Your chimney brick kept dry in Williston, FL

Damp brick or white bloom on the chimney? Book a free inspection in Williston and find the cause before sealing anything.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

Crown sealing is a separate job

Want the whole chimney top waterproofed? The crown takes a different product from the brick. Brick gets a penetrating repellent that lets it breathe; a concrete crown gets a flexible coating that forms a waterproof membrane over hairline cracks.

Our specialists seal the crown and treat the brick as two steps, each with the right material and each priced on its own line. Putting a brick repellent on a cracked crown won't stop water, and putting a crown coating on brick would trap moisture. Reserve crown sealing and brick waterproofing together in Williston at (352) 675-6366.

Williston recorded a population of 2,976 in the 2020 Census. Williston is an inland service location, separate from the sea coast.

What's Included

What a waterproofing visit covers in Williston

Test patches checked before the full coat
Efflorescence brushed off before treatment
Beading checked on follow-up visits
Treated faces recorded for homes in Williston

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Idle chimneys still get wet

Even with no fire in years, a chimney in Williston still takes rain on every face. Without the warmth of regular fires, damp can linger in the masonry longer. Our pros check idle chimneys for gaps and absorption the same way as busy ones, and recommend a repellent only where testing shows the brick needs it.

Our Process

Gaps closed before any repellent goes on

Close the gaps

Crown, cap, flashing and joints are repaired first, since a repellent can't seal them.
Test the brick

Absorption is measured on each face and a test patch is checked with you.
Mask and apply

Glass and trim are masked, and the repellent goes on bottom up on dry brick.
Record and recheck

You get the product, faces and date written out, and we check beading on later visits.

Why Choose Us

We test the brick before sealing it

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

Our specialists will say so when a chimney in Williston doesn't need waterproofing.

Free inspection firstA brick absorption test is part of the free inspection, so you know if waterproofing is worth it.
No hidden fees, all upfrontNo hidden fees on waterproofing in Williston; masking, testing and cleanup are in the price.
Family owned and runWe're family owned, and we'll tell you when your chimney doesn't need a coating.

Call (352) 675-6366 Get a Free Inspection

Test areas before the whole chimney

Trying a repellent on test areas before treating a whole wall is what the Brick Industry Association recommends. On a chimney, that means a patch on a less visible face, left to cure and then checked.

Two results matter on the patch. Water should bead and roll off. The brick's color, sheen and texture should look unchanged. If either isn't right, the product or the method changes before the full coat goes on. It adds a short wait to the job, and it's the surest way to avoid a chimney that looks blotchy or doesn't shed water. The patch location is noted on the quote.

How the repellent is applied

Wet and generous is how a penetrating repellent goes on. Makers such as SaverSystems describe a low-pressure flood coat applied from the bottom of the wall upward, so the brick takes in what it can and the excess runs down onto brick that's still being treated.

Working one face at a time, our pros follow the maker's instructions for the product used and watch for runs and missed spots. They don't mist it on with a high-pressure sprayer, which wastes product and drifts onto glass and plants. The result is an even coat that the brick absorbs fully. The number of coats goes on the quote.

Keeping a record of the treatment

Repellent coats wear gradually, and it's easy to forget when it went on and which product was used. Our pros write both on your quote, along with the faces treated and the maker's guidance on checking and reapplying.

That record helps at the next visit, when they check the beading and decide if a face needs another coat. It also helps if you sell the house, since a buyer's inspector may ask what's on the brick. Using the same product or a compatible one for recoating avoids problems with layers that don't bond to each other. It's a small step that saves guesswork later.

Free Inspection

Each face of the brick, tested free

Absorption of the brick, tested with a tube on each face
Damp signs on the chimney breast or attic side
Weather side and sheltered faces compared for exposure
Product choice, number of coats and the maker's weather window

Claim 10% off your first service

Keep the brick dry in Williston with a 10% discount on a first job.

Call (352) 675-6366 Get a Free Inspection

FAQs

Does brick need sealing at all?

How do you know the brick needs it?

Our pros test absorption with a small water tube on each face. Brick that takes in water quickly is a candidate; brick that barely absorbs doesn't need treating.

What if my chimney is painted?

A penetrating repellent can't soak through paint. Our specialists look at what's under the paint and may suggest a breathable masonry coating instead. Talk to us about your painted chimney in Williston at (352) 675-6366.

Our Services