkaline conditions to react, and siloxanes as larger molecules that bond well with the silica and alumina in brick.

Maker products blend and modify them for particular uses, and chimney repellents are formulated for the heat and moisture a chimney sees. Our specialists choose the product for your brick, test it on a patch, and apply it by the maker's data sheet. The chemistry matters less to you than the result: brick that sheds rain and still breathes.

What a repellent can't do

A penetrating repellent lines pores; it doesn't fill gaps. Water running into a crack in the brick, a gap at the flashing or a recessed mortar joint goes straight past it, and the Brick Industry Association notes repellents seldom stop water entering through anything beyond very fine cracks.

That's why a repellent alone rarely fixes a leak. Our pros find and close the gaps with the right repair, whether that's repointing, crown work or new flashing, and use the repellent to cut down what the sound brick absorbs. Expecting the coating to do the repair's job is how money gets wasted.

Free Inspection

Tested first, priced second

Any old sealer, paint or film on the brick surface
White bloom or salt deposits, and where the water behind them comes from
Crown coating needs, kept separate from the brick repellent
Whether the chimney needs a repellent at all

Claim 10% off your first service

Take 10% off your first waterproofing job when you book today.

Call (352) 675-6366 Get a Free Inspection

FAQs

Things to ask before sealing brick in Williston Highlands

Why not use a clear sealer from the store?

Many are film-forming sealers that slow the brick's drying and trap water and salts. Our specialists use breathable, penetrating repellents made for chimney masonry instead.

Do you seal the crown too?

The crown gets a separate flexible coating made for concrete, applied as its own step. The brick gets the penetrating repellent. Both are priced separately.

Our Services