Fireplace installation around High Springs, FL

No fireplace in the room yet? Local pros plan one around your room in High Springs, starting with a free visit.

Family owned and run
Free inspection first
100% satisfaction, guaranteed
Locally owned and operated

Call (352) 675-6366 Get a Free Inspection

Request a Free Inspection

Prefer the phone? Call (352) 675-6366

A fireplace for a home you're building on

Adding a room to the house and want a fireplace in it? It's far easier to plan during the addition than to add later. The footing, the framing, the chimney route and the outside air can all be built in from the start.

Working with your builder, our specialists sort out where the fireplace goes, what the framing needs and how the chimney or vent will pass through the new roof. The quote separates our work from the builder's. Planning early saves opening finished walls later. Reserve a fireplace planning visit for your addition in High Springs by phoning (352) 675-6366.

When the 2020 Census counted High Springs, it found 6,215 residents. The Gulf and Atlantic shorelines are away from High Springs.

What's Included

Wood, gas and electric, planned and fitted

Electric fireplaces mounted, recessed or inserted
Brick fireplaces built on their own footing
Outside air supplies planned with the fireplace
Break-in steps given for units installed in High Springs

Call (352) 675-6366 Get a Free Inspection

Local Conditions

Permits in an inland home

For a fireplace installation in High Springs, approval requirements depend on the appliance and the proposed building work. Ask which inspections are needed before enclosure and completion, and who will arrange them. Clarifying those steps helps avoid planning the finish around an unconfirmed installation date.

Our Process

Planning to first fire

Look at the room

The wall, floor, attic and roof are looked at, then the fireplace options that fit are laid out.
Plan and price

You choose a unit, and the quote lists every part, trade, permit and inspection.
Install and check

The unit and its chimney or vent go in to the manual, with clearances checked before walls close.
Test and hand over

The unit is tested, you're shown how to use it, and you get the break-in steps noted on the quote.

Why Choose Us

Fireplaces installed to the listing in High Springs

Locally owned and run
A family-run company
100% satisfaction guarantee
Your inspection is free
Same-day visits available
Arrange a visit, take 10% off

The quote names the trade for gas lines, circuits and roofing.

Your written price is freeEach fireplace option for your room is given its own price, free and side by side.
Family owned and runFamily-run planning for your fireplace in High Springs, as careful as if it were going in our own home.
100% satisfaction, guaranteedThe install isn't done until you're happy with it. That's our 100% satisfaction guarantee.

Call (352) 675-6366 Get a Free Inspection

Three questions about your room

Before any model is chosen, our pros look at three things. The wall: an outside wall lets a gas unit vent straight out, while an inside wall means a chimney through the attic. The floor: it has to carry the unit, its hearth and, for masonry, a footing.

What's above: any wood-burner has to send its smoke up through the ceiling and the roof, clear of framing and at the height its maker or the code calls for.

Those answers narrow the options quickly. You'll hear which kinds of fireplace fit your room, which don't, and why, before anything is priced or ordered.

Hearths for factory-built units

Every factory-built wood fireplace needs a hearth extension, and the building code sends you to the unit's listing for its size and material. The code also wants that extension to stand out clearly from the surrounding floor, and hearth extension products carry a UL 1618 listing.

Working from the manual, our specialists pick a hearth material that meets it and suits your floor, and set it so its edge is clear to anyone walking by.

Some gas units need no hearth extension at all, and some need a noncombustible floor under the unit. The manual decides, and our pros follow it to the letter.

Where the chimney leaves the roof

A factory-built chimney passes through the roof with parts from its maker: a roof support where needed, a sealed storm collar and the listed termination cap on top. Its height above the roof follows the maker's rules for distance from nearby roof surfaces.

The roofing around the new opening has to be weathered in so it doesn't leak, and on many roofs that's a roofer's job, working with the maker's roof parts.

With the opening cut and the listed parts fitted, our pros coordinate with your roofer so the roofing is sealed properly around the new chimney. The quote shows who handles each part.

Free Inspection

On your free planning visit

The wall, floor and space above where the fireplace would go
Floor framing or slab under the unit and hearth
Room size and use, for sizing the unit
Clearances to framing, trim and mantel from the manual or code

Claim 10% off your first service

Reserve your install today, and as a first-time customer take 10% off.

Call (352) 675-6366 Get a Free Inspection

FAQs

Fireplace installs, the short version

Can you install a fireplace in High Springs?

Yes. Our installers work in High Springs, and the planning visit that covers the room, the attic space and the roofline is free. Have a spot in mind for the fireplace? Share it on the phone.

Why does a new fireplace smell at first?

Paints and materials in the unit cure during the first few fires. Makers advise opening windows and running a fan until it passes, and our pros give you the break-in steps spelled out.

Our Services